REPAIRS TO HARDSTANDING INTERLOCKING PATH FENCING CULVERT AND EXTERIOR TILES ETC IN ZONE B AREA AT NDA KHADAKWASLA

Amount

S&F in repair SFRC (Steel Fibre Reinforced Concrete) storm water (grating) drain cover of size 510mm x 660mm of MD-10 Tone capacity complete all as specified and as directed. Note : Contractor will provide manufacturer test certificate of SFRC cover & frame.

S&F in repair SFRC (Steel Fibre Reinforced Concrete) storm water (grating) drain cover of size 960mm x 510mm of MD-10 Tone capacity complete all as specified and as directed Note : - Contractor will provide manufacturer test certificate of SFRC cover & frame.

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and as directed.

M&L for PCC 1:3:6 using 20mm graded stone aggr type C-1, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for providing plain cement concrete 1:4:8 type D2 using 40mm size grade stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M & L for Plain cement concrete type C-1 using 20mm size graded stone aggregate (1:3:6) as in sub base or simillar works complete all as specified and as directed.

M & L for Plain cement concrete type B-1 using 20mm graded stone aggregate (1:2:4) as in hard standing /path etc or simillar works complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates as in surface channels and drains etc complete all as specified and as directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc complete all as specified and as directed.

M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 grade and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for providing rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even and smooth without using exta cement fair complete all as specified and as directed.

M&L for 3mm thick Neeru finish to plastering complete all as specified and as directed.

S&F in repairs precast cement concrete PCC 1:2:4 ty B0 (using 12.5mm graded agregates) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame set in CM 1:6 complete all as specified and as directed.

M & L for two coats of cement based paint over one coat of chalk whiting primer on wall surfaces including preparation of new treated surface complete all as specified and as directed.

Demolition and breaking up 150 mm bore drain pipes (SWG,AC or RCC pipes) set in CM complete all as specified and as directed.

M&L for providing reinforced cement concrete pipe 150mm bore class NP-3 with collars laid and jointed with cement complete all as specified and as directed.

Demolition and breaking up 200 mm bore drain pipes (SWG,AC or RCC pipes) set in CM complete all as specified and as directed.

M&L for providing reinforced cement concrete pipe 200mm bore class NP-3 with collars laid and jointed with cement complete all as specified and as directed.

Demolition and breaking up 300 mm bore drain pipes (SWG,AC or RCC pipes) set in CM complete all as specified and as directed.

M&L for providing reinforced cement concrete pipe 300mm bore class NP-3 with collars laid and jointed with cement complete all as specified and as directed.

M & L for Cement Concrete 1:3:6 Type C-1 unsing 20 mm size graded stone aggregates bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150 mm bore drain pipe etc complete all as specified and as directed..

Ditto all as per item no 22 above but for 200 mm dia pipes

Ditto all as per item no 22 above but for 300 mm dia pipes

Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required etc complete all as specified and as directed.

Ditto all as per item No 25 above but 200mm dia pipe

Ditto all as per item No 25 above but 300mm dia pipe

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide for foundaton etc.in hard dense soil and getting out in complete all as specified and as directed.

Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm (hard dense soil) complete all as specified and as directed.

Removing excavated material not exc 50mtr and depositing where directed at a level not exc 1.50mtr above the starting points in any type soil complete all as specified and as directed.

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 100mm pipe complete all as specified and as directed. Note: Excavation & earth work shall be measured and paid separately

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 75mm pipe complete all as specified and as directed. Note: Excavation & earth work shall be measured and paid separately

M&L for providing cast iron, soil & waste and vent pipes in any length, with or without ears with cement joints fixed to walls using pipes 75 mm bore complete all as specified and as directed.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls using pipes 100 mm bore complete all as specified and as directed.

S&F of CI bends (any radius) diminishing pieces or taper, 100mm bore complete all as specified and as directed.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 100 mm bore complete all as specified and as directed.

S&F of CI bends (any radius) diminishing pieces or taper, 75 mm bore complete all as specified and as directed.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 75 mm dia, complete all as specified and as directed.

S&F of CI branch pieces single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches 100 mm bore complete all as specified and as directed.

S&F in repairs for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F in repairs for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) junction single(single T) complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) junction single (single T) complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforced cut to required to facilitate demolition) in any description and in any position not otherwise specifically provided for including removing debris outside of Md land complete all as specified and as directed.

M&L for RCC nominal mix type B1(using 20mm size graded stone agregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for precast RCC (1:2:4) type B-1 (using 20 mm size graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as specified and as directed. Note : Reinforcement to be measured and paid separately

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT Bars 10mm dia and over cut tolength bent to shape required uncl cranking bending and spirally for hooping for colums hooking ends and binding with ms wire n. less than .9mm dia complete all as specified and as directed.

M&L for flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as MS gates, grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming complete all as specified and as directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling stone slab of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar etc complete all as specified and as directed.

M&L for 30mm to 35mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3) complete all as specified and as directed.

Ditto all as per Item No 61 but except sahabad stone

M & L for 18 to 20 mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps,, jambs, pillars, window cills, cooking platforms, platform in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges, surfaces over 20 mm thick screed bed in CM 1:4 fixed in repairs complete all as specified and as directed. Note: Colour Lakha red, flamed granite whereever necessary, Telephonic black or as decided by Engr-in-Charge

Ditto all as per item No 63 above but except stone

M&L for Milky white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types over 20 mm thick screed bed in CM 1:4 etc complete all as specified and as directed.

M & L for 300X300X10-12mm thick colour glazed designer dura stone tiles (heavy duty tiles) of any approved colour, heavy duty machine pressed including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

M&L for 400X400X10-12mm thick colour glazed designer dura stone tiles (heavy duty tiles) of any approved colour, heavy duty machine pressed including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

M&L for 600X600X12-15mm thick colour glazed designer dura stone tiles (heavy duty tiles) of any approved colour, heavy duty machine pressed including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm /20cm x 20cm x25 mm / 40cmX40cmX 35mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry over 15 mm thick screed bed in CM(1:6) in floors etc complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as specified and as directed.

Ditto all as per item No 71 above but except tiles

M&L for 12 to 16 mm thick Dholpur stone tiles for cladding, (superior quality) machine cut, in skirting/ dado, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of tiles, size and shape of tiles as per existing, laid over 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and as directed.

M & L for forming 12 mm thick Expansion joints to the full depth of pavement concrete filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade A thickness of slab not exceeding 20cm thick complete all as specified and as directed.

M & L for forming construction/dummy joints of size 10 mm wide x30 mm deep filled with sealing compound Grade 'A' including priming the surface complete all as specified and as directed.

M&L for Road cutting and repair to disturbed road with PCC (1:2:4) type B2 100mm thick over 150 mm hard core of broken stone of gauge n exc 63 mm over rammed earth etc complete all incl cutting of road portion complete all as specified and as directed.

M&L for Providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including demolition of existing broken stone and making drainage opening wherever required complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of primer including preparation of new surfaces of concrete / brick / stone exc 10 cm width or girth complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

S&F expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n exc 4kg per sqm complete all as specified and as directed.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members n exc 4kg per sqm complete all as specified and as directed.

Ditto all as per item no 82 above but fixing only

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed Note: each line wire to be measured

Excavation in post holes in hard dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

Febrication only Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') etc complete all as specified and as directed.

Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and as directed.

DEEPARTH INFRASTRUCTURE

S Y Itkar Construction and Company

OM GANESH CONSTRUCTION

Mehta and Co.

Mourya Construction