RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Lathe Machine ( 2 pieces ) Technical Specifications 1/9 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Standards Lathe Machine Confirming to IS 6893-1988 Latest (For Technical Evaluation) Yes Yes Lathe Machine Material Confirming to IS 210 Latest(For Casting ) Yes Yes Lubrication System Requirement as per IS:11118 Yes * Cooling System Requirement as per IS :11118 Yes * Positioning Accuracy as per IS:1878 latest for Cumulative Error Yes * Positioning Accuracy as per IS:1878 latest for Repeatibility Yes * Positioning Accuracy as per IS:1878 latest for Backlash Yes * Positioning Accuracy as per IS:1878 latest for Minimum Possible Requirement Yes * Geometric Accuracy as per IS 1878-1971 latest for general purpose lathe Yes * Geometric Accuracy as per IS 6040-1972 latest for precision lathe Yes * Machine Bed & Tail Stock casting Grade as per IS 11118-1997 latest Yes * Tail stock sleeve case hardening steel 15Ni7Cr4M02 as per IS 1118-1997 latest Yes * Head Stock Drive gears Conformity confirming to Alloy steel material specification 15 Ni 7 Cr * 2/9 4 M02
Requiredhardened 58-62 HRC and profile ground with 0.8 micron surface roughness Ra value Main Spindle Conformity confirming to C2R grade forged Steel and hardened 58-62 HRC. ground with 0.8 micron surface roughness Ra value * Performance Parameters Manually Operated Lathe Yes * Geared Mechanism Yes * Lathe Machine Type Center Lathe Center Lathe Nature of Duty of Operation of Lathe Heavy Duty Lathe Heavy Duty Lathe Distance Between centers (mm) x Swing over Bed (mm) 800 x 350 800 x 350 Swing Over Bed (in mm) 300 300.0 Center Height in mm 165 165.0 Swing Over Cross Slide in mm 190 190.0 Swing Over Carriage Wing in mm 120 120.0 Swing in Gap in mm 580 580.0 Width of Gap in Front in mm 80 80.0 Type of Bed Flat Shaped Flat Shaped Length of Bed in mm 1000 1000.0 Width of Bed in mm 240 240.0 Gap in Bed in mm ( Only for Gap Lathe ) for rest Put 0 80 80.0 Rapid Transverse of saddle & Cross Slide Yes Yes Maximum Feed Force 150 150 Maximum Facing Diameter in mm 330 330.0 Maximum Weight of work piece that can be held between chuck and supported 150 150.0 3/9 by Live center in kg Maximum Weight of work piece that can be held between chuck and supported by dead center in kg 100 100.0 Maximum Torque on Spindle in NM 500 500 Type of Spindle - * Size of Spindle in mm 40 40.0 Type of Spindle Nose - * Taper in Spindle Bore as per IS 2582-1972 with Latest amndmt - * Taper Bore in Spindle Sleeve as per IS 1715-1986 with Latest amndmt - * Bore in Spindle in mm 40 * Range of Spindle Speed in Forward Direction in rev/min - * Range of Spindle Speed in Reverse Direction in rev/min - * Type of Chuck 3 Jaw Self Centered 3 Jaw Self Centered Travel of Cross Slide in mm 200 200.0 Travel of Top Slide in mm 100 100.0 Type of Tool Holder - * Tool Shank Size as per IS 1983:1958 latest in mm x mm - * Main Motor Power in kw 6 6.0 Rapid Traverse Motor Power in kw 2 * Type of Cooling - * speed of coolant motor in rev/min 350 * Noise emitted by Machine in db as per IS 10998:1984 latest 85 * Mechanical Guarding Yes * 4/9 as per IS 9474 :1980 latest In possession of Technical Evaluation report as per IS :11118 Yes * Main Spindle Bearing confirming Pre-loaded of Standard make Yes * Confirming of machine towards dynamically balanced spindle and other parts Yes * Spindle Forward/Reverse Drive transmission through Electro Magnetic Double Clutch Yes * Spindle Forward/Reverse Drive transmission through Hydraulic Friction Clutch Yes * Types of power supply 3 Phase 3 Phase Erection and Commisioning Charges included in Offered Prices without Foundation Yes Yes Warranty in Years 1 1 Annual Maintenance Contract Rate included for Machine No No Period of AMC 0 0 Coolant Pump output in kw as per IS 2161:1962 Latest 1.1 1.1 Coolant Pump Discharge at maximum working height as per IS 2161:1962 with latest amndmt in l/min 1.1 * Dimensional Parameters Minimum Chucking Diameter in mm 150 150.0 Maximum Chucking Diameter in mm 100 100.0 Tail Stock Sleeve Diameter in mm 38 38.0 Tail Stock Spindle - * 5/9 Taper as per IS 1715:1986 with latest Maximum Offset of Tailstock on either side of Center Line in mm 10 10.0 Sleeve Travel Type(Tail Stock) Manual Manual Travel of Sleeve in mm 125 * Hardness of Bed Guide Ways in HRC 0.2 * Lead Screw Diameter in mm 25 * Lead Screw Pitch in mm - * Longitudinal Lead Screw Feed Range in mm/rev - * Cross feed Range in mm/rev - * Metric Thread Range in mm - * British Thread Range in TPI - * Module Thread Range in mm 30 * Diameteral Pitch Range in mm 40 * Type of Lubrication - * Length of Lathe Machine in mm 1000 1000.0 Width of Lathe Machine in mm 600 600.0 Height of Lathe Machine in mm 950 950.0 Weight of Lathe Machine with electrical and standards Accessories 550 550.0 Colour of Lathe machine as per IS 5 :1978 with latest amndmt - * Machine Confirming Full power cutting load test to full length Yes * 6/9 Turning capacity of Machine Availability of Drawing for Foundation Yes * Lead screw Ground profile& Pitch accuracy 0.03 mm over a length of 300 mm * Standard Accessories Driving Plate With Peg Yes * Coolant Equipment & swarf tray Yes * Splash Guard Yes * Spindle Reduction Sleeve Yes * 60 Deg Dead Centre-2 Nos Yes * Quick change tool post with Tool Holders Yes * Quick indexible Square tool post Yes * A Set of Operating Instructions Manual & a set of operating tools Yes * Optional Accessories 3 Jaw Self Centering Chuck Yes * Precision 3 jaw Self Centering Chuck( Hydraulic/Pneumatic complete Chuck ) Yes * Chuck Guard Yes * Rear Tool Post Yes * Universal face plate Yes * Precision Face Plate Yes * Cast iron Face Plate Yes * Collet Chuck & Collets Yes * Rear Tool Holder Yes * Steady Rest Yes * Roller Steady Rest Yes * Follow Rest Yes * Longitudinal Stop Yes * Roller Stop Yes * Taper Turning Attachment Yes * A Set of Change Gear For DP Threads Yes * 7/9 Multi Copying Attachment Yes * Machine Lamp Yes * Swraf Tray Complete with coolant equipment Yes * Four Jaw Chuck Yes * Reports Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification Yes * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Copy of Test report to be furnished to the buyer on demand at the time of Supplies Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
