Construction of 2x40 MVA 132KV S/S Jhansi-II on turnkey basis

Tender Specification no. ESD-678

Name of Bidder:

SCHEDULE OF QUANTITIES & PRICES FOR SUPPLY OF EQUIPMENTS/MATERIALS AND LIGHT LUMINAIRES FOR 2X40MVA, 132/33kV S/s JHANSI-II (SAS based on Double Main and Transfer Bus Scheme)

S. N. Item/ Equipments along with all accessories as per specifications Unit Tendered Qty. Unit FOR (Ex-Works, Packaging, Forwarding, Freight & Insurance Charges) Rate without GST (Rs.) Applicable GST Amount @ 18% (Rs.) Unit FOR (Ex-Works, Packaging, Forwarding, Freight & Insurance Charges) Rate with GST (Rs.) (5+6) Total FOR Destination Price with GST (4x7) (Rs.)

1.1 POWER TRANSFORMER,40MVA,145/36KV Nos 2 To be provided by UPPTCL

1.2 STATION TRANSFORMER,250KVA,36/0.420KV No 2

2 Circuit Breaker

2.1 SF6 CB,145KV,3150A,40KA Nos 6

2.2 VCB,36KV,2000A,31.5KA Nos 13

3 Current Transformer (CT)

3.3 CONNECTOR,CT,145KV,TWIN PANTHER Nos 36

3.4 JUNCTION BOX,CT,145KV Nos 6

3.5 CT,POLY,36KV,800-400-200/1A,3C,0.2S (with Terminal Connector) Nos 6

3.6 CT,36KV,400-200/1A,2C,0.2S (with Terminal Connector) Nos 39

3.7 JUNCTION BOX,CT,36KV Nos 15

4 Potential Transformer (PT)

4.1 PT,145KV,50VA Nos 12

4.2 CONNECTOR,CVT/PT,145KV,PANTHER Nos 12

4.3 JUNCTION BOX,CVT/PT,145KV Nos 4

4.4 PT,36KV,50VA (with Terminal Connector) Nos 6

4.5 JUNCTION BOX,CVT/PT,36KV Nos 2

5.1 ISOLATOR,145KV,CBR,1250A,MOTOR,W/1ES (LINE ISOLATOR) Nos 2

5.2 ISOLATOR,145KV,CBR,1250A,MOTOR,W/O ES (BUS ISOLATOR) Nos 10

5.3 ISOLATOR,TANDEM,145KV,HCB,1250A,MOTOR (TANDEM ISOLATOR) Nos 9

5.4 ISOLATOR,36KV,1250A,W E/S (LINE ISOLATOR WITH POST INSULATOR) Nos 10

5.5 ISOLATOR,36KV,1250A,W/O E/S (BUS ISOLATOR WITH POST INSULATOR) Nos 25

5.6 FUSE,DROP OUT (WITH POST INSULATOR) No 2

6 Post Insulator

6.1 BUS POST INSULATOR,145KV Nos 160

6.2 POST INSULATOR,36KV Nos 30

7 Surge Arrester

7.1 SURGE ARRESTOR,POLYMER TYPE,120KV Nos 12

7.2 SURGE ARRESTOR,POLYMER TYPE,30KV Nos 12

8 CRP & SAS (as per Technical Specification of SAS)

8.1 RELAY PANEL,UNDER FREQUENCY,145KV No. 1

8.2 C&R PANEL,TRANSFORMER,145KV Nos 2

8.3 C&R PANEL,SIMPLEX FEEDER,145KV Nos 2

8.4 C&R PANEL,BUS COUPLER,SAS,145KV No 1

8.5 PANEL,TRANSFER BUS COUPLER,145KV No 1

8.6 C&R PANEL,TRIPLE FEEDER,36KV Nos 4

8.7 SAS (Complete Set) LS 1

8.8 OPTICAL FIBER CABLE Lot 1

9 Battery & Battery Charger

9.1 BATTERY SET,LEAD ACID,110V,200AH Set 2

9.2 BATTERY CHARGER,110V,200AH No 2

10.1 DISTRIBUTION BOARD,110V,DC No 2

10.2 DISTRIBUTION BOARD,415V,AC,SWITCH YARD No 1

10.3 DISTRIBUTION BOARD,415V,AC,LIGHTING No 1

10.4 BAY MARSHALLING KIOSK,SWITCH YARD Nos 2

11 Capacitor Bank with all Accessories

11.1 2x5 MVAR, 33kV Capacitor Bank Unit Set 1

Simplex Type Control & Relay Panel for 33kV Capacitor Bank

VCB,36KV,2000A,31.5KA

3-Phase Reactor

CT,36KV,400-200/1A,2C,0.2S (with Terminal Connector)

JUNCTION BOX,CT,36KV

ISOLATOR,36KV,1250A,W E/S (LINE ISOLATOR WITH POST INSULATOR)

ISOLATOR,36KV,1250A,W/O E/S (BUS ISOLATOR WITH POST INSULATOR)

36kV NCT Ratio 5/1A

Terminal Connector for 36kV NCT

Junction Box for 36kV NCT

PT,3 PHASE,36KV

Terminal Connector for 3-Phase PT

12.1 1.1 KV PVC FRLS Unarmoured Copper Control Cable

12.1.1 CBL,CTRL,UNARM,PVC INS,CU,2CX2.5SQMM KM 15

12.1.2 CBL,CTRL,UNARM,PVC INS,CU,4CX2.5SQMM KM 35

12.1.3 CBL,CTRL,UNARM,PVC INS,CU,6CX2.5SQMM KM 25

12.1.4 CBL,CTRL,UNARM,PVC INS,CU,10CX2.5SQMM KM 10

12.2 1.1 KV PVC FRLS Unarmoured Alluminium Power Cable

12.2.1 CBL,POWER,UNARM,3.5CX400SQMM,1.1KV,AL KM 0.0

12.2.2 CBL,POWER,UNARM,3.5CX95SQMM,1.1KV,AL KM 1

12.2.3 CBL,POWER,UNARM,3.5CX50SQMM,1.1KV,AL KM 1

13 Structure & Earthing Material

13.1 STRUCTURE,LATTICE TYPE (Galvanised Main & Auxiliary Structures with MS angles, channels, plates, nuts, bolts, step bolts, U bolts, spring washers, etc. and any other required materials) MT 140

13.2 ROUND,MS,40MM RM 6500

13.3 ELECTRODE,MS,40MM,3M Nos 300

13.4 FLAT,MS,75X10MM RM 2500

13.5 FLAT,MS,50X6MM RM 4000

13.6 FLAT,MS,25X6MM RM 2000

14 Energy Meter

14.1 ENERGY METER,3-PHASE,4-WIRE,ABT,0.2S Nos 4

14.2 METERING CUBICLE No 1

14.3 SWITCH,NETWORK,16 PORT,14CU+2FO No 1

14.4 DATA CONCENTRATOR,DCU/COMM GATEWAY No 1

14.5 CABLE,LAN KM 0.2

14.6 CONDUIT PIPE,PVC,FLXBLE,50MM KM 0.2

14.7 CABLE,FO,ARMRD,6CORE,W/HDPE PIPE,32MM KM 0.5

14.9 LIU,6 PORT,W/ACCS Nos 2

14.1 SWITCH,NETWORK,8 PORT,6CU+2FO No 1

15.1 CONDUCTOR,ACSR MOOSE KM 4

15.2 CONDUCTOR,ACSR PANTHER KM 2

16 INSULATOR,PORCELAIN,ANTIFOG,70KN Nos 2000

17 Hardware Fittings

17.1 Single Tension Fittings Suitable for

17.1.1 FITT,BLTD,SINGLE TENSION,MOOSE Nos 150

17.1.2 FITT,BLTD,SINGLE TENSION,PANTHER Nos 60

17.2 Single Suspension Fittings Suitable for

17.2.1 FITT,BLTD,SINGLE SUSPENSION,MOOSE Nos 20

17.2.2 FITT,BLTD,SINGLE SUSPENSION,PANTHER Nos 5

17.3 PG clamps suitable for -

17.3.1 PG CLAMP,MOOSE/MOOSE Nos 600

17.3.2 PG CLAMP,MOOSE/PANTHER Nos 300

17.3.3 PG CLAMP,PANTHER/PANTHER Nos 400

17.4 Bus Post Clamps suitable for-

17.4.1 CONNECTOR,BPI,PANTHER Nos 50

17.4.2 CONNECTOR,BPI,TWIN PANTHER Nos 40

17.4.3 CONNECTOR,BPI,MOOSE Nos 20

18 Fire Fighting equipments

18.1 FIRE EXT,MECH FOAM,50LTR Nos 12

18.2 Fire Extinguisher carbon dioxide (CO2) as per latest IS

18.2.1 FIRE EXT,CO2,IS 2878/1986,22.5KGS No 9

18.2.2 FIRE EXT,CO2,IS 2878/1986,9KGS Nos 6

18.2.3 FIRE EXT,CO2,IS 2878/1986,4.5KGS Nos 12

18.3 SAND BUCKET Nos 70

18.4 STAND FOR SAND BUCKET Nos 6

18.5 ALARM,FIRE PROTECTION & DETECTION SYSTEM (SMOKE & HEAT DETECTION) LS 1

19 DG SET, 100 KVA,SILENT conforming to latest MoEFCC/CPCB guidelines Nos 1

20 GI perforated trays of various sizes for all cable trenches in switchyard, control room

20.1 CBL TRAY,PERFORATED,225MM Mtr 100

20.2 CBL TRAY,PERFORATED,75MM Mtr 250

21 Lighting and Luminaires

21.1 Supply of Complete fitting of Street Light Luminairs with LED Lamp 110 to 130 Watt, with all accessories (make Philips/CGL/Bajaj) Confirming to IP:65 Nos. 42

21.2 Supply of Complete fitting of Post Top Lantern with all accessories with LED Lamp 40 to 45 Watt (make Philips/CGL/Bajaj) Confirming to IP:65 Nos. 10

21.3 Supply of 15W LED Lamp (make Philips/CGL/Bajaj) Nos. 15

21.4 Supply of Complete fittings of 18/20 Watt LED Tube Light (make Philips/CGL/Bajaj) Nos. 50

22 TESTING EQUIPMENTS (UPPTCL approved-make)

22.1 Thermo vision camera (640x480 px) No 1

22.2 5kV Digital Insution Tester with Voltage control (Specially provision for measurment of PI) No 1

22.3 Digital Multimeter (4 1/2 Digit) No 1

22.4 Digital Clamp On Meter (0-300-600 A) No 1

22.5 Earthing/Discharge Rod having, 25 sq. mm. copper cable Nos 6

23 Fiber Optic Terminal Equipment (FOTE) SDH (STM-16)

23.1 Base equipment suitable for 04 directions in subrack fully equipped with all necessary common cards, power supply cards, other hardware & accessories including 10 Nos. optical patch cords of lengths as per site requirements, DDF etc. with redundant CPU. No 1

23.2 Short Haul, STM-16, 1310nm SFP Transceiver - S16.1 Nos 2

23.3 Long Haul, STM-16, 1310nm SFP Transceiver- L-16.1 Nos 4

23.4 Long Haul, STM-16, 1550nm SFP Transceiver- L-16.2 Nos 2

23.5 E1 Interfaces (120 Ohm) ( 32 Interfaces with 2 Cards) No 1

23.6 L2 Ethernet Interfaces 10/100 Base T (16 Interfaces with minimum 2 cards) No 1

23.7 Equipment cabinet for SDH and DTPC 2200mm (h) including 100mm base, w x d should be suitable for 19" or 23" Rack (Alongwith 110V to 48V DC-DC Converter) No 1

23.8 MDF (200 Pairs), mounted in cabinet No 1

23.9 04 command standalone Digital Tele-Protection Cuupler (DTPC) fully equipped with necessary common cards power Supply Cards other Hardware accessories Connectors Cables Subtrack with E I path cords set of 04 etc. No 4

0.0 SECURITY SYSTEM,CCTV LS 1

Total (INR excluding GST)

Seal of Company

Full Signature ………………………………

Designation ………………………………

Tender Specification no. ESD-678

Name of Bidder:

HANDLING, ERECTION, TESTING & COMMISSIONING CHARGES FOR 2X40MVA, 132/33kV S/s JHANSI-II (SAS based on Double Main and Transfer Bus Scheme)

Sl. No. Item/ Equipments along with all accessories as per specifications Unit Tendered Qty Unit handling, erection, testing & commissioning charges without GST (Rs.) Applicable GST Amount @ 18% (Rs.) Unit handling, erection, testing & commissioning charges with GST (Rs.) (5+6) Total handling, erection, testing & commissioning charges with GST (4x7) (Rs.)

1.1 EREC 40 MVA,132/33KV TRF Nos 2

1.2 EREC 250KVA,33/0.4KV TRF No 2

2 Circuit Breaker

2.1 EREC OF 145KV CB Nos 6

2.2 EREC OF 36KV VCB Nos 13

3 Current Transformer (CT)

3.1 EREC OF 145KV CT Nos 18

3.2 EREC OF JB FOR 145KV CT Nos 6

3.3 EREC OF 36KV CT Nos 45

3.4 EREC OF JB FOR 36KV CT Nos 15

4 Potential Transformer (PT)

4.1 EREC OF 145KV PT Nos 12

4.2 EREC OF JB FOR 145KV PT Nos 4

4.3 EREC OF 36KV PT Nos 6

4.5 EREC OF JB FOR 36KV PT Nos 2

5.1 EREC OF 145KV LINE ISO W/1ES Nos 2

5.2 EREC OF 145KV BUS ISO Nos 10

5.3 EREC OF 145KV TANDEM ISO W/1ES Nos 9

5.4 EREC OF 36KV LINE ISO Nos 10

5.5 EREC OF 36KV BUS ISO Nos 25

5.6 EREC OF 36KV DROP OUT FUSE SET No 2

6 Post Insulator

6.1 EREC OF 145KV POST INSULATOR Nos 160

6.2 EREC OF 36KV POST INSULATOR Nos 30

7 Surge Arrester

7.1 EREC OF 120KV LIGHTNING ARRESTER / SURGE ARRESTOR Nos 12

7.2 EREC OF 30KV LIGHTNING ARRESTER / SURGE ARRESTOR Nos 12

8 CRP & SAS (as per Technical Specification of SAS)

8.1 EREC OF UNDER FREQUENCY RELAY PANEL Nos 1

8.2 EREC OF RELAY/CONTROL PANEL PWR TRF Nos 2

8.3 EREC OF RELAY/CONTROL PANEL FOR FDR Nos 2

8.4 EREC OF RELAY/CONTROL PANEL BUS COUPLER No 1

8.5 EREC OF RELAY/CONTROL PANEL TBC No 1

8.6 EREC OF 33KV TRIPLE FDR CRP Nos 4

8.7 EREC OF SAS PANEL LS 1

8.8 EREC OF OPTICAL FIBRE FOR SAS Lot 1

9 Battery & Battery Charger

9.1 EREC OF 110V BATTERY SET Set 2

9.2 EREC OF 110V BATTERY CHARGER No 2

10.1 EREC OF 110V DCDB No 2

10.2 EREC OF 440/415V ACDB No 1

10.3 EREC OF LIGHTING DIST BOARD No 1

10.4 EREC OF BAY MARSHALLING KIOSK Nos 2

11 Capacitor Bank & its Accessories

11.1 Erection of 2x5 MVAR, 33kV Capacitor Bank alongwith Vacuum Circuit Breaker, 3-phase reactor, CT, NCT, PT, Isolators, Control & Relay panel and all other required items (COMPLETE IN ALL RESPECT) Set 1

12.1 1.1 KV PVC FRLS Unarmoured Copper Control Cable

12.1.1 LAYING 2CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT) KM 15

12.1.2 LAYING 4CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT) KM 35

12.1.3 LAYING 6CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT) KM 25

12.1.4 LAYING 10CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT) KM 10

12.2 1.1 KV PVC FRLS Unarmoured Alluminium Power Cable

12.2.1 LAYING 3.5 core * 400 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT) KM 0.0

12.2.2 LAYING 3.5 core * 95 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT) KM 1

12.2.3 LAYING 3.5 core * 50 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT) KM 1

13 Structure & Earthing Material

13.1 EREC,STRUCTURES, MAIN/AUX, INCL ACCS: with MS angles, channels, plates, nuts, bolts, step bolts, U bolts, spring washers, etc. and any other required material MT 140

13.2 LAYG MS BAR 700MM-40MM DIA 40mm for Main Earthmat RM 6500

13.3 LAY,ELECTRODE,MS ROUND,40MMX3M,BLW GND 40mm Dia MS Electrode (3 M Long) Nos 300

13.4 FRESH EARTHG,W/FLAT,75X10MM RM 2500

13.5 FRESH EARTHG,W/FLAT,50X6MM RM 4000

13.6 FRESH EARTHG,W/FLAT,25X6MM RM 2000

14 Energy Meter

14.1 EREC OF ABT ENERGY METER Nos 4

14.2 EREC OF ABT ENERGY METERING PANEL with one main & one check rack No 1

14.3 INSTALLATION,DCU/GATEWAY/ETC including installation of Network Switch-16 Port, (14Cu+2 FO with FO Communication module (industrial frade), LIU (Light Interfacing Unit) with patchcord & accessories, Network Switch-08 Port, Data Concentrator (DCU)/ Communication Gateway (IG), laying of Lan Cable, PVC Conduit Pipe-3/4, OFC Cable Armoured (6P), HDPE Conduit Pipe 32mm Lot 1

15 Stringing of Conductors

15.1 Stringing of Bus bars comprising of Conductors Tension & Suspension stings complete with anti fog type disc insulators, tension & suspension clamps, PG clamps, Bus post clamps, connectors, earth wires and all other required material for KM 2.5

15.2 132 KV Main Bus I & II Lot 1

15.3 132 KV Transfer Bus Lot 1

15.4 132 KV Jack Bus for-

15.5 Feeder Lot 1

15.6 Power Transformer Lot 1

15.7 Bus Coupler Lot 1

15.8 33 KV Main Bus Lot 1

15.9 33 KV Auxilliary Bus Lot 1

15.1 JUMPERING TRF & ASSOC. EQUIP. Baywise interconnection of equipments with specified conductors ( jumpering ) for complete substation including but not limited to: 1. 40/63 MVA Transformer bay including 132 KV &33KV side bays 2. 132 KV Feeder Bay 3. 132 KV Bus Coupler Bay 4. 132 KV Transfer Bus Coupler Bay 5. 33 KV Feeder Bay 6. 33 KV Bus Coupler Bay 7. 33 KV Bay for station Transformer (COMPLETE IN ALL RESPECT) LS 1

16 Fire Fighting equipments

16.1 EREC OF FIRE FIGHTING SYSTEM (COMPLETE IN ALL RESPECT) JOB 1

17.1 EREC OF DG SET conforming to latest MoEFCC/CPCB guidelines No 1

18.1 INSTALL,TRAY,CABLE,INCL FABRICATION/ETC LS 1

19 FOTE Equipments

19.1 ERECTION/LAYING/T&C,STM-16,FOTE Erection of Fiber Optic Terminal Equipment (FOTE) SDH (STM-16) including but not limited to installation /erection of : 1. Base equipment suitable for 04 directions in subrack fully equipped with all necessary common cards, power supply cards, other hardware & accessories including 10 Nos. optical patch cords of lengths as per site requirements, DDF etc. with redundant CPU. 2. Short Haul & Long Haul 3. E1 Interfaces & L2 Etherner Interfaces 4. Equipment cabinet for SDH and DTPC 2200mm (Alongwith 110V to 48V DC-DC Converter) 5. MDF (200 Pairs), mounted in cabinet 6. 04 command standalone Digital Tele-Protection Coupler (DTPC) fully equipped with necessary common cards power Supply Cards other Hardware accessories Connectors Cables Subtrack with E I path cords set of 04 etc. (COMPLETE IN ALL RESPECT) LS 1

20.1 EREC OF CCTV Camera System (COMPLETE IN ALL RESPECT) JOB 1

21 LIGHT LUMINAIRES

21.1 OUTDOOR LIGHTING

21.1.1 PERIFERY AND ROAD LIGHTING

a Supply and fixing of steel round pole 9.0 mt long in 1:4:8 cement concrete with 40mm brick ballast in size of 450x450x1900 and plastering of 300mm length of concrete above ground level No. 10

b Supply of junction box of size 280x225x150mm made of 16 SWG sheet with grey painting suitable for 2x4x6 C sq mm incoming cable & 2x4x6 C sq mm out going cable fitted with 3 Nos. HRC Fuse link of 5A, Cable glands, neutral link, terminal block etc. and Fixing of junction box on M.S. round pole with the help of M.S. Clamp No. 10

c Fixing of complete fitting of light luminaries with LED Lamp 110 to 130 Watt at designated height on light pole including taking out cable from junction box to light fixtures from inside pole. cable terminations and it’s testing and commissioning and earthing with 12 No. SW GI Wire No. 10

d Supply & fixing of GI pipe bend of 35mm dia 'B' class 2.5 meter long and bended at one end by quarter circle in 0.5 meter for cable entry to junction box fitted on steel round pole No. 10

e Painting of M.S. Round pole with first quality Asian /Nerolec/Burger paint, one coat of Red Oxide primer and two coats of Aluminium paint. No. 10

f Making 3 Nos. of strips of 450mm height from plinth with Post Office red colour in bottom & top and white colour in middle on each light pole of 150mm dia on M.S. Round pole and writing No. of pole. No. 10

21.1.2 SWITCHYARD LIGHTING

a Supply of junction box of size 280x225x150mm made of 16 SWG sheet with grey painting suitable for 2x4x6 C Sqmm incoming cable & 2x4x6 C sqmm out going cable fitted with 3 Nos. HRC Fuse link of 5A, Cable glands, neutral link, terminal block and Fixing of junction box on Columns with the help of 50x6mm G.I. Clamp No. 30

b Supply and fixing of GI pipe bend of 35mm dia 'B' class 2.0 meter long and bended at one end by quarter circle in 0.5 meter for cable entry to junction box fitted on column No. 30

c Supply and fixing of Light bend of 50mm dia GI 'B' class pipe 1.5 meter long bended at 1 meter at an angle of 300 for 250W HPSV light in Switchyard. No. 30

d Fixing of complete fitting of LED 110 to 130 Watt light luminaries at designated height on Column with the help of GI clamps & Light Bend cable terminations and it’s testing and commissioning and earthing with 12 No. SW GI Wire. No. 30

21.1.3 LAWN LIGHTING

a Supply & fixing of 'B'type light pole 2.5M long and fixing of cable bend pipe & its concreting in the ratio of 1:2:4 with 20mm stone granite and cement concrete in the size of 500x300x300mm including excavation, back filling, curing etc. to complete the job No. 5

b Supply of Junction Box of size 180x150x100mm made of 16 SWG steel with grey painted suitable for 2x2x6 C Sqmm cable fitted 2 Nos. HRC Fuse link of 5A & 1 No. Neutral link terminal block, cable glands etc and fixing of junction box on light pole with the help of M.S. clamps and then making plinth of size 225x300x300 in the ratio of 1:2:4 cement & coarse sand with 20mm granite with JB embedded in the plinth and the top surface of plinth being tapered from all four sides of plinth with 30mm height in the centre including all associated works of finishing, plastering etc. No. 5

c Supply & fixing of 50mm dia GI pipe light pole of 'B' class quality No. 5

d Supply & fixing of 'J' bend of 25mm dia GI pipe of 'B' class for cable entry No. 5

e Assembling and fixing of complete fitting of post top lantern with LED Lamp 40 to 45 Watt over the light poles, cable terminations, testing & commissioning etc. No. 5

f Making 3 Nos. of strips of 150mm height from plinth with Post Office red colour in bottom & top and white colour in middle on each light pole of 50mm dia No. 5

21.1.4 GATE LIGHTING

a Supply & fixing of junction box of size 180x150x 100mm as specified above at si.no. C_2 No. 4

b Assembling and fixing of Complete fitting of post top lantern with LED Lamp 40 to 45 Watt with cable terminations, testing and ,commissioning No. 4

21.1.5 CABLE LAYING AND TERMINATIONS

a Laying of 4cx2.5 sq mm copper control cable from control room to various point and for lawn lighting in excavated trench M 100

b Laying of 2cx2.5 sq mm Copper control cable for lighting in switchyard periphery, road etc. in excavated trench M 500

c Taking out above cable from junction box to light fittings fixed over the column by fixing GI clamps of 40x5mm flat with each crossed bracing on structures proper dressing etc M 500

d Excavation of trench of size 300 x 600 mm for laying of cable, putting ganga sand & Ist class bricks over the cable and then earth filling etc. 500

f Supply & fixing of Cable marker made of cast iron No. 60

21.2 INDOOR LIGHTING FOR CONTROL ROOM AND STORE

a Wiring for light point/fan point/ Exhaust Fan point/Call bell point with 3/22, 1.5mm2 PVC insulated copper conductor in PVC conduit concealed in wall with 2.24mm dia bare copper earth continuity wire & piano type switches etc. complete in all respect. Nos. 70

b Wiring for 3 Pin 5A light plug point socked outlet on existing switch board with 3/22, 1.5mm2 PVC insulated copper conductor in PVC conduit concealed in wall with 2.24mm dia bare copper earth wire continuity along with piano type switch complete in all respect. Nos. 12

c Supply and fixing of metal box of size 180x100x80mm deep in recess with suitable size of white laminated sheet cover in front including providing & fixing 3 pin 15 A socket & switch connection piano type with 7/22, 4.0mm2 PVC insulated copper conductor concealed in wall with 2.24mm dia bare copper earth wire continuity complete in all respect. Nos. 8

d Supply & wiring of sub main with PVC insulated copper wire of size & no. as detailed below along with 2.24mm dia bare copper earth wire continuity in PVC conduit concealed in wall complete in all respect.

e 2x4mm2 with 1 No. earth wire M 40

f 4x4mm2 with 2 No. earth wire M 30

g 2x1.5mm2 with 1 No. earth wire M 40

h 4x1.5mm2 with 2 No. earth wire M 50

i Supply & fixing of angle/button holder suitable for LED Lamps complete in all respect Nos. 8

j Supply & fixing of Factory Wired in-door decorative luminairs with LED Lamp for ceiling mounting with mirror optic suitable for 2x20/2x18W LED complete in all respect of category 'A' (make Philips/CGL/Bajaj) Nos. 8

k Supply & fixing of factory wired in-door decorative luminairs for surface mounting with oval polystyrene diffuser suitable for 1x20/1x18 W LED Lamp complete in all respect of category 'A' make.(make Philips/CGL/Bajaj) Nos. 10

l Supply & Fixing of complete set of street light luminair with LED Lamp 110 to 130 Watt complete in all respect with integral control gear of category 'A' make.(make Philips/CGL/Bajaj) Nos. 3

m Supply & fixing of factory wired LED light fitting suitable for 1x20W LED complete in all respect of category 'A' make.(make Philips/CGL/Bajaj) Nos. 10

n Supply & Fixing of Fancy wall bracket 1x15W LED fittings Nos. 12

o Supply & Fixing of decorative ceiling luminairs for 1x10W LED Lamp complete with round twin PVC insulated flexible cord, approved holder complete in all respect with bulb for DC lighting Nos. 7

p Supply & Fixing of 1200mm ceiling Fan complete with electronic regulator with double ball bearing and approved colour of category 'A' make as approved by Engineer. Nos. 10

q Supply & fixing of 18" Exhaust fan of category 'A' make as approved by the Engineer. Nos. 4

r Supply & Fixing of 12" Fresh Air Fan of category 'A' make as approved by the Engineer Nos. 4

s Supply & fixing of 6000 capacity Desert cooler of size made of 20 SWG galvanized sheet duly wired fitted with 18" Exhaust fan of cat 'A' make and vertical pump along with stand & other thing required to complete the jobs satisfactorily. Nos. 2

t Supply and fixing of Four Pole Isolator of 60/63 A. No. 1

u Supply and fixing of surface/flush mounting 8 ways SPN Distribution board with MCB complete in all respect. No. 1

v Supply & fixing of Call bell of approved make on white laminated sheet board including making connection etc. complete in all respect. Nos. 1

w Supply & Fixing of 600x800x8mm GI plate vertically for earthing with its top at least 3M below the ground level complete with 20mm dia GI pipe & funnel for watering and one earthing lead of one No. 8 to 10 SWG GI wire within 15mm dia GI pipe up to switch board 30cm square CI frame with hinged cover masonry housing alternate layer of charcoal/coke and salt at least 150mm thick alround etc as per direction of Engineer complete in all respect Nos. 1

x Supply & Fixing of Distribution box 6 bay TPNDB with 100 Amp. Isolator and 18 No. SP MCB of different capacity Havells make. Nos. 2

Total (INR excluding GST)

Full Signature ………………………………

Seal of Company

Designation ………………………………

Tender Specification no. ESD-678

Name of Bidder:

SCHEDULE OF QUANTITIES & PRICES FOR SUPPLY OF MANDATORY SPARES FOR 2X40MVA, 132/33kV S/s JHANSI-II (SAS based on Double Main and Transfer Bus Scheme)

S. N. Item/ Equipments along with all accessories as per specifications Unit Tendered Qty. Unit FOR (Ex-Works, Packaging, Forwarding, Freight & Insurance Charges) Rate without GST (Rs.) Applicable GST Amount @ 18% (Rs.) Unit FOR (Ex-Works, Packaging, Forwarding, Freight & Insurance Charges) Rate with GST (Rs.) (5+6) Total FOR Destination Price with GST (4x7) (Rs.)

