Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹81.6 L
EMD Value
₹1.6 L
Closing Date
8 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Definition of Similar Nature of work : Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Inter locking/ Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signaling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPAC's at Panel Interlocking stations/Electronic Interlocking stations OR Zonal Signaling /Telecom works Indoor or Outdoor works or both
14 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
1. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 569A (aditional vent way) at km 430/10-12 UP&DN line portion as precasted RCC box between TAA - KDM stations by Air pushing method. 2. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 569B (aditional vent way) at km 430/18- 20 UP&DN line portion as precasted RCC box between TAA - KDM stations by Air pushing method. 3. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 574A (aditional vent way) at km 433/2-4, UP&DN line portion as precasted RCC box between TAA - MABD stations by Air pushing method. 4. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 574B (aditional vent way) at km 433/6-8, UP&DN line portion as precasted RCC box between TAA - MABD stations by Air pushing method. 5. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 550A (aditional vent way) at km 418/6-4 UP&DN line portion as precasted RCC box between INK - KDM stations by Air pushing method. 6. Secunderabad Division- INK KDM Section - Signal cable shifting for proposed construction of new Bridge No. 548 (aditional vent way) at km 418/2-4 UP&DN line portion as precasted RCC box between INK - KDM stations by Air pushing method. 7. SIGNALLING CABLES SHIFTING IN VIEW OF PROPOSED CONSTRUCTION OF LHS NEW BRIDGE NO. 559A AT KM NO 421/33-35 IN LIEW OF CLOSED LEVEL CROSSING AT KDM STATION YARD AS PRECAST RCC BOX BY AIR PUSHING METHOD.
C_SG_36_581~SCR
C_SG_36_581
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹1.6 L
8 Jan 2026
17 Dec 2025
25 Dec 2025
76 items across 4 schedules · ₹81,62,388.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Thermo shrink jointing kitforjointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77-2012 Rev. 3 (Amd. ito Amd. 3) or latest. (TO BE INSPECTED RDSO) | Numbers | 16.00 | 3,715 | 59,440 |
| 2 | Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/T.2378 (TO BE INSPECTED RITES) | Numbers | 22.00 | 16,216 | 3,56,752 |
| 3 | Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half) (TO BE INSPECTED RITES) | Numbers | 6.00 | 8,083 | 48,498 |
| 4 | Supply of 'E'type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest.(TO BE INSPECTED RDSO) | Numbers | 44.00 | 1,051 | 46,244 |
| 5 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19). (TO BE INSPECTED CONSIGNEE) | Numbers | 90.00 | 195 | 17,550 |
| 6 | Supply of PVC insulated wire coils Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge. ITEM UNIT IS COIL(TO BE INSPECTED RDSO) | Numbers | 90.00 | 1,153 | 1,03,770 |
| 7 | Supply of PVC insulated wire coils, Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge. ITEM UNIT IS COIL(TO BE INSPECTED RDSO) | Numbers | 24.00 | 2,903 | 69,672 |
| 8 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil.(TO BE INSPECTED RDSO) | RMT | 1800.00 | 124 | 2,23,200 |
| 9 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge. (TO BE INSPECTED RDSO) | Metre | 200.00 | 391 | 78,200 |
| 10 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge.(TO BE INSPECTED RDSO) | Metre | 200.00 | 178 | 35,600 |
| 11 | Supply of non-deteriorating type of fuse holders 20A capacity and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) (TO BE INSPECTED RDSO) | Numbers | 180.00 | 220 | 39,600 |
| 12 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. (TO BE INSPECTED RDSO) | Numbers | 340.00 | 31 | 10,540 |
| 13 | SUPPLY OF Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest.(TO BE INSPECTED RDSO) | Numbers | 218.00 | 97 | 21,146 |
| 14 | SUPPLY OF Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. (TO BE INSPECTED RDSO) | Numbers | 680.00 | 406 | 2,76,080 |
| 15 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 -2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)"(TO BE INSPECTED CONSIGNEE) | Set | 550.00 | 703 | 3,86,650 |
| 16 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos. (TO BE INSPECTED CONSIGNEE) | Set | 29.00 | 64 | 1,856 |
| 17 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size: Hylam Sheet of size: 2400mm x1200mmx6mm. (TO BE INSPECTED CONSIGNEE) | Numbers | 12.00 | 7,124 | 85,488 |
| 18 | Small Sized Valve Regulated Lead Acid Batteries of 12V/7.0 Ah/ 12P70 with 2 Years Brand: EXIDE or similar (TO BE INSPECTED CONSIGNEE) | Numbers | 30.00 | 881.74 | 26,452.2 |
| 19 | "Supply of Digital multimeter Specifications: digital TRMS 5 Digit 60000 counts with following features Frequency range: 6Hz to 1MHz Frequency mv AC band width: 100KHz AC voltage rage: 1mV-1000V, +/- 0.5% DC voltage rage: 1uV-1000V, +/- 0.05% AC current rage: 1uA-10A, +/- 0.5% DC current rage: 1nA- 10A, +/- 0.2% Capacitance range: 1pF-10000uF Datalogging: 32000 Readings Dual display: Available Other features: Temparature messurement, Diode, continuty, Duly cycle measurement, self battery voltage measurement, Low pass filter, Min, Max and Average value recording, Back light, Bargraph, Protective rubber holster. Model no: Rishabh 6016 or Similar"(TO BE INSPECTED CONSIGNEE) | Numbers | 10.00 | 15,157 | 1,51,570 |
| 20 | Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A. (TO BE INSPECTED RDSO) | Numbers | 1.00 | 19,470 | 19,470 |
| 21 | Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest. Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A. (TO BE INSPECTED RDSO) | Numbers | 1.00 | 25,960 | 25,960 |
| 22 | Supply of Double key lock for relay room.(TO BE INSPECTED CONSIGNEE) | Numbers | 14.00 | 1,233 | 17,262 |
| 23 | Aluminium lugs 25 sq.mm of reputed make. (TO BE INSPECTED CONSIGNEE) | Numbers | 1200.00 | 25 | 30,000 |
| 24 | Copper lugs 10sq.mm of reputed make. (TO BE INSPECTED CONSIGNEE) | Numbers | 3000.00 | 12 | 36,000 |
| 25 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make. (TO BE INSPECTED CONSIGNEE) | Numbers | 12000.00 | 3 | 36,000 |
| 26 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make. (TO BE INSPECTED CONSIGNEE) | Numbers | 3000.00 | 6 | 18,000 |
| 27 | Deflector Plates for Axle Counter (1Set =02 Nos) (TO BE INSPECTED CONSIGNEE) | Set | 10.00 | 5,555 | 55,550 |
| 28 | Printing, binding and supply of Registers with latest proforma as given by engineer in-charge. Each register shall be of 100 pages. ITEM UNIT IS PER REGR (TO BE INSPECTED CONSIGNEE) | Numbers | 20.00 | 358 | 7,160 |
| 29 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S IR) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No." "14. Hacksaw frame with blade 6"", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 3.00 | 46,332 | 1,38,996 |
| Schedule total | ₹24,22,706.2 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Correctionslips.pdf
ATTACHMENT
GCC_April-2022_.pdf
ATTACHMENT
Annexuresfortender.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
TenderDocument581_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .