Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
3 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Civil Works Pertaining to Proposed Extension of Existing LCA MWF MK 2 Hangar at ARDC, HAL DC.
8766
TENDER NOTICE/NCP/16/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1 L
3 Sept 2024
18 Jul 2024
18 Jul 2024
3 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means is foundation trenches or drains (not exceeding 1.5m in depth or 10sqm or plan), including dressing of sides and ramming of bottoms,lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50m, etc., all complete as ditected by Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means is foundation trenches or drains exceeding 1.5m in depth or 10sqm or plan), including dressing of sides and ramming of bottoms, lift upto 3.0m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m, etc., all complete as ditected by Engineer-in-Charge.
Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundations in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift, etc., all complete as ditected by Engineer-in-Charge.
Excavating, Supplying, stacking and filling local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceding 20cm in foundation trenches, plinth, sides of foundation, etc., complete for all lift, etc., all complete as ditected by Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), etc., all complete as ditected by Engineer-in-Charge.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;using carse aggregate and fine aggregate derived from natural sources,portland recommanded proportions as per IS:9103 for accelerate / retard of concrete to improve durabality and workabality without impairing strength: including pumping of concrete to the site laying,curing,cariage for all leads;but excluding the cost of centering,shuttering,finishing reinforcement, etc., all complete as ditected by Engineer-in-Charge for the following grade of concrete. All work upto plinth level concrete of M25 grade with minimum cement content 330kg/cum
WBM :Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity/3 wheeled road roller/manual consolidation (based on site conditions) after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re- olling the sub grade and disposal of surplus earthwith lead upto 50 metres, etc., all complete as ditected by Engineer-in-Charge.
WBM : Compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).Supplying ,stacking, laying and spreading of graded stone aggregate at site of size range 63 mm to 45 mm.Laying water bound macadam with specified stone aggregate stone screening and binding material like good earth (supplied by contractor) including screening, sorting, spreading to template and consolidation with power roller of 8 to 10 tonne capacity etc/3 wheeled road roller/manual consolidation (based on site conditions), etc., all complete as ditected by Engineer-in-Charge.
Supplying and stacking of stone aggregate at site, of the size range of 63 mm to 45 mm including carriage, etc., all complete as ditected by Engineer-in-Charge.
Supplying and stacking of good earth including roaylty and the required carriage, etc., all complete as ditected by Engineer-in-Charge.
Providing and laying in position 1:1.5:3 of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), etc., all complete as ditected by Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work using members like MS members made up of elements like ISMB,ISMC, ISA, MS Flats, ISNT, MS Plates, holding down bolts, nuts, washer, etc , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as ditected by Engineer-in-Charge.
Steel reinforcement for R.C.C work including straightening, cutting,bending,placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more, etc., all complete as ditected by Engineer-in-Charge.
Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: Foundations, footings, bases of columns etc. for mass concrete, etc., all complete as ditected by Engineer-in-Charge.
Foundations, footings, bases of columns etc. for mass concrete.
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Plastering exterior walls 15 mm cement plaster on the rough side of single or half brick wall in CM 1:6 at all levels etc complete with necessary preparation, etc., all complete as ditected by Engineer-in-Charge.
Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by engineer in charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thicknes with total coating thickness of 0.05mm) with zink coating 120grms /sqm as per IS:277,in 240mpa steel grade ,5-7micron apoxy primer on both side of the sheet and polister top coat 15-18 microns. Sheets should have protective guard film of 25micron minimum to avoid scratches during transportation and should be supply in single length upto 12meter or as desired by engineer-in-charge.The sheet shalllbe fixed using self drilling /selftapping screws of size (5.5*55mm) EPDM seal,complete upto any peach in horizontal bar verticala are curved surfaces, including the cost of purlins, rafters and trusess and including cutting to size nd shape wherever required, etc., all complete as ditected by Engineer-in-Charge.
Providing and fixing M.S. round holding down bolts with nuts and washer plates, etc., all complete as ditected by Engineer-in-Charge.
Demolition of Reinforced Concrete in floors and pavings not exceeding 15 cm thickness (below or above ground level), etc., all complete as ditected by Engineer-in-Charge.
External Painting (New work) Finishing walls with Premier Acrylic Smooth Exterior Paint with Silicone additives of require shade by providing Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat 1.43 ltr/ 10 sqm. over and including base coat or equivalent applied @ 0.9litre/sqm with necessary prepration of the surface, etc., all complete as ditected by Engineer-in-Charge.
Painting with two coats of synthetic enamel paint for steel surfaces of approved shade and manufacture on a coat of primer( paid along with structural steel) including preparation of surface by wire brushing/sand papering the loosen paint and wiping the surface clean with mineral solvents to remove grease and hand marks, etc., prepare the surface for smooth & even using sand paper, metal paste for steel surface before painting the first coat. Top coat of desired shade shall be applied after undercoat is thoroughly dried and rubbed with fine grade of abrasive paper to ensure smooth and even surface, free from brush marks, etc., all complete as ditected by Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 2 coats of paint and one coat of primer With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works as a part of old work which includes previously painted structural steel members, etc., all complete as ditected by Engineer-in-Charge.
Fabrication,erection, straightening using existing available steel including transporation, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as ditected by Engineer-in-Charge.
Treatment of soil under existing floors using chemical emulsion @one litre per hole,300mm apart including drilling 12mm diameter holes and plugging with cement mortor 1:2(1cement : 2coarse sand) to match the existing floor, etc., all complete as ditected by Engineer-in-Charge.
Providing and fixing aluminium work for doors, windows ( 3 track/2 track windows as instructed by EIC), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing: aluminium shutters of doors, windows ( 3 track/2 track windows as instructed by EIC) & ventilators including providing and fixing hinges/ pivots/handles/locks and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15), etc., all complete as ditected by Engineer-in-Charge.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm), etc., all complete as ditected by Engineer-in-Charge.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth, etc., all complete as ditected by Engineer-in-Charge.
Rupees Forty Two Lakh Forty One Thousand Three Hundred Fifty Five and Thirty One Paise Only
Approximate Amount Put to Tender
Rupees Seven Lakh Sixty Three Thousand Four Hundred Forty Three and Ninety Five Paise Only
Rupees Fifty Lakh Four Thousand Seven Hundred Ninety Nine and Twenty Six Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN16.pdf
TENDER_DOCUMENT • 2.59 MB
159AChecklist.pdf
TENDER_DOCUMENT • 0.17 MB
159APQF.xlsm
TENDER_DOCUMENT • 0.03 MB
159ATenderDrawing.pdf
TENDER_DOCUMENT • 0.12 MB
159AUndertaking.pdf
TENDER_DOCUMENT • 0.55 MB
159APQ.pdf
TENDER_DOCUMENT • 0.21 MB
159APBF.xlsm
TENDER_DOCUMENT • 0.04 MB
159ATB.pdf
TENDER_DOCUMENT • 2.56 MB
159APB.pdf
TENDER_DOCUMENT • 0.32 MB
159AECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .