REPAIR RESURFACING OF ROAD AND ALLIED WKS INCLUDING REPLACEMENT OF ROAD FURNITURE FOR AF SCHOOL AND CIVIL AIRPORT UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA

Amount

M&L for repair to pot holes exc 30 mm depth and n. exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc cutting around edges to at least 25 mm in depth and making good by applying tack coat with paving bituminous primer VG-10 penetration @ 5 Kgs per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with paving bitumen VG-30 grade @ 9.8 Kgs per 10 Sqm blinded with 0.09 Cum of stone chipping of size 6.3 mm and again well rolled with 8 to 12 tonne power roller (Including supply of pre-mixed macadam, binder and chipping) complete all as specified and directed.

M&L preparing existing black top surface or bituminous macadam surfaces by brushing with wire brushes for removing caked mud, vegitation growth, small bushes etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top/ concrete surfaces and applying evenly a priming/ tack coat with paving bituminous primer VG-10 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L applying bituminous premix dense asphaltic concrete (DAC), 30mm thick (consolidated thickness) with 6% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L premix bituminous macadam laid, rolled (with using 8-12 tonne power roller) and compacted to required gradient and camber in n.exc 75 mm thickness (consolidated thickness) with binder content of 4% by weight of total mix, content of paving bitumen VG-30, mixed in hot mix plant and laid by mechnical paver finisher complete all as specified and directed.

S&F in repair solar cat eye road studs of cast aluminum alloy shell (100% water proofing design according to IP 67) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency visual distance upto 500 mtr with 6 super bright yellow/red/amber led (3 Nos each side) with flash frequency 2 Hz including solar panel 2.4V/0.3 watt, one Ni-Cd/Ni-mh rechargeable battery (1.2V/1600MA), temperature range 100C to 750C fixed on road for roadway sign complete as per manufacture’s instruction, as specified and directed. Make : Darkeye Model DA 110 (DHURV) or equivalent in 3M/TATA

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign materials etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed. Note - MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair road studs made of polycarbonate moulded plastic body of single shank of size 100 x 100 x 26 mm of min weight of 140 gms with electronically welded micro prismatic lense on both side of colour - Yellow/Red/Amber for maximum retro reflection in wet and dry conditions and to be fixed on road with shank as road sign complete all as per manufacturer instructions complete all as specified and directed

S&F in repair ABS plastic speed bump/speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 70 mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed.

S&F in repair road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10mtr long and dia of pipe is 80 mm embedded with PCC type B-1,1:2:4 (20mm graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the MS pipe on ground with hold fast using PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete all as specified and directed.

M&L for 75mm thick PCC type D2 1:4:8 (40mm graded agg) as in sub-base, sub-floors, etc. including demolition of existing cement concrete complete all as specified and directed.

M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of existing paver blocks complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), making drainage opening wherever required including taking down old damaged kerb stone with necessary excavation complete all as specified and directed.

M&L for preparation of new brick/concrete/AC surface and applying two coats of synthetic enamel paint over a priming paint plaster coat on brick/ concrete/ AC surface complete all as specified and directed.

M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth and applying two coats of synthetic enamel paint over on brick/concrete/AC surface complete all as specified and directed.

M/s J S & SONS

M/s M S Sharma and Co.

Gupta Automobiles

M/s K S Builders

Sethi Brothers