Construction of 50TPD Material Resource Facility Building at Sekkadu Compost Yard in Ward no 37

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Narrow Foundations - First Depth Upto 2.00M

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete Excavation

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Upto Basement

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying and filling in foundation and basement with stone dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8" X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Upto Basement

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8" X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Plain Cement Concrete 1:1.5:3 (one cement, one and half Crushed Stone Sand (M- Sand) and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges etc., complete as per standard specification

Plastering with cement mortar 1:5 (One cement and five plastering sand (P- Sand)) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Towards cost of Geophysical investigation survey charges.

Supply and delivery of 200mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification `WD-M0031

Supply and delivery of 150mm dia of (Casing medium) PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make WD-M0022

Supply and delivery of 150mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification WD-M0027

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. Drilling 150mm dia pilot bore to the required depth Below ground level.WD-W0783

Drilling 150mm dia pilot bore up to 60 m to 90 m from Ground level.WD-W0784

Drilling 150mm dia pilot bore up to 90 m to 120 m from Ground level.WD-W0785

Drilling 150mm dia pilot bore up to 120m to 150 m from Ground level.WD-W0786

Drilling 150mm dia pilot bore up to 150m to 180 m from Ground level.WD-W0787

Supply and delivery of 200mm dia(8”) PVC end cap including cost and conveyance etc., complete WD-M0115

Reaming from 150mm dia pilot bore to 300mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level WD-M0794

Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 150mm dia PVC casing pipe WD-M0772

Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method.

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell Three phase submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).WD-M1912

Supply and Delivery of 4 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc WD-M1925

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection Clamps,Pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days WD-M0871

Supply and run off 4 to 6 Sq.mm polythene insulator and PVC sheathed (Heavy Duty) service meter Aluminium cable of 1100 V grade on bearer wire for servive connection mains WD-M1959

Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete MS Pipe clamp set

50mm pvc bend

50mm G.I Elbow

50mm G.I Union

50mm gate valve

50mm U Pvc Pipe

50mm pvc pipe

50mm pvc Tee

20mm dia G.I Tee

20mm dia G.I Elbow

20mm dia Pvc Tap

20mmdia GI Coupler

saddle piece

Supply and delivery and fixing of HDPE tank 5000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixnig charges as directed by TWAD Board officers etc.,WD-M1420

Construction of Brick work for HDPE tank with Pcc in 1:2:4 and Brick work CM:15 using II class ground moulded brick in size of 8 3/4 x 4/2 x 3/4, Earth filling, plastering CM 1:5 20mm thick, painting, etc., complete

Supply and fixing of 25mm G.I. service pipe with bend including cost and conveyance etc., complete., as per standard specification as directed by the departmental officers WD-M1421

Supply and fixing of 0.75 x 0.75 x 0.45 size made up with MS angle and plats of a kiosk erected on a masonary pedsal for protecting accessories etc., complete complying with standard specification.

Laying & Lowering of Pipe line extn complete as per the standard specification

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour SD 457

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand earth to make good (SD 180)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) (SD 18 Pg No 11)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD 36 Pg No 22)

Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications (SD 87 Pg No 41)

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing SD 149

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark etc, complete as per standard specifications (SD 539 Pg No 234)

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m etc, complete as per standard specifications (SD 75 Pg No 38)

Supply and run of 4 X 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains etc, complete as per standard specifications.(SD 68 Pg No 36)

Supplying and laying of PVC insulated, PVC sheathed, armoured, LTUG cable of size 2 core 10 sqmm Al.cable clamped on walls

Supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification.SD 160

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with 1No 63 Amp 30MA Four Pole RCD/RCCB (LowerEnd) with suitable necessary connection with earth connection complete.(SD 132 Pg.No 60)

Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch (Front Handle) as outgoing with suitable adoptor box with suitable MS cable entry box trunking boxes and internal connections on internal connections on suitable AI frame work with earth connection etc, complete.(SD 156 Pg.No 68)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work with PWD earthing etc, complete.SD 173

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD 211 Pg.No 86)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG Cu wireand making good of the concealed portion with suitable colour (SD 57 Pg.No 32)

Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side) etc, complete as per standard specifications (M-1278)

