SPECIAL REPAIRS TO SWIMMING POOL UNDER AGE BR WEST UNDER GE (W) COLABA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L coloured glazed digital ceramic wall tiles 350x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in white cement mixed with pigment to match the shades of the tiles all as specified and directed. Make : Johnson / Kajaria / Nitco

M&L 15mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes like tiles all as specified and directed.

S&F in repair coloured glass mosaic tiles having computer graphic design of size 25mm x 25 mm x 5mm jointed & pointed with white cement mixed with admixture to match with the colour of tiles including Acid cleaning as in vertical & horizontal surfaces. Note: 1.The tiles shall pasted as per the computer graphic design/CAD given by Garrison Engineers fixed in different locations. 2. Rate inclusive of necessary scaffolding upto height of 9 metre above or below ground level

S&F in repairs coloured glass mosaic tiles of size 25mm x 25 mm x 5mm or any other size as approved for Swimming Pool following SOP for walls and floor with white cement based high performance high strength tile adhesive mixed with latex admixture ( MYK LATICRETE 335 OR ARDIFLEX S1 WHITE of Ardex endura ) or other equivalent approved by Engineer-in-Charge and jointed & pointed with epoxy tile grout ( MYK LATICRETE SP 100 or equivalent) to fill the wide joints of glass mosaic tiles and pointed in matching colour with the colour of tiles using water proofing tile in vertical & horizontal surfaces all to manufacturer’s printed instructions and laid to approved pattern on backing screed (screed bed measured and paid separately). Note : (a) Tile should be applied by experianced applicator who has completed swimming pool work at other places. Applicator must show its completed projects application to Engineer-in-charge before going ahead with works (b) Tile design sample has to be produced by the contractor and passed by GE before application. (c) For bonded screeds the concrete base, concrete floor should be water washed with jet so as to remove any contaminants such as oils, shutter release agents and curing agents. Any laitance arising through the application of the concrete should be removed mechanically. The surface should be wetted for several hours (preferably overnight), any excess water removed by brushing off. Within a period of 30 minutes (less in hot weather) before the screed is laid, a thin layer of neat cement slurry of creamy consistency should be brushed into the surface of the concrete base and the screed placed and compacted whilst the slurry is still wet. A proprietary bonding agent may be used instead of the slurry or a proprietary bonding admixture may be used in the slurry.

M&L for under tile water proofing membrare in two layers and over screed bed floor and wall finishes of swimming pool mosaic tiles complete all as specified and as directed by Engineer-in-charge. Make : WPM 002 of Adrex Endura or Dr. Fixit Fastflex or equivalent as approved by Engineer-in-Charge.

M&L for 15-25 mm epoxy resin based ready mix mortar with guneting process or with pressure pump in screed bed for laying floor and wall finishes of swimming pool mosaic tiles in single or double layer as required over concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished even & smooth without using extra cement all as specified and as directed by Engineer-in-Charge.

M & L for 25-30 mm Thick Polymer modified fiber reinforced ready mix mortar in screed bed using guniting process for laying floor and wall finishes of swimming pool mosaic tiles in single layer concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth witjhout using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for grouting, providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of ready made epoxy grout by pressure grouting for column, beams and slabs, including sealing the holes with Polymer modifed cement as above all as specified and directed. Make: Smart Care Tile Grout - Epoxy based by Asian Paints, Berger Home Sheid Tile Grout, as approved by GE.

Demolition of brick work or stone/boulder masonry built in cement mortar, including all quoins, arches, pillars, etc all as specified and directed.

M&L for fly ash brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L rendering 10 mm thick in CM (1:4) on fair faces of brick work finished surfaces even and fair all as specified and directed.

Material and labour for MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-30 grade (using 12.5 mm graded crushed stone aggregate) as in flooring as well as all other similar works all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregate) as in floor, finished cement concrete surfaces even and smooth using extra cement all as specified and directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

M&L mild steel TMT bars any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M&L hard drawn steel welded wire fabric mesh, 100 x 100 x 3mm dia cut to lengths bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied anchored over 3 to 4 inch long iron nails at a distance of 0.6 m in both direction and fixed in walls reinforcemnt for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it. The rate quoted shall deemed to include for straightening, raking or circular cutting and waste. Rates also include for straightening where reinforcement is supplied in rolls/coil all as specified and as directed

M&L for applying pressure guniting in cement mortar 1:3, average thickness 30mm to 50mm, removing loose, disturbed or disintegrated old concrete/ brick surfaces of walls, RCC beam, column, lintel, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, applying pressure guniting in cement mortar 1:3, average thickness 30mm to 50mm and there after rendering 10 mm thick plaster in cement mortar 1:3, mixed with water proofing compound in the ratio as per the manufacturer's instructions and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour and safety arrangement for guniting work all as specified and directed. Note :- (i) The finished level of the surfaces shall be matched with the existing surface. WPC shall be measured & paid separately as supply only) (ii) Provision of additional reinforcement steel in case required and ordered shall be measured and paid separately.

