Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹14.7 L+₹85,196.23 (6.17%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
1 Oct 2022, 6:00 pmClosed
GE (AF) Hakimpet
Secunderabad
REPAIR AND MAINTENANCE OF STP, FIRE DETECTION AND FIRE ALARM SYSTEM, AIR COMPRESSOR, MOTORIZED GATE AND LIFT AND OTHER CONNECTED WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET
2022_MES_549728_1
8428/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Hakimpet
As per NIT
6 documents required · 6 mandatory
₹500
GE (AF) HAKIMPET
₹29,000
Yes
9 Nov 2022
3 Sept 2022
3 Oct 2022
3 Sept 2022
1 Oct 2022
17 Sept 2022
Amount
M & L for Desludging of existing sewage well of any size of 300 KLP STP and getting out sludge in every three months through sucking super soccer machine / manually and removal and depositing at a distance n.exc 100m at isolated place all as specified and direcetd by Engr-in-Charge
M & L for Desludging of existing sewage well of any size of 400 KLP STP and getting out sludge in every three months through sucking super soccer machine / manually and removal and depositing at a distance n.exc 100m at isolated place all as specified and direcetd by Engr-in-Charge Note for Item No 1 & 2 :- (i) Pumping out sludge water from sewage well tank by using Diesel engine operated pump and necessary diesel is to be arranged by contractor during cleaning of STP. Sluge obtained shall be disposed where as directed by Engr-in-Charge
M & L for Cleaning of slude drying beds of any size of 300 KLD STP by removing sludge / vegetation from disposing sludge bed at abandoned place from cantt area completed all as specified and direcetd by Engr-in-Charge
M & L for Cleaning of slude from centrifuge of any size of 400 KLD STP by removing sludge / vegetation from disposing sludge bed at abandoned place from cantt area completed all as specified and direcetd by Engr-in-Charge
M&L for Desludging of existing equilizer tank of sewage treatment plant 300 KLD capacity and getting out sludge and removal and depositing at a distance n.exc 100m at isolated place complete all as specified and direcetd by Engr-in-Charge
M & L Desludging of existing equilizer tank of sewage treatment plant 400 KLD capacity and getting out sludge and removal and depositing at a distance n.exc 100m at isolated place complete. Note for Item No 5 & 6 :- (i) Pumping out sludge water from equaliser tank by using Diesel engine operated pump and necessary diesel is to be arranged by contractor complete all as specified and direcetd by Engr-in-Charge
M & L Desludging of existing MBBR tank 1 & 2 of sewage treatment plant 300 KLD capacity and getting out sludge through sucking super soccer machine and removed at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete. all as specified and direcetd by Engr-in-Charge
M & L Desludging of existing MBBR tank 1 & 2 of sewage treatment plant 400 KLD capacity and getting out sludge through sucking super soccer machine and removed at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete. Note for 7 & 8 :- (i) Pumping out sludge water from equiliser tank by using Diesel engine operated pump and necessary diesel is to be arranged by contractor complete all as specified and direcetd by Engr-in-Charge
M & L for Desludging of existing Tube settler tank of sewage treatment plant 300 KLD capcity and getting out sludge through sucking super soccer machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functionng complete all as specified and direcetd by Engr-in-Charge
M & L for Desludging of existing Tube settler tank of sewage treatment plant 400 KLD capcity and getting out sludge through sucking super soccer machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functionng complete all as specified and direcetd by Engr-in-Charge. Note for 9 & 10 :- (i) Pumping out sludge water from equiliser tank by using Diesel engne operated pump and necessary diesel is to be arranged by contractor completed all as directed by Engineer-in-Charge.
M & L for Desludging of existing set of chlorine contact tank, filter feed tank of any size of sewage treatment plant 300 KLD capacity and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge.