1 SF6 CB,145KV,3150A,40KA No. 1

2 TRIPPING COIL,145KV,SF6 CB Nos 2

3 CLOSING COIL,145KV,SF6 CB Nos 2

4 Closing Coil assembly (110V DC) for145 kV CB Nos. 1

5 Trip Coil assembly (110V DC) for145 kV CB Nos. 1

6 VCB,36KV,2000A,31.5KA No. 1

7 TRIPPING COIL,36KV,CB Nos 2

8 CLOSING COIL,36KV,CB Nos 2

9 C&R PANEL,TRIPLE FEEDER,36KV No. 1

12 PT,145KV,50VA No. 1

13 CT,POL,36KV,800-400/1A,3C,0.2S (with Terminal Connector) No. 1

14 CT,36KV,400-200/1A,2C,0.2S (with Terminal Connector) No. 1

15 PT,36KV,50VA (with Terminal Connector) No. 1

16 SURGE ARRESTOR,POLYMER TYPE,120KV No. 2

17 SURGE ARRESTOR,POLYMER TYPE,30KV No. 2

18 LADDER,SELF SUPPORTED,ALUMINIUM No. 1

Total (INR excluding GST)

Seal of Company

Full Signature ………………………………

Designation ………………………………

Tender Specification no. ESD-678

Name of Bidder:

Bill Of Quantity Bill of quantity for Construction of 132/33 kV Sub-stationJhansi II, including construction of Main Gantries, Aux. Foundations,Capacitor Bank, Cable Trenches, T/F Foundation, Firewall,Control Room Building,Store Shed,Sump House , Culverts, Drainage system,RCC Road,Chainlink Fencing ,Over Head Tank,Switch Yard Turfing,Park & Plantation, Earth Filling,Rain Water Harvesting, Tube Well Boring,Water Supply System,Furniture & Furnishing along with all associated misc. Civil Works.

Sl. No. Item Description Unit Tendered Qty. Unit Rate without GST (Rs) Applicable GST Amount @ 18% (Rs.) Unit Rate with GST (Rs) (5+6) Amount with GST (Rs) (4X7)

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in All kinds of soil (DSR 2.8.1) cum 4000

2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. in Hard rock (2.7.2) cum 1500

3 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. in Ordinary rock(DSR 2.7.1) cum 1000

4 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil (DSR 2.26.1) Cum 5000

5 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.( DSR No 2.31) Sqm 4000

6 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(DSR 2.27) Cum 1200

7 Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.(DSR 2.25(a)) Cum 20000

8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(DSR 4.1.8) Cum 180

9 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 Cement : 6 coarse sand (zone-III) derived from natural sources : 12 graded stone aggregate 40 mm nominal size derived from natural sources)(DSR 4.1.10) Cum 320

10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(DSR 4.1.2) Cum 35

11 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.2 Cum 1634

12 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(DSR 5.3) Cum 72

13 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) Cum 50

14 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete(Code no 5.9.1) Sqm 1308

15 Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc .(Code no 5.9.2) Sqm 400

16 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers (Code no.5.9.5) Sqm 200

17 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (Code no.5.9.6) Sqm 600

18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)(DSR 6.1.2) Cum 30

19 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)(DSR 6.1.1) Cum 175

20 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.2 Cum 230

21 Providing and fixing Ist quality ceramic glazed wall tiles (Johnson, Somani, Kajeria) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(DSR 8.31) Sqm 40

22 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.32.1 Each 2

23 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand) DSR 6.13.1 Sqm 20

24 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)( DSR 4.10) Sqm 40

25 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. DSR-9.84 No 6

26 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness DSR 21.4.1 Each 12

27 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge .With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100 ) specifications DSR 26.27.3 Sqm 250

28 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.20.1 Sqm 10

29 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as requred In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete DSR 10.25.1 Kg 2000

30 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.DSR 10.2 Kg 52000

31 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR 5.22.6 Kg 145000

32 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-5.22A.6) Kg 28000

33 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover DSR 10.6.1 Sqm 20

34 Providing and fixing ball bearing for rolling shutters. DSR 10.7 Each 2

35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm (DSR 16.70.1) Sqm 400

36 Supplying at site :Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately).DSR 16.15.2 Kg 100

37 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 Sqm 2500

38 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) DSR 13.4.2 Sqm 5000

39 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.DSR 4.12 Per bag of cement 994

40 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.(DSR 5.30) Meter 450

41 Neat cement punning. DSR 13.18 Sqm 1000

42 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.DSR 11.39 Sqm 20

43 Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick DSR 11.13.1 Meter 100

44 Providing and laying Vitrified tiles (Johnson, Somani, Kajeria) in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size (DSR 11.41A.2.1) Size of Tile 600 x 600 mm Sqm 300

45 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile DSR 11.21.2.1 Sqm 75

46 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent DSR 11.56.1 Sqm 150

47 Finishing with Deluxe Multi surface paint (Apex) system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqmCode no.13.48.1) Sqm 500

48 Finishing with Deluxe Multi surface paint (Asian) system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture (code no.- 13.48.3) Sqm 2000