M&L for plastering 12 mm thick average Polymer modified mortar (ready mix pack) in finishnig coat after guniting, finishing the surfaces even and smooth without using extra cement, curing and removing the debris outside MD lands as per manufacturer's instruction all as specified and as directed. Note;- Rate of polymer included in quated rate. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, Shali Fix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE

Demolition of reinforced cement concrete of any description and in any position like RCC chajjas, slabs, beams, columns etc not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removing the retreived debris out side MD land all as specified and directed.

M&L for RCC work as in columns, beams, slabs, retaining walls, chajja, railing or similiar work using M-30 grade (Design Mix) delivered on banker from authrorised manufacturung plant mixed with required plastesizer plant using 20 mm nominal size crushed stone aggregate including shuttering, necessary equipment needed to carry out the work for finishing (compactor, vibrator, Trowel, groove cutter etc ) with provision for joints complete all as specified and as directed by Engineer-in-Charge. Note : Item will be inclusive of Curing compound which will be spread unformly over fresh concreting.

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from at all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc or in any similar work all as specified and directed.

M&L any coloured digital ultra strong/ heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square/ Rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles thick in cement plaster in CM (1:4) for fixing tiles anywhere all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works all as specified and directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in skirting, steps risers, wall dado and all other similar works all as specified and directed.

All as per item No 29 above but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:3 all as specified and as directed.

M&L 40-50 mm heavy duty durable moulded stone tiles any shape and size exc 0.20 but not exc 1.0 sqm and colour in floors etc. with and including moulding fixed with tile adhesive and pointed with epoxy grout to match the shade of the tiles all as specified and directed.

Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water all as specified and as directed

M&L for Ready mix plaster for internal/ ceiling plastering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces after taking down off old cement plaster and cement mortar including use of scaffolding and removing debris outside MD land all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) birla wall care putty all as specified and as directed. Make : Asian Paints / Berger Paints / Nerolac

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) birla wall care putty all as specified and as directed. Make : Asian Paints / Berger Paints / Nerolac

M&L for complete removal of existing treatment on wall surfaces, over 10cm girth, preparation of surfaces, filling cracks with approved crack filler applying two coats of water proof acrylic elastomeric paint (Rain coat of Dr. fixit or equivalent), over a coat of Dr. Fixit prime seal or eqiuvalent wall primer as if required complete all as specified and as per manufacturer's instruction. Make : Dr. fixit / Asian Paints or equivalent.

M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces including rubbing with sand paper, preparatory to base coat and applying two coats of weather proof acrylic exterior paint (100% Acrylic) at any height all as specified and directed. Make : Apex Ultima Proteck or equivalent

M&L for complete removal of old decorated steel surfaces of any description over 10 cm width or girth, applying two coats of epoxy paint over a coat of epoxy primer. Make : Asian Paints Ppg or equivalent

M&L for installing swimming spring board or diving board of minimum 3m long that is itself a spring, i.e. a linear flex-spring, of the cantilever type large size all as specified and directed.

Supply and fixing powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing, screws, handles, hinges, tower bolts etc. including taking down of old unserviceable frames/shutter all as specified and directed. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) The rate quoted shall be deemed to be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Supply and fixing in repair of 18mm thick Marine Plywood laminated of, prelaminated one side with any colour with High glossy acrylic sheet of 3mm thick lamination & other side balancing white lamination, including 1st class teak wood lipping over cut surfaces, fixed with nails to timber work grade I as per IS 14587, for frame and shutter for kitchen cabinets all as specified and directed. Make:- Action Tesa, Greenply

Material and labour for 6 mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beading or glazing in squares all as specified and directed.

Supply and fixing Sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions all as specified and as directed

Supply and fixing in repair brass locker for each cupboard, 75 mm size two butt hinges, medium weight, cold rolled mild steel, 40 mm dia, cupboard knobs fixed with nut, screws and washer of brass all as specified and directed.

Supply and fixing in repair medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing complete all as specified and directed. Make : Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

Supply and fixing in repair two piece EWC water closet Single Piece EWC 640 X 360 x 685 mm including Cistern, PP Soft close seat cover and hinge, fitting accesorries, Accesories set and cistern fittings, fixed with waste coupling and waste pipe all as specified and directed. Make : Cat Part No SLS-WHT-6851P180PP having P Trap of Jaquar or Equivalent in Cera / Parryware / Prayag

Supply and fixing in repair Two piece EWC water closet single piece EWC 640 X 360 x 685 mm including cistern, PP soft close seat cover and hinge, fitting accesorries, Accesories set and cistern fittings, fixed with waste coupling and waste pipe all as specified and directed. Make : Cat Part No SLS-WHT-6851P180PP having P Trap of Jaquar or Equivalent in Cera / Parryware / Prayag

Supply and fixing in repair 15 mm bore fancy type 2 in 1 bib tap with angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fixing in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- Cat Part No LYR-38053 of Jaquar or Equivalent of ESS Croma/ Parko / Prayag.

