Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹13.7 L+₹20,495.89 (1.52%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹13.8 L+₹34,262.10 (2.54%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹15.4 L+₹2.0 L (14.7%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹16.3 L+₹2.8 L (20.8%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
Tender Value
₹19.1 L
EMD Value
₹38,200
Closing Date
17 Feb 2024, 6:00 pmClosed
GE PROJECT PANAGARH
GE PROJECT PANAGARH PO PANAGARH DIST BURDWAN PIN 713420
PROVN OF COVERED CAR PARKING SHED WITH HARD STANDING FOR APPROX 06 VEHICLES NEAR ADMIN AREA AND PROVISION OF APPROACH PATH FOR PROPOSED CAR SHED UNDER GE (P) PANAGARH
2024_MES_638482_2
8190/E8
Open Tender
Civil Works
Item Rate
180 days
GE PROJECT PANAGARH
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE PROJECT PANAGARH
₹38,200
Yes
13 Mar 2024
9 Feb 2024
19 Feb 2024
9 Feb 2024
17 Feb 2024
10 Feb 2024
Amount
Excavation over area n exc 1.5 m deep & getting out soft/ loose soil.
Material & Labour for mixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting with vibratory roller to get min CBR value 8% and Dry density 97 % placed at required camber and gradient complete as directed:- Note:- Test cerificate of FLY ash is mandatory, before execution and for claiming payment. The unit.rate quotd is deemed to include this aspect.
M&L for 100 mm PCC(1:2:4) type B1 using 20 mm graded aggregate used as in Sub base Floor, etc complete.
M&L for 100 mm PCC(1:4:8) type D2 using 40 mm graded aggregate used as in Sub base Floor complete
Excavation in Post holes (or similar holes) each n exc 0.5 cu.m., getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , etc complte.
M&L for PCC (1:2:4) type B1 (using 20 mm graded aggregate ) used as mass concrete and similar work.
M&L for Hard core of broken stone or boulders of guage exc 63mm but n ec 100mm , deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete.
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete as specified and directed. Make STP / Tikitar / Choksy Chemicals.
M&l for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to grade Fe- 410,W( gde E-250) quality A, complete as specified and directed. Make: Tata / Jindal / SAIL
S&F Plates grade Fe- 410,W( gde E-250) quality A, , (plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes, without any attachment complete.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make:- M/S Tata Blue scope steel ltd. (colorbond steel) / equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.
M&L for Preparing Newly steel Surfaces and applying 2 coats of synthetic enamel paint over a coat of primer, etc complete all as specified and as directed. Make.:- Asian /Berger / Jenson & Nicholson.( All first quality)
Removing of excavated soil, material exc 250mtr but n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point.
M&L for wind ties forr roofing, securing with bolts, including drilling holes of size as required, etc complete.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make:- M/S Tata Blue scope steel ltd. (colorbond steel) / equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.
M&L for PCC (1:2:4) type B1 (using 20.00mm graded aggregate ) as in coping and similar works, including use and waste of formwork, etc complete.
M&L Sand cushioning in filling under floors or in foundations including watering and consolidation complete.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigments. Makes:- Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope / Mehtab Tiles / Nitco / Multiwyn.
S&F Reinforced concrete pipes ,class NP2,laid and jointed complete with collors 600 mm bore. Makes:- Indian Hume pipe / any make as approved by GE conforming to IS.
M&L PCC 1:4:8 type D2(using 40mm graded stone agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, bore of pipe 600 mm
Removal of excavated soil n. exc 50 m and deposited where directed at a level n. exc. 1.5 m above the starting point.
Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.
M/S SENAPATI ENTERPRISE
SAIBABA ENTERPRISE
UNITED BUILDERS
M/S JOYGURU ENTERPRISE
M/S TRIVENI BUILDERS
subash chander bahl
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
Goswami Enterprise
M/S N B SEN CONSTURCTION
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .