GE 861 EWS-07/2022-2023

Amount

Dismantling plain or corrugated steel sheeting , any gauge and thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets etc, complete all as specified and directed.

Dismantling of timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding (eaves board) to wall fixed with self tapping screws as specified and directed.

25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crused stone aggregate) as in floors to recieve floor finishes, complete all as specified.

40 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crused stone aggregate) as in flooring finished even and smooth without using extra cement, complete all as specified.

75mm thick PCC 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in sub-floor, sub-base, floor and pavings, etc, complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork, complete all as specified and directed.

Chequered coloured cement concrete tiles, glossy finish of size 200 x 200 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed.

2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and directed.

2nd class softwood fillets of sectional area exc 3 sqcm but n exc 6 sqcm bull nosed, splayed, chamfered or rounded on one edge or face, secured with nail or brads, complete all as specified and directed.

25mm outer diametre 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV Stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

Steel water tubing, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F in repair 15mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests including cast iron 'P' or 'S' trap, including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc., jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded crushed stone aggregate, complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and fixed in pipe etc., complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball complete all as specified and directed.

S&F in repair vitreous china urinals, bowl type 465x355x265 mm white (back to cornor wall type), providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with flush pipe, grating and union for discharge pipe and 60mm long brass screws, pointing around urinal back in cement and fixing 5 Ltr capacity automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including 32mm waste fitting, complete all as specified and directed.

S&F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, including 32mm waste fittings, chromium plated with long screwed shanks & fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in repair 15mm bore bib tap, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair 15mm bore pillar tap,fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.

3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-36 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-36 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per serial item No 36 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

S & F in repair switch piano flush button types 6 Amp, single pole, one way complete all as specified and directed.

S & F in repair switch piano flush button types 16 Amp, single pole, one way, complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 6 Amp flush type, universal, complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 6 Amp flush type, universal with boxes, complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal with boxes, complete all as specified and directed.

S & F in repair socket outlet, 3 pin, 6 Amps flush type, complete all as specified and directed.

S & F in repair socket out let,2 in 1, 3 pin, 6 and 16 Amp, flush type, complete all as specified and directed.

S & F in repair modular one way switch 6 Amp 240 volts suitable for 1 module, complete all as specified and directed.

S & F in repair modular one way switch 16A, 1 module single pole, 230 volts complete all as specified & directed.

S & F in repair modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed.

S & F in repair modular socket outlet, 6A/16A-2/3 pin combined 2 module, 230 volts complete all as specified & directed.

S & F in repair modular metal flush box, 3 module, complete all as specified and directed.

S & F in repair modular metal flush box, 4 module, complete all as specified and directed.

S & F in repair modular metal flush box, 6 module, complete all as specified and directed.

S & F in repair modular metal flush box, 8 module, complete all as specified and directed.

S & F in repair modular white cover plate with frame, 3 module, complete all as specified and directed.

S & F in repair modular white cover plate with frame, 4 module, complete all as specified and directed.

S & F in repair modular white cover plate with frame, 6 module, complete all as specified and directed.

S & F in repair modular white cover plate with frame, 8 module, complete all as specified and directed.

S & F in repair stepped type electronic fan regulator flush type, AC 230 volts, duly ISI marked including connector on the existing sheet etc. as reqd., complete all as specified and directed.

S & F in repair lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed.

S & F in repair ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

Supply, installation, testing and commissioning of decorative ultra slim linear LED in replacement of 18 Watt , 4' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube including taking out old, all as specified and directed.

Supply, installation, testing and commissioning of decorative ultra slim linear LED in replacement of 9 Watt , 2' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube including taking out old, all as specified and directed.

S & F in repair LED lamp 20 W, complete all as specified and directed.

S & F in repair LED lamp 9 W, complete all as specified and directed.

S & F in repair LED bulk head fitting 9/10 W including LED light driver holder connecting up with three core flexible copper conducter cable of suitable size and all accessories for fixing on wall, complete all as specified and directed.

Supply & fixing in repair MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections, complete all as specified & directed.

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, "B" series capacity 20 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, "B" series capacity 32 Amps to 40 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, "B" series capacity 63 Amps, 10kA and making connections complete all as specified & directed.

Supply and fixing in repair MCB, TPN, AC, 240 volts "B" series capacity of 63 Amps, 25kA and making connections, complete all as specified & directed.

Supply and fixing in repair cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 1.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified & directed.

Supply and fixing in repair cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 2.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified & directed.

Supply and fixing in repair cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 6.0 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted.

Supply and laying in repair service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 10 sqmm 2 Core nominal cross section complete all as specified and directed.

Supply and laying in repair service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 16 sqmm 2 Core nominal cross section complete all as specified and directed.

Supply and laying in repair PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core, complete all as specified and directed.

S & F in repair bed switch 6 Amp, single pole, one way complete all as specified and directed.

Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed.

Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed.

Supply and fixing in repair casing caping, 20mm, complete all as specified and directed.

Supply and fixing in repair casing caping, 25mm, complete all as specified and directed.

Supply and fixing in repair flexible pipe, 25mm, complete all as specified and directed.

Supply and fixing in repair flexible pipe, 20mm, complete all as specified and directed.

S & F in repair 35 Watt LED street light fitting 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

S&F in repair connecting and testing changeover switch four pole 415 volts on load of rating 100 Amp and including sheet steel enclosures complete including taking out to old u/s switch, complete all as specified and as directed.

S&F in repair connecting and testing changeover switch four pole 415 volts on load of rating 63 Amp and including sheet steel enclosures complete including taking out to old u/s switch, complete all as specified and as directed.

Taking down old exhaust fan and fixing only exhaust fan 230mm to 250mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed.

Taking down old geyser and fixing only water heater vertical type, stationary storage type of 25 ltr capacity 240 volts, including fixing arrangement nut bolts, washer/fasteners and finishing work etc, complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc, all as specified and directed. Note for srl item No 90 & 91 :- Items will be issued under Sch 'B' free for fixing.

M/S AK ENTERPRISES

M/S A.N CONSTRUCTIONs

M/S GASSI CONSTRUCTION AND CO