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Design, Supply, fabrication, erection & commissioning manual segregation Conveyors to segregate the larger material from the garbage manually. Capacity: 25 MT per hour, Length- 15 meter, width of belt - 1.2 meter& 4 ply, 10 mm thick rubberized with 5 HP motor or more and gearbox. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make: Kirloskar/ABB/Crompton Greaves, Gear Boxes: Shanthi Gears/ Premium. Electrical Items: Schneider/Legrand/ABB/L&T/Polycab/Crompton. Conveyor Belt: Plyconor Dunlop M24 cover grade. Structural Steels shall be IS226 grade. MS plates shall be IS.2062 grade B with suitable contro panel and electrical connections

Feeder Conveyor: Design, Supply, fabrication, erection & commissioning of feeder Conveyors to convey the manually segregated garbage into the trommel. Capacity: 25 MT per hour, Length- 12 meter, Height 3.5 m fromground level for the input to trommel with 5 HP motor or more and gearbox. Width of belt- 1.2 meter, 4 ply,10 mm thick rubberized. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter.It is driven by electric motor and gear box. Motor make:Kirloskar / ABB / Crompton Greaves, Gear Boxes: Shanthi Gears/Premium. Electrical Items: Schneider/Legrand/ ABB/ L&T/ Polycab/ Crompton. Conveyor Belt: Plyconor Dunlop M24covergrade. Structural Steels shall be IS226 grade. MS plates shall be IS. 2062 grade B with suitable control panel and elecrical connections

Trommel :Design, Supply, fabrication, erection & commissioning of Heavy Duty Trommel suitable for input capacity of 25 MT per hour with 100/75 MM Holes, Rotary type, with 15 HP Motor & Gear Box, Length 7.5 Mtrs, Ø 1.8 Meter or higher. 8mm thick MS plate. Internal MS guiding blades with 100 mm length, 8 mm thickness and 150 mm spacing. Height from the ground is 3.5 meters at bottom. Air blowing arrangement shall be provided for efficient Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make: Kirloskar/ABB/Crompton Greaves Gear Boxes: Shanthi Gears/Premium. Electrical Items:Schneider/Legrand/ ABB/ L&T/ Polycab/Crompton. Conveyor Belt: Plyconor Dunlop M24covergrade.Structural Steels shall be IS226 grade. MS plates shall be IS.2062 grade B with suitable control panel and elecrical connections

Trommel Reject Conveyor : Design, Supply, fabrication, erection & commissioning of Trommel Reject Conveyor Capacity: 10 MT per hour, Length- 10 meter with 5 HP motor and gearbox. Width of belt- 1.0 meter, 3 ply, 8 mm thick rubberized. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make: Kirloskar/ABB/Crompton Greaves, Gear Boxes: Shanthi Gears/Premium. Electrical Items: Schneider/ Legrand/ ABB/ L&T/ Polycab/ Crompton.Conveyor Belt: Plyconor Dunlop M24 covergrade .Structural Steels shall be IS226 grade.MS plates shall be IS.2062gradeB, with suitable control panel and elecrical connections

Process Feeder Conveyor: Design, Supply, fabrication, erection & commissioning of Pulveriser feeder Conveyor. Capacity: 15 MT per hour, Length- 12 meter , with 5 HP motor and gearbox. Width of belt- 1.0 meter, 3 ply, 8 mm thick rubberized. Equipment will be supplied with all necessary attachments, angles, accessories and complete electrical wiring till the central panel board and starter. It is driven by electric motor and gear box. Motor make: Kirloskar/ABB/Crompton Greaves, Gear Boxes: Shanthi Gears/Premium. Electrical Items: Schneider/ Legrand/ ABB/ L&T/ Polycab/ Crompton. Conveyor Belt: Plyconor Dunlop M24 cover grade. Structural Steels shall be IS226 grade. MS plates shall be IS.2062 gradeB, with suitable control panel and elecrical connections

Organic Pulveriser- Heavy Duty : Design, Fabrication, Supply, Erection, and Commissioning of Bio-degradable shredder machine having a output capacity of 15 tons per hour. The motor for operating machine should have 40 HP or more, 3 Phase, 1440 RPM, ISI reputed motor and Input throat Size of 1000mm length for efficient cutting of Bio degradable waste, having the rotor drum of 600mm fitted with hardened cutting blade with suitable angle matching or its equivalent as per the standard including all cost and conveyance of all materials and Erection. It is driven by electric motor and gear box. Motor make: Kirloskar/ABB/Crompton Greaves, Gear Boxes: Shanthi Gears/Premium. Electrical Items: Schneider/ Legrand/ ABB/ L&T/ Polycab/Crompton. Conveyor Belt: Plyconor Dunlop M24covergrade.Structural Steels shall be IS226 grade. MS plates shall be IS. 2062 grade B with suitable control panel and elecrical connections