M & L for Desludging of existing set of chlorine contact tank, filter feed tank of any size of sewage treatment plant 400 KLD capacity and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge. Note for Item No 11 & 12:- (i) pumping out sludge water from equaliser tank by using Diesel engine operated pump and necessary diesel is to be arranged by contractor complete as directed by Engineer-in-Charge.
M & L for Desludging of existing under ground sewage cum pump house well at sewage treatment plant 300 KLD capacity location and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge.
M & L for Desludging of existing under ground sewage cum well of pump house well at sewage treatment plant 400 KLD capacity at diefferent locations i. e Around NP Area and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge. Note for 13 & 14 :- (i) Pumping out sludge water from equiliser tank by using Diesel engne operated pump and necessary diesel is to be arranged by contractor completed all as directed by Engineer-in-Charge.
M & L for Desludging and cleaning of of existing screen chamber, grid chamber, Ph correction chamber , distribution chamber, oiling grease chamber of 300 KLD STP and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge.
M & L for Desludging and cleaning of of existing screen chamber, finr bar screen chamber, grid chamber, anoxic tank, intermeant tank, oiling grease chamber and sluge sump of 400 KLD STP and getting out sludge through sucking super socker machine and removing and depositing at a distance n.exc 100m at isolated place. Straining PVC media and cleaning with clean water and reuse for proper functioning complete all as directed by Engineer-in-Charge. Note for 15 & 16 :- (i) Pumping out sludge water from equiliser tank by using Diesel engne operated pump and necessary diesel is to be arranged by contractor completed all as directed by Engineer-in-Charge.
S&F in replacement gear oil No -90 suitable for sewage treatment compressor blower. Make : Catrol make or equivalent as per ISI marked complete all as directed by Engineer-in-Charge.
Testing of chemical & Bacteriological quality of inlet (Raw water) and out let (treated water) sewage water of following parameters from state public health laboratory or NABL accredited laboratory.( 300 KLD STP- 03 Nos and 400 KLD STP- 03 Nos) (a) PH value (b) Suspeded solids (c) Total dissolved solids (d) C.O.D (e) BOD (f) Oil & Grease (g) FC (h) Total N
Note:- 1. Contractor will provide quarterly testing of sewage inlet & outlet water of all STP's containing following parameter : PH value, Total suspended solids, oil & grease, BOD, COD as per IS 3025 (P-1) - 1987 from Govt / State Lab or approved NABL, Accredited laboratory and rate of same is deemed to be included in unit quoted rate. 2. Contractor will provide all testing instrument and a test lab in installation for instant testing at installation / STP for BOD incubator PH value, Temperature controller, Digital Nephelo tubidity meter digital TSD meter Digital PH meter and digital water marker in water testing lab testing display chart on lab. No extra amount shall be paid for test lab & testing instrument.
M&L for in replacement of granullar sand of filter media all sizes as per existing size, complete all as directed by Engineer-in-Charge.
M&L for for Filter media for MBBR chamber complete all as directed by Engineer-in-Charge.
M&L for Carbon for activated carbon filter and dual media filter complete all as directed by Engineer-in-Charge.
M&L for in replacement of pebbles of different sizes for dual media filter and carbon filter as per existing size, complete all as directed by Engineer-in-Charge.
Supply only Calcium based Chlorine granuals disinfectant for water treatment in 45 kg plastic drums having concentration of clorine 60% to 70% complete all as specified and directed. Make : All Makes approved by E-in-C Branch.
Material and labour for replacement of Cartop call card for 10 passengers lift (Make:Johnson) complete all as specified and directed.
Material and labour for replacement of Landing card for 10 passengers lift (Make:Johnson) complete all as specified and directed.
Material and labour for replacement of Door bearing and slippers for 10 passengers lift (Make:Johnson) complete all as specified and directed.
Comprehensive maintenance including servicing of motorized hanger doors 1, 2, 3 and Igloo (05 Nos) , electricaly operated like checking of motor, door movements, limit switch, alignment of wheels and lubrication, break panel, cable checking, normal and ruotine mantenance including complete contract period complete all as specified and as directed. Note :- (i) Comprehansive maintenance includes all minor parts required and consumable /repairs of parts like limit switches, Top and Bottom wheels, Drive assembly, connecting cable, lock/unlock arrangement and repairs etc., complete all as specified and directed.
