Renovation of Guest House at INA Colony, New Delhi for the year 2023-24

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling of flushing cistern of all types (C.l./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling /removal of sink and wash basin at various location and submission of unservicable item to authorized representative of EIC.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in- Charge. Internal Work- Exposed on wall

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes

12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to 1S: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 1200 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and fixing conceal pvc single piece conceal flushing cistern model no.JCS-WHT-2431S with istallation kit & S type drain pipe connection set for wall hung W.C including control plate Opel model no JCP-CHR-152415 controlled device with all fittings and fixtures complete of Jaquar Make or equivalent as per Direction of Engg-in Charge.

Providing and fixing white Wall Hung WC of size 360x580x360 mm (Cat no. ARS-WHT-39951UFSM) of jaqure make with UF soft close slim seat cover,Hinges,Accessories Set complete or as per direction of Enginner -In-charge.

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing Counter Top Basin of model no ALS-WHT-85601 Size: 705x460x195 mm of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof andfire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Frame size 50 x 100 mm

Frame size 65 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

30 mm thick

35 mm thick

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mmx

Providing and fixing ISI marked SS sliding door bolt of size 200x16mm with nuts and screws etc. complete. 200x16 mm

Providing and fixing Single lever exposed part kit of divertore consisting of operating lever wall flange (with seals) and bottome only including with Concealed Body for Single Lever Diverter (ALD-075) 40mm Cartridge with Button Assembly, Cartridge Sleeve (ButtonOn Bottom) of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing Bathtub Spout with Wall Flange (cat no.SPJ-81429) of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing Exposed Part Kit with regular body Concealed Stop cock 20mm wirh protection cap (ALD-089) Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal Model No ALI-85083K (compatible with LD-083, ALD-089 or ALD-081) of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses cat no ALI-85011B of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing Angular Stop Cock of model no ALI-85053 of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm

Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :100x60x2.50 mm

Providing and fixing S.S pipe curtain rods with brackets complete : 25 mm dia

Providing and fixing Overhead Shower 140mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System model no OHS-1769 of Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304body. Using R2 series with frame (70 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system. (Height above 1.8 metre).

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. 9.147.D1.1 Using R1 series with frame (33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre).

Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (65 mm & above) x (65 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 1.8 metre).

Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (65 mm & above) x (65 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 1.8 metre).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and Fixing of SS HANDLE S-TYPE FOR GLASS DOOR shutters of model no SDH-301 total length 350 mm and hole to hole distance 255mm,25mm tube dia with the glass hole 12mm dia Rinox make or equivalent as per Direction of Engg-in Charge.

Providing and fixing Round Glass Door Stopper model no RDS-102, Floor Mount with necessary screws etc of Rinox make or equivalent as per Direction of Engg-in Charge.

Providing and Fixing toughened glass door corner lock with EPL of make ozone with necessary screws etc. complete.

Providing and fixing in position Laminated Counter over head storage of Depth 300 mm and height 600 mm with 1 no shelf at centre , storage to be of desired length having Carcase made in Both side laminated HDHMR board of make Green/Action Tessa having white shade factory pressed laminate on both sides as sides/shelves/dividers/verticals/horizontals in 18 mm thickness , having backing of 12 mm thick both side laminated HDHMR Ply .Front to be made in 18 mm thick MR board with all edges of shutter to be fixed with PVC Edge bended tape in desired shade , full storage to be fixed in line and length to wall of approved design.All front outer area to recieve 1.0 mm thick laminate fixed with adhesive and all inner surfaces made in both side laminated HDHMR board as all internal sides/shelves/dividers/back of front and inside of back in white shade laminate , all complete as per entire satisfaction of Engineer-in-charge. (1 mm laminate/shutters/all fittings to paid in seperate item) {For payment purpose front area to be measured}.

Providing and placing in position Laminated storage of Depth ranging from 500 mm to 600 mm of desired size and shape having Carcase made in HDHMR board of make Action Tessa/HDWR board of make Green as sides/shelves/dividers/verticals/horizontals in 18 mm thickness , having backing of 12 mm thick HDHMR/HDWR Ply ,Carcase of storage to be made in Both side laminated (BSL) High Density High Moisture resistant board with white colour factory pressed laminate to be fixed as sides/top/bottom/dividers/shelves etc ,all edges of carcase to be lipped with required PVC tape fixed with Polybond adhesive in required design, Shutter to be made in ,MR Board duly supported on rail hinges skinned with laminate on both sides and edges skinned with pvc edge tape ,Storage to have provision to accomodate all required standard hardware fittings i.e hanging rod/handle,lock,t bolt etc ,Storage to have provision for drawers with laminate all over and run on telescopic channels with collapsible handle to operate and full storage to be fixed in line and length to wall with skirting etc of approved design.(drawers and all fittings such as handles/locks/tower bolt/hinges/front Shutter/1 mm laminate to be paid in another item ) all complete as per entire satisfaction of Engineer-in-charge {For payment purpose front area to be measured}.

