Creation of barrier-free and accessible infrastructure under SIPDA in the office building at SC, ST BC dev. Corporation, Muthi, Jammu

Providing and laying coloured self adhesive PU -Tactile tiles, ground surface indicators made of polyurethane of size 300 x 300 mm for guiding/warning to the visually impaired visitors in the center/ sides of approach path way as per specification and Harmonised guideline complete in all respect to the entire satisfaction of Engineer-in-charge.

BRAILLE SIGNAGE-Providing and fixing multilingual braille (raised dost) directional signage of size 6" x 9" as per accessible standards 2 and having 3mm thick acrylic Base plate with upper case san serif wors. White acrylic non glare cut out Letters of height 1srnm raised not 3 less than 0.8mm above base plaate and the word written in Hindi or English non glare acrylic letters of height 15mm raised not less that 4 above base plate and having a non glare arylic cut out arrow pointing in the required direction, Each signboard as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from floor as per design/specifications and harmonised guidelines as per the specification of Enginer-In-Charge.

Tactile layout plan-P/F of tactile layout plan of size 900mm x 600mm as approved design, made of 3mm thick acrylic non glare base plate and non-glare cut-out symbols with grade One/ Two Braille on which individual facility points, like inquiry, reception restrooms medical room/first aid, cafeteria or breakout area, lounge, meeting room, conference room etc present the respective floors with pictograph wherever needed all in tactile raised by minimum of 1 to 2 mm in various colours to make it legible for seniors, partial vision impaired etc. All the facility names should be in Braille, along with English. The entire block of tactile signs should be mounted on a slant/inclined frame either movable or fixed for easy reading. The map to be installed at specified locations and installed at a height of 800mm from ground level as per harmonized guideline and satisfaction of Engineer-In-Charge.

Braille indicator: Providing and fixing acrylic Braille indicators for and rails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specifications and guidelines as per the entire satisfaction of the Engineer-in-charge

Providing and fixing of conspicuty tape 50mm width, on of treads in staircase including, cutting, pasting etc. As per harmonised guidelines complete in all respect to the entire satisfaction of Engineer-in-charge

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).