Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹22.9 L+₹37,288.75 (1.66%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹24.2 L+₹1.7 L (7.58%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹22.2 L
EMD Value
₹44,400
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL N K CHAUDHARY
HQ 137 WKS ENGR PIN 914137 CO 99 APO
PROVN OF COVERED SHED FOR PATHWAY NEAR BLDG NO T 190 TO BLDG NO T 187 BCD 185 TO BLDG NO T 181 AT ZAKHAMA MIL STN
2022_MES_550941_1
8688/E8
Open Tender
Civil Works
Item Rate
180 days
ZAKHAMA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) ZAKHAMA
₹44,400
3 Nov 2022
9 Sept 2022
15 Oct 2022
9 Sept 2022
8 Oct 2022
24 Sept 2022
60 days
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base of floor and finished the surface fair and even to receive subsequent layer complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed.
Material and labour for pre-polished machine pressed chequred tiles 25cm x 25cm x 22-25mm thick, in floor, set jointed and pointed in grey cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good disturbed surface in soft / loose soil complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Supply and fixing steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed .
Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- A complete all as specified and as directed.
Supply and fixing mild steel rag or lewis bolts, 25 mm dia screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 30cm long complete all as specified and as directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for preparation of new or previously untreated steel or iron surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.
Removing excavated material to a distance exc 250M but n.exc 500M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .
Supply and fixing sub-main wiring on wall or ceiling with PVC insulated & unsheathed two run of 2.50 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 2.50 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including non metallic rigid PVC conduit of adequate size with all accessories including taking down existing burnt sub main wiring complete all as specified and as directed. (Note : (i) Three runs of 2.50 Sqmm cable and one run of Conduit shall be measured as one unit for payment purpose. (ii) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.)
Supply and laying or passing through pipe 1100 volts grade heavy duty cable with PVC insulated 4 Sqmm twine core alluminium stranded served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire including testing on completion including taking out unserviceable wire complete all as specified and directed.
Supply and fixing PVC rectangular block of size 250 x 200 x 50 mm complete all as specified and directed.
Supply and fixing ceiling rose,and size 65X50mm 3 terminal /PVC/ polycarbonate, isolated body, ISI marked complete all as specified and as directed.
Supply and fixing of surface and wall mounted LED tube light fittings with polycarbonate housing & integrated electronic driver, 1x9 Watt, 600mm long, 230V, 6500K, 950lm including all accessories and connecting to celling rose with twin core 0.75mm flexible copper conductor wire/cable complete all as specified and as directed.
Supply and fixing as in repair MCB-DB SPN 4 ways, 240 volts, double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.
Supply and fixing MCB 6 to 32 Amps, SP, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing as MCB 6 to 32 Amps, SPN, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing as house service bracket (hook type) made up with 3.00 metre long GI pipe 40 mm dia, medium grade including two nos ninety degree bend complete all as specified and as directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Ms ARENKOKLA CONTRUCTION
Shri Atoshe Tuccu
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .