REPAIRS / REPLACEMENT TO ROOF SHEETS, PPGL SHEETS, APPROACH PATHS, PRECAST RCC WALLS AND OTHER MISC B/R ITEMS AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling structural steel work including doors, gates but excluding framed truss etc

S&F Framed work rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -250- as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. tubular purlins post, rafter including necessary cutting welding etc complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed

M&L for filling of gap portion of gable wall with PCC (1:3:6) type C1 of any height with suitable arragement of shuttering & formwork all as specified and directed by EIC.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cum in hard /dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate ) in foundation for post holes

S&F Framed work such as MS grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Dismantling fencing wire mesh, any type

Supply only chain link fencing MS galvanised incl line wire any mesh size & standard rails , straightning bolts etc including providing of binding wire.

Fixing only chain link fencing including MS galvanised incl any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

M&L for 6 to 8 mm dia TMT bars cut to length and binding with mild steel wire (Annealed) not less than 0.9 mm dia complete all as specified.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of new surfaces.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n exc 15cm long dia of neck in mm 16 mm to 20 mm complete alll as specified and directed.

S&F steel work in such post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in , etc., and similar work conforming to Fe-290 Gde E-165 rails braces holdfast etc

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick(below or above ground level)

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing.

M&L for rubber moulded machine pressed precast interlocking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

S&F for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (12.5mm graded stone aggregate) as in compound wall,planks/panels locking each other as per approved design/patterns, set in cement mortar 1:4 ,(measured solid), including all mouidings but excluding frame and including removing and dismantling old unserviceable precast wall, complete all as specified and directed. (Note: (i) The quoted rate shall be inclusive of cost of reinforcement, form work. (ii) Columns/ poles will be measured seperately.

M&L for providing precast RCC (1:2:4) type B-1, (20mm graded stone aggregate) as in columns, posts, boundary pillars with grooves to locking RCC planks and set in mortar 1:4 complete all as specified and directed. (Note:The quoted rate shall be inclusive of cost of reinforcement,Form work)

M&L for providing and laying at or near ground level factory made LED coloured kerb stones including 4 nuts and bolts per kerb stone and necessary power supply arrangement of standard size fixed in position to the required line,level and curvature, fixing at site per manufacturers instruction, including making drainage opening wherever required complete all as specified and directed by Engineer-in-charge.Make: Madhur or equivalant as approved by GE.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 95,032.64 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S B R BHALERAO (BID ID -3118682)

Abhiraj Enterprises (BID ID -3109021)

MAHIMA CONSTRUCTION (BID ID -3105903)

Srujan Associates (BID ID -3118231)

J Sams Contructions (BID ID -3117947)

M/S R.K.S. CONSTRUCTION (BID ID -3119111)

VS CONSTRUCTION (BID ID -3110663)

Bidder Name

MAHIMA CONSTRUCTION

M/S B R BHALERAO

A V S Builders

J Sams Contructions

Srujan Associates

M/S R.K.S. CONSTRUCTION

Abhiraj Enterprises

VS CONSTRUCTION