SPL REAPIR TO BLDG NO P-31 TO P-32 (TOILET/BATHROOM BLOCK) IN UNIT AREA AT 810 CETC PURKAZI AND PROVN OF 03 X CAR PARKING AND 06 X MOTOR CYCLE SHED AT CTS BEG AND CENTRE ROORKEE UNDER GE ROORKEE

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius and built in cement mortar 1 : 6 complete all as specified and directed.

Demolition of RCC of any description and in any position complete all as specified and directed.

M & L for precast cement concrete type B-1 (1 : 2 : 4)using 20mm graded stone aggregate in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, including chamfers, weathering, throttling etc and setting in cement mortar 1:6 complete with joints to match set in CM 1:6 complete all as specified and directed.

M & L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 350X 250X 7 mm/ 450x 300 x7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for providing rendering 10 mm thick in CM (1:3) as in ceiling/concrete surface finish even and smooth of any description etc complete all as specified and directed.

M & L for providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for providing 15 mm thick rendering with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including removal to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections, including removal to store complete all as specified and directed.

S&F GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required complete all as specified complete all as specified and directed. .

S&F GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. .

S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (MODEL : TQT - 511, Make : ESSCO, Jaquar Group OR EQUIVALENT RANGE OF MARC, JOHNSON).

S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaquar Group OR EQUIVALENT RANGE OF MARC, JOHNSON).

S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white glazed with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S&F in repair vitreous china urinal, Half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S & F Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed (Model : ALD-CHR-573, Make : Jaquar OR EQUIVALENT RANGE OF MARC, JOHNSON).

S & F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed.

S & F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.

S & F in repairs Grating doom 125 mm dia with or without waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S & F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed .

Taking down shutter of any description exc 1sqm but n exc 2 sqm each including butt hinges complete all as specified and directed.

Framed brackets or angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including suppling & fixing in the frame at site as per specification & drawing

S & F 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S&F 150 mm size Stainless Steel tower bolts of extruded section (ISI Marked) and fixed to shutter complete all as specified and directed.

S&F 150 mm size Stainless Steel handles fabricated type anodised (ISI Marked) complete all as specified and directed.

S&F factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or MS flat complete all as specified and directed.

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate or with cement motor 1:3 complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 75 mm complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 110 mm complete all as specified and directed.

S & F in repairs PVC (SWR) 'T' 110 mm complete all as specified and directed.

S & F in repairs PVC (SWR) 'T' 75 mm complete all as specified and directed.

S&F in repair 110 mm pipe stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron strip including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

M&L 25mm thick PCC type B-0, 1:2:4 (12.5mm graded stone aggregates) as in floor/ roof surface as levelling course complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 mixed with WPC on roof surfaces finished even & smooth without using extra cement including taking down existing roof treatment, tiles and bedding and plaster coat complete all as specified and directed. Note : WPC shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:- (a) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.5 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction.

M & L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Demolition and breaking up drain pipes 150mm Dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying under ground cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) Ty C2 using 40mm graded stone aggregate for 150mm pipe complete all as specified and directed.

M&L for plain cement concrete (1:3:6) ty C-2 using 40mm graded stone aggregate as in foundation in foundations, filling and mass concrete complete all as specified and directed..

M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil complete all as specified and directed.

M&L for PCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for rendering 15mm thick using cement mortar (1:4) on fair faces of brick work or concrete surfaces on wall using water proofing compound. ( WPC will be measured and paid saparatly) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or ground level) complete all as specified and directed.

M&L for providing 75mm PCC 1:4:8 type D-2, (using 40 mm graded stone aggregate) as in sub base of floor, concrete complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm garaded stone aggregate, as in kerbs/stops rounded or chamfered on edges of the interlocking tiles complete all as specified and directed.

M & L for 60mm thick Machine pressed precast concrete interlocking paver block approved shape and size confirming to IS 15658-2006 of 60, with grey cement and pigment, completye all as specified.

Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

Taking up or down 40mm dia steel tubing and connections, including removal to store complete all as specified and directed.

M & L GI tubing ISI marked medium grade 40mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregte) as in floor, hard standing, plinth protection etc, laid in alternate bays n.exc 2.50 Sqm and joints filled with with mastic, filling finished even and smooth without using extra cement complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making surface good in soft / loose soil complete all as specified and directed.

Cement concrete in foundations, filling and mass concrete in type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L MS Steel work in tubular trusses/purline/ column/nut bolts/base plate including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 75mm thick cement concrete (1:2:4) type B- 2,using (40mm graded stone aggregate),finished even and smooth without using extra cement as in floors/hard standing etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power ponts) including fittings and fixtures such as switches, sockets, ceiling rose, pendant, fan regulators etc of any type.

M&L for new point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes with hylam sheet cover glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:3) with all necessary surface finishes such as distempering etc to match the existing surfaces complete all as specified for the following:- One light point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

All as per item No 86 here-in-before but One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

All as per item No 86 here-in-before but One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 86 here-in-before but One exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

All as per item No 86 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz complete all as specified and directed.

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed.

S&F angle holder PVC/ polycarbonate type with back plate fixing on sunmica/hylim plastic laminated round sheet suitable for fixing of LED bulb complete all as specified and directed by Engr-in-Charge.

S & F LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 850 suitable for "B-22 type to fix on batten holder complete all as specified and directed.

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix in replacement of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar of 200 Amp rating, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 63 Amp, 10 KA, TPN, 'C' curve, 415 V, 50 Hz with 200 amp copper busbar including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 63 Amp, 10 KA, TP, 'C' curve, 415 V, 50 Hz with 200 amp copper busbar including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 4 way with 200 Amps rated busbar all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix in replacement of old unserviceable LED T-5 tube light fitting 20 watts with aluminium housing and polycarbonate diffuser with integrated electronic driver with all accessories including tube rod and connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

Supply and fix LED 25 watt Building security light fitting with suitable lamp mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

Taking down old unserviceable sub main wiring of any description with conduit and accessories and S&F new sub main wiring with two runs of 4.0 Sqmm 1100 Volt grade single core PVC insulated and unsheathed (FRLS) LT cable having multi stranded copper conductor, drawn through and including PVC non metallic conduit of 20mm / appropriate dia with all accessories and one run of 4.0 Sqmm 1100 Volt grade single core PVC insulated and unsheathed (FRLS) LT cable having multi stranded copper conductor complete all as specified and directed by Engineer-in-Charge. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

S&F Exhaust fan Steel body AC single phase 230/240 Volt copper winding of size 300 mm sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed . Note: Old exhaust fan to be deposited in MES store yard Roorkee.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. (earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dimension of 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI earth electrode 25mmx4mm upto 7.5 mtrs long with 40 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI strip more than 7.5 mtrs as per site requirement shall also be included in quoted rates.

Supplying, laying, jointing and testing LT underground cable of size 16 Sqmm 4 core, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protectedas directed of suitable size all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends, including taking up of old existing cable, complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items.

M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed. Note : The thickness after punning shall only be measured for payment.

M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed. Note : Average 8 bricks per limit of cable protection shall be measured for payment.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

Supply and lay GI medium grade pipe for cable protection of size 40 mm dia complete all as specified and directed

Taking up or down galvanised steel tubing 25 mm bore and connections of any size and type complete all as specified and directed.

Supply and fix galvanised steel water tubing 25 mm bore medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor/trenchescomplete all as specified and directed.

Supply and fix or lay in trenches galvanised steel water tubing 25mm both medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall and ceiling complete all as specified and directed

Cutting existing CI/GI water mains 40/50 mm bore (in position) for branch connection of the internal dia of 25 mm complete all as specified and directed.

M&L for screwing existing steel tubing for alteration or additions by inserting Tee 40/50 x 25mm complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 25 mm bore complete all as specified and directed.

KISHORE CHAND DINESH CHAND

VINAYAK CONSTRUCTION COMPANY

IRFANAHMAD CONTRACTOR

M R CONSTRUCTIONS

ANEJA AND COMPANY

M/S GIRI CONSTRUCTION CO.

AMARJEET SINGH AND CO.