Providing and installation of One Deep tube well to made functional in all respect including all features at Solang Tourist point in Tehsil Manali Distt Kullu HP

Providig and fixing Submersible pump set (water field) of KSB/Kirloskar/Crompton/BS/Angel/ all approved make confirming to ISI Code 8034-1976 with up to date ammenments. The Pump suitable for lifting water 100.00 metre head with (+) 10% and (-) 25% head range, Single phase AC supply Motor type UMAI (S) 100 suitable for operation on 220 (+/-) 5% volts 50 cycles / second single phase AC electric supply. The discharge of pump should be 0.90 litre/Sec. at duty point complete as per the satisfaction of Engineer-in-charge with in all leads and lifts.

Total head: 100 mtrs.

Discharge: 2.25 LPS

Providing and fixing of control panel with manufacturing of M.S. Sheet box of suitable as per L&T/Havells/KSB/Crompton/approved specification and having protection of motor on occurance of fault (Triping on occurance of fault i.e. Moisture high motor temperature dry running reverse rotaion, single phasing voltage imbalance, overload and short cricuit) and indiation there of by glowing fault lamp for motor above 30kW another protection of mechanical seal failure shall also be provided in addition to above protection fitted with required accessories as per manufacturer standard practice.

Providing and fixing MS sheet box size (0.60x0.30x0.90mm fabricated with angle iron of four legs mounted in cement concrete 1:3:6 for electric metred starter switch and other accessories with locking arrangement complete.

Providing and fixing of water proof PVC Cable 3 core 2.5 sqmm of Havells/approved make as per IS-674-Part-II-1964 suitable for above pump sets from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge.

Providing and fixing steel wire rope 6mm Thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pum set in bore well including comlete arrangement of fastening etc. complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing of cast iron double flanged non returing valve 65mm dia of Leader/Kirloskar/Kilburn/all approved make PN-1.6 capable of withstanding nominal seat pressure. the non returing valve should be confirming to BIS-1414 with up to date ammendments including cost of nut & bolts and gasket complete in all respect with in all leads and lifts and to entire satisfaction of engineer -in -charge

Providing and fixing M.S. Clamps to hold the pump set in the bore well including required bolt and nuts complete in all respect as per entire satisfaction of Engineer-in-charge.

Testing and water proof connction motor to pannel at site complete in all respect as per entire satisfaction of Engineer-in-charge.

Erection Charges including labour charges, electrical connection , lowering of etc. complete in all respect as per the entire satisfaction of Engineer-in-charge.

Excavation in foundations, trenches etc., in earth work lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres to the entire staisfaction of Engineer-in-charge with in all leads and lifts.

Laying, jointing and testing in trenches of galvanised mild steel of following dia meter, including carriage of pipe and cost of fittings such as tee, elbow, union and nipple etc. of ISI marked and testing for leakage complete with in all leads and as per the direction of Engineer in charge (Earth work in trenches to be measured and paid for seperately)

65mm dia

32mm dia

20mm dia

15mm dia

Providing and placing (at all heights) polyethylee water storage tank ISI:12701 marked indicating the BIS license no. with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes, including all fittings and float valve excluding the base support for tank (Sintex, electroplast, Star, Lotus or equivalent having ISI lience). 2000 lts. capacity