Design, Supply, fabrication, erection & commissioning of Bailing machine capacity of 25 tonne, Materials of the bailing machine MS,Bailing machine for pressing/compressing products like plastic bottles,aluminium cans,disposal plastic items.etc.,hydralic vertical clamping force of bailing machine, chamber size in 700mmx500mmx1400mm, size of the bale 700mmx500mmx650mm,Weight of the bale 50 - 60kgs, cycle time per bale in minutes, number of cylinder 1, day light gap between bottom plate and pressing plate in 1400mm, 7.5HP motor power, 2 no of tiles of rope, Number of door 2, Thickness of the body plate 8mm, 30mm thickness of the clamping plate, electrical control system of the machine, Electric supply threee phase 440v 59 HZ,twine tying, overall the dimention of the machine in 3000mmx1025mmx1000mm, Overall weight of the machine in 600KG,Drainage system for the residual and fluid/liquid while crushing/pressing the material to be provided,

Design, Supply, fabrication, erection & commissioning of Twin Shaft Shredder for Municipal Solid Waste containing various objects such as plastic bottles, plastic waste , thrash waste, organic waste etc Heavy Duty Conveyor,Electric drive,Hexagonal Shaped,Input Electrical Supply Three phase (440 V. 50 Hz), Motor Power in HP @ 1440 rpm 7.5 HP,Motor class IE2,Control panel PLC Based, Independent electrical panel,Noise level in 65dB at 1 meter distance while working condition,100 lit capacity of waste bin, Length of shaft in mm with tolerance ±10 mm 650,Inside dimension of shredder chamber in 450mm x600 mm with tolerance ±5 mm,Opening of loading hooper in 500mm x 500mm with tolerance ±5 mm,Overall Dimesnion of shredding machine in 1560Length x1000 width x 900height ,weight of the machine 1200kg, Range of Capacity handled by Conveyor in TPD with 8 hour duty 3 to 5,Width of Belt for slider bed type/trough conveyor in 400mm,Type of Conveyor provided with Twin shaft shredding machine through conveyor,ISO certification number with details if no ISO certificate available put NA PICL/QMS/0419/2588 DT.16/04/2019

Design, Supply, fabrication, erection & commissioning of Over Band Magnetic Separator,Ferrite Magnet Used, type of Over Band Electro Magnetic Separators, application of Recycling Industry, Sewage Treatment, belt size 600mm-2000mm, and Vbelt type, It consists of two rolled and driven by geared motor at center stationery magnet is fixed and belt is passing through the magnet,

Design, Supply, fabrication, erection & commissioning of Stone seperator for removal of stone, jelly, pebbles, MS Materials,Automatic grade,Electric power source,50HZ frequency,340V voltage

Supply, fabrication, erection & commissioning of Sanitary Napkin Disposal Machine the machine type Cut-Off for Safety Plug and Play Operation,capacity 500 Pads/ Day,MS Powder Coated power,LCD Display with temperature and timer for safety,Low Energy Consumption,Radiation Technology with Refractory heaters

Design, Supply, fabrication, erection & commissioning of plastic waste washing plant Cast Iron materials, application for Washing Plastic Scrap,10HP power supply, Electric Driven Type, Frequency 50HZ,waste plant to wash the plastic scraps upto 200 KG per hour.etc

Provision of EB Panel board and other unforeseen items

Supply and Delivery of Backhoe Loader 220 LCM, model Mitsubishi S6K-TA61MHTA, Net Power ISO 9249 163PS,Bore 102mm,Engine power 163HP,Hydralic system - Main system Maximum Flow 212 Lpm,Swing Mechanism-13.0rpm,Maximum Swing Torque 60.4knm,Tank capacity 400L, Weights engine oil 25L,Hydraulic System 240lts,Operating Weight 21700kg.,etc

NAC INDUSTRIES (BID ID -1210752)