49 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 13.80) Sqm 4000

50 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.(DSR 16.1) Sqm 1000

51 Supplying and stacking at site.90 mm to 45 mm size stone aggregate (DSR-16.3.1) Cum 150

52 Supplying and stacking at site.63 mm to 45 mm size stone aggregate (DSR-16.3.2) Cum 150

53 Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate (DSR-16.3.3) Cum 150

54 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .(DSR-16.4) Cum 450

55 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(DSR 16.75-16.76) Cum 150

56 Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.(DSR 16.44) Litr 500

57 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. (DSR 16.46.1) Activity unit 300

58 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.(DSR 16.68) Sqm 250

59 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.DSR 19.35.1 Meter 30

60 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 600 mm dia RCC pipes.DSR 19.35.2 Meter 20

61 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia RCC pipes. DSR 19.35.3 Meter 20

62 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 Kg 350

63 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) DSR 21.3.2 Sqm 100

64 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 350 mm dia DSR 23.1.1.2 Meter 90

65 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia DSR 23.4.3 Meter 90

66 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia DSR 23.15.3 Each 4

67 Providing and fixing MS clamp of required dia to the top of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia DSR 23.14.3 Each 2

68 Providing and fixing MS clamp of required dia to the top of pipe assembly of tubewell as per IS:2800 (part I). 40 mm NSI 48D Each 2

69 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes DSR 18.9.3 Meter 25

70 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. DSR 23.12 Hour 25

71 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore Horizontal DSR 18.19.6.1 Each 2

72 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR 23.8 Cum 20

73 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm DSR 2.4.1 Cum 20

74 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. DSR 2.33 Sqm 120

75 Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. DSR 7.76 Each 20

76 Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.DSR 7.5 Each 20

77 Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.DSR 7.10 Each 20

78 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cast of plant & water) Trees Plant DSR 2.57.1 Each 100

79 Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.DSR 3.18 Each 20

80 Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.DSR 4.93 Each 20

81 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm & with wall thickness of 25.4 mm DSR 2.30.1 Each 100

82 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles DSR 20.3.1 Meter 100

83 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 400 mm dia piles DSR 20.3.2 Meter 100

84 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 300 mm dia piles DSR 20.4.1 Each 20

85 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 400 mm dia piles DSR 20.4.2 Each 20

86 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 50 tonne Safe capacity Routine test (Test Load 1.5 times the Safe capacity) DSR 20.6.1.2 Per Test 1

87 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.DSR 20.9 No. 1

88 Supplying and drawing following 3 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.DSR 1.17.12 Meter 200

89 Supplying and drawing following 3 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.DSR 1.17.21 Meter 200

90 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group CDSR 1.10.3 Points 85

91 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet DSR 1.24.4 each 30

92 Supplying and fixing of 20 mm of medium class PVC conduit along with accessories in surface/recess including junction box, cutting the wall and making good the same in case of recessed conduit as required. DSR 1.21.1 Meter 100

93 Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including junction box,cutting the wall and making good the same in case of recessed conduit as required. 25 mm DSR 1.21.2 Meter 250

94 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 Meter 80

95 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR 1.14.3 Meter 100

96 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire DSR 1.14.4 Meter 50

97 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 5.6 Set 2

98 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.DSR 5.12 Meter 50

99 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.DSR 2.10.1 each 20

100 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps.DSR 2.12.2 each 5

101 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.DSR 2.12.1 each 5

102 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door.DSR 2.4.1 each 5

103 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door.DSR 2.5.1 each 2

104 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 1.12 Meter 25

105 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm).DSR 1.27.1 each 15

106 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm).DSR 1.27.2 each 5

107 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm).DSR 1.27.3 each 5

108 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm).DSR 1.27.4 each 5

109 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)DSR 1.27.5 each 5

110 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm)DSR 1.27.6 Each 10

111 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. DSR 10.18 Each 10

112 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore DSR 18.10.1 Meter 40

113 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore DSR 18.10.2 Meter 20

114 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore DSR 18.10.3 Meter 20

115 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes DSR 18.8.1 Meter 150

116 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes DSR 18.8.2 Meter 25

117 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes DSR 18.8.3 Meter 20

118 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DSR 18.50.1 Each 10

119 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. DSR 18.17.2 Each 5

120 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore DSR 18.17.3 Each 2

121 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter DSR 18.22.2 Each 2

122 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.DSR 18.48A Ltr. 10000

123 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid DSR 17.2.1 Each 2

124 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1 Each 1

125 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 Each 3

126 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm DSR 17.10.2.1 Each 2

127 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern DSR 17.4.1 Each 2

128 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.DSR 17.73.2 Each 3

129 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR 17.31 Each 3

130 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28 Kg 100

131 Arranging and spreding 75 mm thick broken grit 20 mm (Granite stone) uniform for turfing over 100mm thick base course of C.C. In 1:4:8 (1cement:4coarse sand: 8, 40mm stone ballast) top finish by brooming of cement mortar 1:4(1cement: 4 Coarse sand) including supply of all materials, labour and tools and plants etc. required for proper completion. NSI-2 Sqm 5000

132 Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work (NSI-13) No 800

133 Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) . (NSI-14) No 800

134 Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work. NSI-15 No 800

135 Fixing and grouting 25 mm and below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . (NSI 16) No 1000

136 S/F in position 90 lbs M.S. Rail for transformer plinth including cost of all labour, material and T&P etc. required for proper completion of the work. (nsi-19) RM 20

137 Grouting of 90/105 lbs M.S. rail including cost of all materials, labour & T&P for fixing of rail in proper alignment, level and position in transformer plinth foundation etc. as per direction of Eng I/C. (Rail to be supplied by the dept.)(labour rates only) .NSI-18 RM 20

138 Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . NSI-22 RM 1500

139 Fixing of template in position level and alignment for grouting of Anchor bolt in main gantry (labour rate only). NSI 23 No. 80

