Tambaram Balance

Amount

Supplying and filling in plinth with " M" sand under floors, including watering, ramming, consolidating and dressing complete.

Taking out thermal insulation proof in wall and ceiling made up of glass wool packing covered with 4mm thick cement board including its MS angle slotted frames with proper safety arrangements and disposal of the same away from the site all complete as directed by the Engineer-in-c.

Providing and fixing double scaffolding system using casurina post and blanks on the exterior/ interior side, up to seven story height for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work

40 mm nominal outer dia. Pipes.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

100 mm diameter

Providing and fixing C.P. brass mixer 2-in-1 complete set for cold water and geyser line of METRO make using necessary fittings like CPVC assembled set for making connection all complete as directed by the E-in-C

15mm nominal bore

Providing and fixing 100 mm stainless steel grating for gully trap.

Taking out the existing PVC door and repair the shutter by cutting to the requied height and refixing with new SS hinges and making good the door to facillitate easy opening all complete as directed by the Engineer-in-charge.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Carriage of dismantled Aluminium partition materials like Aluminium frames and particle boards and MS windows from FF, SF ,MF and TF to Canteen block at GF by head loads and stacking at site all complete as directed by the Engineer-in-Change

Total quantity-990 sqm

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.

Shifting of MS cup boards, Tables, Chairs , old records etc. from SF and third floor of TE building to canteen block at GF by head loads and stacking at site all complete as directed by the E-in C. SF-Steel tables-10 nos,MS bureos-4 Nos, chairs-15 nos, Old records, training materials-20 bundle.TF-MS bureo-1NO,Steel Tables-2 nos, old records-20 bundle.

Providing and fixing sliding door for disabled employees Toilet at GF using available aluminium frames and purchasing cement boards for panels and required "C" sliding channel, wheels and other fittings etc. all complete as directed by the Engineer-in-Charge. size:1.0x2.10

Providing and fixing aluminium window fastener (handle) with necessary screws etc. complete.

Providing and fixing powder coated MS window fastener( handle) including necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

250 mmX16mm

Deep Cleaning of toilets water closet and wash area wall and floor tiles, urinal panel , wash basins, platform etc. using toilet cleaning acid /chemicals to remove off the stains, dirt etc. to facilitate comfort usage all complete as directed by the Engineer-in-Charge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and laying polished Kota stone in landings, steps including rounding of edges, in approved colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

100x100 mm size P type ,With common burnt clay bricks

Repairs to windows by easening, renewal of damaged putty and lubricating the hinges all complete

Credit for dismantled , unserviceable and un accountable materials like MS windows, slotted angles etc. all complete as directed by the Engineer-in-charge.