SMART PERIODICAL SERVICES AND EXTERNAL REPAIRS TO BLDG, COMMON AREA, STAIRCASE AND OTER PETTY MAINT WORKS IN HAMLA OFFICERS RESIDENTIAL AREA AT INS HAMLA UNDER GE (NW) BHANDUP

M & L for 15 mm (10+5mm) thick ready mix plaster using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified. Note:- Water proofing compound shall be measured & paid seperately.

M&L For Preparation old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. Note:- Work will be strictly executed by mechinised means/ tools as required for smart periodical services.

M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed.

M & L white cement based Wall care putty not less than 1mm thick on wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered old decorated surfaces of walls by Vacuum based sanding machine all as specified and filling cracks/hole by applying wall putty (multipurpose mixer will be used for uniform and proper mixing of putty) and applying one coat of distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary all as specified & directed by Engr-in-Charge. Note:- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

M & L for complete removal of existing treatment on surfaces of new/old walls, chajjas etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt, chalk, grease, fungus. Flakes etc applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldings complete all as specified and as directed.

Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed

M&L 10mm thick ready mix plaster , on fair faces of brick work or concrete surfacesl; finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L 5 mm thick ready mix plaster over concrete surfaces of ceiling surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 19,300.00 (Minus) as listed in Schedule of Credit. Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'. Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple buildings having 03 and above storey height. Necessary scaffolding and saftey measures required during execution of work are including in this items.

M&L for preparation of new plastered surfaces and applying three coats of cement base paint on wall complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed

M/L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M/L for french polishing on surfaces of any description width or girth and including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces one or more coat etc complete all as specified and directed.

Writing letter or figures (block, Roman, Italic, or Indian ) n.ex 20 cm height complete all as specified and directed.

M&L stops, commas, short lines, dashes, hyphens, brackets,etc.

M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint all as directed.

Taking down rain water pipe of any size and description including all fittings etc complete all as specified and directed.

M&L for Preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading of oil and greasy spots by scraping and washing with water and applying one coat of 100% antifungal acrylic emulsion paint upto 4th storey including necessary scaffolding as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed all as specified and directed by Engineer-in-Charge.

S&F of 160mm bore PVC rain water pipe single socketed (ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F of 110mm bore PVC rain water pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F 110mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

S&F of Stack clamp out of 50mm by 5mm flat iron and 16mm dia round ion stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia pipe complete all as specified and directed..

S&F of Stack clamp out of 50mm by 5mm flat iron and 16mm dia round ion stays, including bolts and nuts and securing ends of stays to wall or roof for 160mm dia pipe complete all as specified and directed..

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each

Taking down shutter of any description exc 1.00 but n exc 2.00 sqm each complete all as specified and directed.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

Taking down door shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

Taking down door shutter of any description n exc 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as required etc complete all as specified and directed.

Dismantling of boarding ,any description and in any position complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws for kitchen cabinets or shelves, drawers of any shape and size having particians(vertical or horizontal) including fixing with screws and fixing of all necessary fittings like hinges of any type, Handles rollers or shelves, magnets. etc. to timber complete all as specified and directed.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

M&L for post construction anti- termite traetment along the external wall below concreate or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed.

M&L for post construction anti- termite of soil / concreate under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement morter 1:2 to match the existing floor etc complete all as specified and directed.

M & L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per holy by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick and fixed in repairs complete all as specified and directed.

Supply only sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

All as per item No 72 but angle cock Chromium plated 15mm bore dia complete all as specified and directed.

S&F MS flot iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0.

S&F 35mm 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

S&F of 160mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

Supply & Fixing aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

Supply & Fixing in repairs aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F stainless steel butt hinges 100mm size complete all as specirfied and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed.

S/F 150mm length extruded aluminium alloy handles,fabricated type, anodised.

S&F 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F 300mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed. complete all as specirfied and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed..

Preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described over 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces.

S&F in repair pvc cabinet mirror in of size 600X450 mm complete all as specfied and directed. Make: poly tuf or Prayag polymers pvt ltd.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per item no. 66 above but 20mm bore of pipe complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

All as per item no.68 above but 20mm bore dia complete all as specified and directed.

M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.Make-Jagwar/Parryware/Hindware

S& fixed in repairs pillar tap 15mm dia cast copper alloy chromium plated fancy type complete all as specified and directed.

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) fixed to chowkats etc complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 46

M & L Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed.

M & L Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 40 mm dia complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

0mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.