140 Same in NSI item-23 above but for auxiliary structure. (labour rate only). NSI 24 No. 200

141 Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only). (NSI-25) No. 4500

142 Fabrication of template for main gantry foundation including cost of all labour, and T&P etc. required for proper completion of the work. Steel shall be arranged by contractor free of cost. This template shall be property of contractor.(Labour rate only). NSI-26 Number 20

143 Same as above NSI item no.-26 but for auxiliary foundations.(Labour Rate) NSI-27 Number 40

144 Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. DSR NSI-33 RM 500

145 Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete.NSI-34 RM 2500

146 2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC NSI-35 Sqm 150

147 As in NSI item No.-35 above but 4.0 cm thick floor in 1:1.5:3 concrete with out base concrete. NSI-36 Sqm 100

148 Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position NSI-37 No 1900

149 Pre-Construction anti-termite treatment, by creating a barrier under and around the columns pits, foundation trenches, under floors, junctions of Walls & floors, around the external perimetre of building, expansion joints, surrounding of pipes and conduits etc. (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981))with Eldrine emulsifiable 0.2% concentration or any other approved material such as Heptachlore or chlordance will be used. The consumption of emulsion shall be (i) Foundation and masonary @ 5 Ltrs/Sqm, (ii) Back fills in immediate contact of foundation@ 7.5 Ltrs. / Sqm, (iii) Top surface of Plinth filling @ 5 Ltrs / Sqm, ( iv) Junction of walls & floors @ 7.5 Ltrs / Sqm, (v) Soil along external perimetre of building @ 7.5 Ltrs / Sqm (vi) under apron of the building @ 5 Ltrs. /Sqm. The rates includes cost of all materials, labour, equipments, T&P complete. NSI-41 Sqm 200

150 Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. NSI-51 Job 1

151 Supply and installation of 5H.P. Kirloskar or equivalent make single stage, horizontal, self priming,three phase dewatering pumpset of specification Head 14/16 M, Discharge 13.6/10 LPS, solid handle size 15.5 mm, suction 80 mm, delivery 80 mm, RPM 1500 including cost of 80 mm dia G.I. pipe for suction (3M) and delivery (4.5 M). NSI-52 No 1

152 Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. d) for 5 H.P pump set three phase NSI-54d No 3

153 Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. d) 3 HP outlet 50 mm dia. or more, Head 60/24, Discharge 6000/14000 LPH NSI-55d No 2

154 Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. NSI 56 Meter 90

155 Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (NSI 58) No 1900

156 S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.NSI-65 sqm 150

157 S/F of Jaquar make pillar cock of model of FLR-5011N as per direction of engineer in charge. This include cost of labour, material T&P etc for proper completion of work. NSI-93 No. 3

158 Supply and fixing of Under Counter table top wash basin Jaguar make model no-CNS-WHT-903 as per direction of engineer in charge This include cost of labour, material T&P etc for proper completion of work. NSI-98 No. 1

159 Supply and fixing toilet paper holder for model no-AHS-1551 KN as per direction of engineer in charge. This include cost of labour, material T&P etc for proper completion of work. NSI-99 No. 2

160 S/F of Jaquar make long body Bib Cock of model no CON-107PM as per direction of engineer in charge. This include cost of labour, material T&P etc for proper completion of work. NSI-100 No. 5

161 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. NSI 108 No. 2

162 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. a) 75 mm Dia.NSI-109a Meter 15

163 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. b) 90 mm Dia.NSI-109b RM 15

164 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. c) 110 mm Dia. NSI-109c RM 15

165 Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C. NSI-123 Sqm 50000

166 Marking of building and foundation in new sub-station (132/220 KV) in UPPCL land as per approved layout drawing with help of Theodolite/ total station instrument and closing of Travers for main Gantry etc including cost of all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C. NSI-124 Job 1

167 Making borehole in all type of soil by any method required as per site conditions in accordance with IS specification No 1982-1979 and 1498-1970 and conducting standard penetration test in accordance with IS specification No 2131 – 1981 at every 1.5 M approx . or as per strata during making borehole and also collecting undisturbed and disturbed soil samples at a depth of approx. 1.5 M depth or change of strata of soil as per site requirements in each borehole in accordance with IS specification 1892-1978. (Depth of water table as detemine from borehole or from nearest waterwell ) Each Boreholes to be bored upto 15.00 depth. NSI-125 Meter 10

168 Supply and Fixing of 3 blade wall fan of Havells platina 400 mm or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge.NSI-132 each 5

169 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.NSI-133 each 5

170 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respectNSI-134. each 5

171 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.NSI-135 each 20

172 Supply and Installation in complete respect of 2 Ton Split AC 5 star (O General, Hitachi, Daikin make ) along with 5 KVA V Guard or equivalent make stabilizers, stands, drain pipes etc including all labour and T&P and all related works as required for proper installation and running of the system complete in all respects as approved by Engineer In Charge.NSI-130 Each 17

173 Supply and Installation in complete respect of 1.5 Ton Split AC 5 star (O General, Hitachi, Daikin make ) along with 5 KVA V Guard or equivalent make stabilizers, stands, drain pipes etc including all labour and T&P and all related works as required for proper installation and running of the system complete in all respects as approved by Engineer In Charge.NSI-131 Each 2

174 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diaMeter (DSR-12.41.2) Number 200

Seal of Company Full Signature ………………………………

Designation ………………………………

Tender Specification no. ESD-678

Name of Bidder:

Sl.No. DESCRIPTION Schedule Amount including GST (in Rs.)

1 Total Price for Supply of Equipments/Materials and Light Luminaires S-1

2 Total Price for Handling, Erection, Testing & Commissioning S-2

3 Total Price for Supply of Mandatory Spares S-3

4 Net Price for Electrical works (1+2+3)

5 Net Price for Civil Works S-4

6 Total Bid Price (4+5)

Seal of Company Full Signature …………………………

Designation ……………