Providing and Fixing shutters to existing storage in MR board of make Green/merino/duraply/Century hanged on rail hinges in SS finish ,edges of shutters to be fixed with required PVC tape on all edges , duly aligned with storage to recieve laminate on both sides of approved shade (all fittings such as handles/locks/tower bolt/1 mm laminate to be paid in another item ) all complete as per entire satisfaction of Engineer-in-charge.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and fixing Soap Dish Holder model no AKP-35731P of Jaquar make or as per direction of Engg-in Charge

Providing and Fixing health faucet with 1.2 m long pvc tube and wall hook of Jaguar Make (ALD-563) etc. complete as per satisfaction of Engineer-in-charge

Providing & fixing Anti cockroach floor drain jali in the SS 304 grade complete as per direction of Engineer-In-Charge

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing 2 Way Bib Cock with Wall Flange cat no ALI-85041 of Jaquar make or equivalent as per direction of Engg- in-Charge

Providing and fixing brass ball valve with half turn brass handle of approved quality as per direction of engineer-in-charge.

Providing and fixing Paper Holder with Flap Recessed Type (Stainless Steel) of cat no AHS-1553 of Jaquar make or as per direction of Engg-In-Charge.

Providing and fixing Corner Glass Shelf (with Bracket) CAT NO ACN-1173 of Jaquar make with all complete screws, rawl plugs etc.or as per direction of Engg-In-Charge.

Providing and fixing Towel Rack with Lower Hanger (Stainless Steel) with hook cat no AHS-1581H of Jaquar make or equivalent with all fiting etc complete or as per direction of Engg-In-Charge.

Providing and fixing PVC Nahani trap, having 100mm inlet and 100mm outlet of approved make as per direction and entire satisfaction of EIC.

Providing and fixing required size beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing & fixing kitchen sink with drain board Make - Cera Model No. B4512121 - Gloss finish Single bowl sink manufactured from 1.0 mm thick 304 grade stainless steel Size: 1041 x 508 mm (41" x 20") Depth: 203 mm (8") or equivalent as approved, specified and directed by Engg-in-Charge.

Providing and fixing Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model no FLR-5165 of jaquar make ) With Connecting Legs & Wall Flanges Jaquar make or equivalent as per Direction of Engg-in Charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engg-in- charge. With brass cover plate minimum 1.25 mm thickness

Providing and fixing glazing in uPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engg-in-charge . With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing atall height wall panelling with phenol bonded Bamboo Mat board conforming to 1S:13958-1994 including providing and fixing to frame work made of 50 mm x 50 mm hard wood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 12 mm thickness

Providing and fixing roller blinds of required size i/c all necessary fittings and accessories (MAKE- Mac/Vista/Deck or equivalent as approved by EIC) complete as per manufacturers instructions and all as specified, approved and directed by Engr-in-Charge.

Dismantling old washed stone plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Deduct for taking away of C.P. brass/Brass bib cock, stop cock, long body bib cock, long nose bib cock, angle valve, ball valve, close hole basin mixer, C.P. waste in basin/ sink and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/measured before removing from the site in the presence of Engineer-in-charge or his authorised representative all complete.

Deduct for taking away of SCI pipe fitting, centrifugal cast (spun)/sand cast iron pipes and fittings, C.I. flushing cistern, G.I. pipes and fittings, steel doors, window, ventilators, grill, round or square bars etc. and the like item received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative all complete.

Deduct for taking away of PVC connections, PVC flushing cisten with fittings, PVC over head tank, PVC bib cock, stop cock, ball valve, loft tank etc. and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative all complete.

Deduct for taking away of aluminium butt hinges, sliding door bolts, aluminium door/window, tower bolts, pull boly lock, handle, door stopper, casement stay, tee chanals, plates, frames, shutters, partition, tubular sections etc. and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative all complete.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

kailash chawla

CREATORS ENGINEERS AND INTERIORS

Swami Contractors Pvt Ltd

ESS KAY CONSTRUCTIONS

SIROHI CONSTRUCTION CO

JAI RAJ CONSTRUCTION

Bharat Construction

Khairati Lal

R.K. ELECTRICALS & INTERIORS