Comprehensive maintenance including servicing of Fire Alaram system at Hangers ( 05 Nos), Signal Section etc ( Entire AFS Hakimpet area), electricaly operated like checking of complete fire alaram system, break panel, cable checking, normal and routine mantenance including renewal/replacement of defective minor parts for the complete contract period complete all as specified and as directed. Note :- (i) Comprehansive maintenance includes all minor parts and consumable repairs and replacement of spare parts etc.
Supply in replacement and installtion,testing and commissioning of short circuit isolators suitable for addressable type fire alarm system complete all as specified and as directed.
Supply in replacement and Installation , Testing , Commissioning of sounders/sirens electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65db to 120db measured at 1.5 m with sound output variation +5 db 3500m range complete for fire alarm all as specified directed
M & L for Repair of existing addressable type repeater panel suitable for addressing the 5 Nos of Main Panels complete and testing on completion all as specified & directed
M & L for Repair of existing addressable type multi spectrum triple sensor flame detector with UV and IR detection capacity with suitable explosion proof enclosure complete and testing on completion all as specified & directed
M & L for Repair of existing intelligent addressable manual call point resettable type for addressable type fire alarm system complete and testing on completion all as specified & directed
Material and labour for complete checking and servicing of control panel of Air compressor and connected programmed safety features, safety switches/ cut-outs / thermostats, etc, removing and re-terminating the burnt wires, checking of all contactors/contacts for proper auto functioning and rectifying the faults/ faulty components by replacing with new spares and setting the relays setting of programming of operating parameters and safety limits ( if required) etc including replacement of MCCB/MCB/Three/Single phase preventor and suitable star delta starter suitable for upto 40 HP Pump/ Motor,indication lamps,voltmeter, Ammeter,Bus bar and interlock control wiring complete all as specified and directed by Engineer-in-Charge. Note: All components need to Air Compressor panel deemed to be included in the quoted rate.After completion,erection of panel the testing will be carried out by the contractor.
Isolating the Pneumatic Air Compressor complete unit(Make: Kirloskar, Model: TC-100) electrically and supply and replace unserviceable 'O' Rings kit and Teflon Washers for the Suction and Discharge Service Valves including arresting of any leakage and testing on completion complete all as directed by the Engineer-in Charge.
Dismantling the cylinders of air drier of Make: Summit and Model No. SHD-50/ SHD-80 and taking out the silicon granules from the cylinders carefully, drying and re-filling the same, re-assembling the cylinders and testing complete all as specified and directed by Engineer-in-Charge.
Supply and replace pre-filter element suitable for air drier of Make: Summit and Model No. SHD-50 complete all as specified and directed by Engineer-in-Charge.
Supply and replace pre-filter element suitable for air drier of Make: Summit and Model No. SHD-80 complete all as specified and directed by Engineer-in-Charge.
Supply and replace micro-filter element suitable for air drier of Make: Summit and Model No. SHD-50 complete all as specified and directed by Engineer-in-Charge.
Supply and replace micro-filter element suitable for air drier of Make: Summit and Model No. SHD-80 complete all as specified and directed by Engineer-in-Charge.
Supply and replace 'O' rings and gasket kit suitable for air drier of Make: Summit and Model No. SHD-50 complete all as specified and directed by Engineer-in-Charge.
Supply and replace 'O' rings and gasket kit suitable for air drier of Make: Summit and Model No. SHD-80 complete all as specified and directed by Engineer-in-Charge.
M & L for cleaning of area i.e cutting of vegetation around the STP 300 & 400 KLD including sump cum pump house area using machine or labour and maintaining the surroundings neat & clean upto the statisfaction of the Engr-in-Charge.
Srinivash Engineers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .