SPL REPAIR TO BLDG NO LA 13 AND SOLAR STREET LIGHTS AND EXTERNAL WATER SUPPLY DISTRIBUTION PIPE LINE AND REPLACEMENT OF EXISTING WATER SUPPLY PIPE LINE FROM MES WATER POINT TO SHAUGAON B AT BAGRAKOTE UNDER GE SEVOKE ROAD

Amount

Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified

Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for RCC 1:2:4 , type B1, 20mm graded stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No.13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.

M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement. Note : WPC shall be measured seperately.

M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4, Type B-1 (using 20mm graded stone aggregated) as in sub-base to flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.

M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut kota stone in vertical surfaces as in skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated.

S&F factory made 2nd class hard wood rail and style 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood all as specified

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work. complete all as specified

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded.

All as per item No 28 above , but without glazing bars complete all as specified..

S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.

S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified.

S&F 300 mm long mild steel sliding door bolts plate type stove anamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nut four on bolts plate & two on staple plate complete all as specified.

S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified.

S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed..

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Gde-E 250 Quality A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)

M&L for Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work Fe-290.Gde-E-165, complete all as specified and as directed.

M&L for Preparation of new or previously untreated wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting on wall complete all as specified and as directed

Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed

M&L for point wiring for light/fan/call bell etc. controlled by one switch with 1.50 Sqmm (nominal area) FRLS PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable drawn through and unsheathed single core solid copper conductor cable of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, including rigid PVC concealed conduit (Medium Grade) of suitable size, with all fittings and accessories including provision of mild steel terminal boxes of suitable size made with 1.2 mm thick mild steel sheet duly galvanised and suitable for fixing switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for one light / fan point controlled by one switch all as specified and directed.

All as per item No. 52 here-in-before but for 5/6 Amp socket point on independent board -ditto-

All as per item No 52 here-in-before but with 2.5 Sqmm cable for 15/16 Amp socket point on independent board and 2.5 sqmm solid copper cable for earth continuity conductor.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 3 terminals complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts complete all as specified and as directed.

S&F LED tube light fittings 4 ft, 20w with aluminium batten heavy quality with connected arrangement complete all as specified and directed.

S&F SPN MCB of capacity 32 Amps, 240 volts, C curve, 10 KA breaking capacity complete all as specified and as directed.

Supply and fixing 25 watt LED street light luminaires with highly efficient lighting in & including mounting bracket made out of GI pipe light grade 25-40mm bore not less than 01 mtr long duly fixed with wall with fixing arrangement such as clamps, nuts, bolts complete all as specified and directed by the Engr in charge.

S&F MCB, SP,240 volts, breaking capacity 10 KA C curve, rating 6 to 32 amps, complete all as specified and as directed.

Taking down old unserviceable ceiling fan, connecting wire etc complete all as specified and directed by the Engr-in-Charge. Note:- Old ceiling fan shall be deposited in MES store yard.

Supply and fixing energy efficient, 5 star rated BLDC ceiling fan 1200mm sweep without remote, with all acceesories and connecting up with the ceiling rose with new flexible wire of suitable size complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe light grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, including salt & charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,08Ways, double Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall all as specified and as directed

Supply and fixing integrated stand alone (all in one) LED street light system of 20W with and including monocrystalline SPV panel and Solar lithium battery fixed with connected necessary arrangement i.e. nut bolt etc on existing pole complete all as specified and as directed.

M&L for cement concrete 1:4:8 as in foundation for fixing of GI pipe complete all as specified.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose soil getting out and levelling of bottom surface to required level for cable/pipe all as directed.

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.

Taking up or down from any position existing steel water tubing, from trenches/walls/floors including all fittings, segregatting and stacking the serviceable pipes and fittings properly at site for re-use complete all as specified and as directed for following sizes:- Note:- Excavation/earth work shall be measured and paid separately under respective item.

40 mm bore

50 mm bore

80 mm bore

100 mm bore

15 mm bore

Laying/Fixing only old serviceable steel water tubing, galvanised and connections in new or old situation/allignment including all new fittings (in trench) of pipe as recovered above including de-scaling/cleaning of pipe (intenally and externally) cutting and threading of tubing ends complete all as specified and directed of following sizes:-

40 mm bore

50 mm bore

80 mm bore

100 mm bore

S&F steel water tubing galvanised, medium grade with all fittings and laid in trenches, in old/new situation of following bore of pipe complete all as specified and directed.

40 mm bore

50 mm bore

80 mm bore

100 mm bore

15 mm bore

S & F sluice valve PN 1.6 with stainless steel spindle both ends flanged and drilled with necessary holes for bolts including jointing materials viz, bolts, rubber gasket etc iron wheel head including flange joints and making necessary arrangements to fix in position including taking down old unserviceable sluice valve complete all as specified and directed .

100 mm bore

80 mm bore

M&L for construction of valve chamber of size 90mm x 90mm x 90mm (internal dimension) with MS sheet cover 3mm thick with angle iron frame of size 40 x 40 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing,complete all as specified and as directed.

Taking connection from existing DI pipe by cutting the DI 150mm/100mm complete all as specifed and directed. Note:- DI fittings shall be measured separetely

S&F cast iron air valves with two air outlets of size 80 mm bore with both end flanged including connected nut, bolts, washer etc and making necessary arrangement and fixing in GI water supply mains of size 50 mm bore complete all as specified.

M&L for boring under road crossing for passing GI/DI pipes 100mm bore complete all as specified and directed

Supply, laying, jointing and testing of Ductile iron (DI) 100mm bore, pressure pipes Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end, Class K-9 conforming to IS:8329 with (push-on) rubber gasket jointing and inside cement mortar lining duly ISI marked laid in trenches complete all as specified and directed Engineer In Charge. Note:- Cast of jointing materials including jointing of pipeline deemed to be included in the unit quoted rate.

Supply and fixing, non return valve of class 1.6 PN, 80 mm (3") with both end flanged including connected flanged joint and making necessary arrangement complete all as specified and directed.

S&F cast iron air valves with two air outlets of size 100 mm with both end flanged including connected nut bolt, washer etc and making necessary arrangement and fixing up in cast iron water supply mains complete all as specified.

Supply and fixing in repair monoblock pump set 65x80mm dia suction of capacity 15HP, discharge not less than 600 lpm including connected arrangement i.e. nut bolt, washer etc complete all as specified and directed. Note:- Foundation of pump shall be included in unit quoted rate.

Cleaning of Under ground sump, RCC tank of capacity 50000 golons by de- watering duly scraping the inner surface cleanig the same with bleaching powder including lime wash of the complete inner portion of tank all as directed by Engr-in-Charge. Note- (i) Cost of safty equipment such as safty belt and Scafolding etc is deem to include in item rate.

S&F repair fully automatic star delta starter 15HP with consisting FN 32 with 3 Nos 32 Amp fuse, star contactor MNx12, 240V Delta and Main contractor MNx18 240V, add on block 2 No + 2 NC over load relay MN2, 16-44 Amp range, single phase, over load, phase reversal and locked rotor, over voltage and under voltage relay complete all as specified and directed.

Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes of class "K-9" i.e. Mechanical seal bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm bore including taking out Unserviceable complete all as specified and directed

S&F in replacement 40mm bore gate/globe valves cast copper alloy high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified.

M/s. STRUCTURES INDIA

SRI SURAJIT SENGUPTA

M/S.TIRUPATI CONSTRUCTION

Raj Enterprise

M/S Bikash Saha

M/S ASOKE KUMAR MAJUMDER

SHRI JIBANDHAN PAUL