Supply and fixing in repair 15 mm bore fancy type two way bib taps with wall flange long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Cat Part No SOL-6041of Jaquar or equivalent in ESS ESS CROMA / Parko / Prayag.

Supply and fixing in repair for 15 mm bore, fancy type, wall mixer, brass chromium plated with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed. Make:- Jaquar FLR-5281N or Equivalent of ESS ESS CROMA / Parko / Prayag

Supply and fixing in repairs 8 mm thick glass shelf having size of 60 cms x 20 cms having decorartive size stainless steel border at its edges fixed with chromium plated F-bracket with min of 8 cm long below WHB mirror all as specified and directed. Make :Cat no. AKP-357719 of Jaquar or equivalent in Parko / Prayag/ESS ESS croma.

Supply and fixing in repairs wall glass shelf white/chromium / nickel-plated having size of 80x20 cm (31 1/2x7 7/8 ") all as specified and directed.

Supply and fixing in repair 15 mm bore pillar taps table/wall mounted cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, swan neck with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts all as specified and directed. Make:- ESS ESS CROMA Cat Part No CON-349KNM/347KNM or Equivalent of Jaquar / Parko / Prayag.

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing or removing to store all as specified and directed

Taking up or down steel tubing 20 mm dia bore and connection including cleaning for refixing or removed to store all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings as IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal/ Tata / Swastik

S&F GI tubing 20 mm bore medium grade with all fittings as per IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n exc. 10cm girth all as specified and directed.

M&L 50mm PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) for pavement/hard-standing/concrete walls or any other type of repair with synthetic fibre reinforcement (Polypropene), laid in bays or as directed with and including steel formwork to sides of concrete & laid, spread, compacted and finished in a continuous operation including all as specified and directed for finishing surface of concrete toping even and fair (without using extra cement) all as specified and directed. Make of synthetic fiber : Recron 3S or equivalent Note: Rate quoted shall be inclusive of Synthetic fibre reinforcement @ 125gm per bag of cement.

Supply and fixing in repairs brass chromium plated, fancy type, 15 mm bore basin mixture or sink (central hole or wall mounted) with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag/ Parko/ Prayag.

Supply and fixing in repair Solid PVC door frame plain/wood grain printed of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

Supply and fixing in repairs factory made solid panel plain/wood grain printed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed.

Supply and fixing in repair 12mm thick, toughened glass clear or frosted for door shutters, partitions, shelves etc including fitting and fixtures such as glass handles SS studs, fittings for door pivots including SS locks all as specified and directed.

Material and labour for etching the symbols and sign on the toughned glass all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction all as specified and directed.

M&L for Stainless steel grade 316 decorative designer railings, staircase, grills, covers, sitting place, shed etc. (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequred) & SS plates cutting to desired shape, 1D Finish etc. complete with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with mircro concrete all as specified and directed by Engineer-in-Charge. Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.

Excavation in trenches not exc 1.5 meters wide and not exc1.5 meters deep for pipe line and getting out in soft/loose soil and levelling of bottom surface to required level all as specified and as directed.

Demolition of PCC in floor/road cutting exc 1.5 m depth including making good as per existing surface all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers nexc 25 cm in soil obtained from excavation all as specified and directed

Removing excavated material from site to a distance not exc 50 meters away and depositing where directed at a level not exc 1.5 metre above the starting point in soil all as specified and directed.

Supply and fix swimming pool spa brass deck jet fountain nozzle of size 25 mm dia all as specified and directed

Supply and fix in repair MS ERW pipe 25 mm bore of IS 1239 of 2000 with and including MS fittings all types duly welded for joints all as specified and directed

Supply and fix in repair MS ERW pipe 100 mm bore of IS 1239 of 2000 with and including MS fittings all types duly welded for joints all as specified and directed

Supply and fix in repair MS ERW pipe 150 mm bore of IS 1239 of 2000 with and including MS fittings all types duly welded for joints all as specified and directed.

Supply and filling sand gravel of size 5 mm to 40 mm filled in layers as per decreased size from bottom to upper level in filter media container all as specified and directed.

Supply and filling silica sand in filter media container all as specified and directed

Vandan Enterprises

SHREE JAGDISH FURNITURE CO.

Bidder Name

Mayur Enterprises

Vandan Enterprises

SHREE JAGDISH FURNITURE CO.