Loading
Loading…
Loading…
Tender Value
₹40.1 L
EMD Value
₹80,100
Closing Date
7 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
12 conditions · 1 needing a document upload
Electrical License: The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected. Note: In case of expiry of validity of license during contract, the contractor should renew the license so that it is always valid during contract.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
1)Proposed interlocking of LC 155 at km. 901/6-7 between Bolda - Sirli station in PAU-AK section in Nanded Division- Electrical Arrangements. 2)Proposed interlocking of LC No. 33 between ADB-PMKT and LC 74 between BDU-Jalna stations over Nanded Division- Electrical Arrangements.
NED-E-05-2026-27
NED-E-05-2026-27
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹80,100
7 Jul 2026
15 Jun 2026
23 Jun 2026
184 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 16,13,897 | ||
| — | 18.00 | — | — | ||
| — | — | — | 7,452 | ||
| — | Supply Make:Havells/Syska/Crompton/Bajaj/Surya/or | and fixing of similar | — | ||
| — | — | — | Light | ||
| — | 4.00 | — | — | ||
| Supply and fixing of 28W 1200mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including labor charges. Make:Havells/ CG/Bajaj/Orient/Atomberg or similar | — | — | — | 10,616 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Ventilating Fans (Exhaust fan) of 4 pole 300 mm sweep size with metallic body with capacitor conforming to IS No.2312/67 (Reaffirmed 2005) complete with louver and all connected accessories. Make: Havells/CG/Bajaj/ Khaitan or similar | — | — | — | 4,852 | |
| — | 4.00 | — | — | ||
| Providing & erecting 5 m high (clear height) galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification | — | — | — | 56,148 | |
| — | 4.00 | — | — | ||
| Providing & casting of M-20 grade reinforced cement concrete (RCC) foundation suitable for 3m to 5m high octagonal/conical G.I.pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5m depth including supply of steel,concrete,excavation and fixing provided nut bolts with the help of template as per design in an approved manner. | — | — | — | 13,216 | |
| — | 4.00 | — | — | ||
| Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia 'B' class G.I. pipe 1.0 min length along with pole cap of 300 mm length 100 mm dia duly welded as per specification | — | — | — | 3,504 | |
| — | 4.00 | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octagonal pole by means of PVC insulated copper conductor of 3 core 1.5 sq mm with necessary lugs at the junction box and necessary termination at the lumaninaire complete | — | — | — | 1,604 | |
| — | 11.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the background in an approved manner. Make: Legrand/ Havells/GM/Indoasian or similar | — | — | — | 3,586 | |
| — | 14.00 | — | — | ||
| Supply and erection of modular type 3 pin 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/GM/Indoasian or similar | — | — | — | 2,534 | |
| — | 14.00 | — | — | ||
| Supply and erection of modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/GM/Indoasian or similar | — | — | — | 1,442 | |
| — | 9.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/Indoasian or similar | — | — | — | 1,233 | |
| — | 9.00 | — | — | ||
| Supply and erection modular type switch 6/10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/ GM/Indoasian or similar | — | — | — | 477 | |
| — | 2.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2 mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Make:Legrand/Havells/L&T/INDOASIAN or similar | — | — | — | 3,454 | |
| — | 8.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCBMake: Legrand/Havells/ L&T//INDOASIAN or similar | — | — | — | 4,360 | |
| — | 160.00 | — | — | ||
| Supply and laying of ISI marked 4 core 16 sqmm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed,armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part-1)/1988 with amdt. no.1,2 & 3 (reaffirmed 2005) or latest.Make: Havells/Finolex/Polycab/Finecab or similar | — | — | — | 23,520 | |
| — | 400.00 | — | — | ||
| Excavation of cable trench 30 cm widex90cm deep in all types of soils for HT/LTUG cable as per specification No.Y/E.cable laying/6/99 annexed. | — | — | — | 54,000 | |
| — | 600.00 | — | — | ||
| Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30 cm wide x 90cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 1,34,400 | |
| — | 20.00 | — | — | ||
| Supply of 50 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/ building including laying of cable through GI pipe. | — | — | — | 10,220 | |
| — | 20.00 | — | — | ||
| Horizontal drilling of bores for laying of LT UG cables across the road/track | — | — | — | 41,000 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of 60 &150 CLS junction box as per the drawing No: 01/2022-4/2/AT, Dated: 11/03/2022 or latest. | — | — | — | 12,186 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 63A 4 pole MCCBs with 25 KA breaking capacity (for AT terminal box as per Drawing enclosed | — | — | — | 4,630 | |
| — | 1.00 | — | — | ||
| Supply, fixing and connecting and commissioning of Weather proof terminal box with Bimetallic bus bar with clamp bolts nuts including all accessories etc.(For 25KVA & 10KVA AT) As per DRG No:E.252/TrD/HQ/AT-JB/2022-23 (Alt-1) , Dated:22/11/2023 or latest | — | — | — | 13,770 | |
| — | 6.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification. | — | — | — | 24,246 | |
| — | 2000.00 | — | — | ||
| "Supply, erecting and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 63mm (nearest 2"" dia) and wall thickness minimum 2.5 mm maximum 2.8 mm with ""T' joints, bends, elbows etc. including all other connected accessories. Make: M/s.Sudhakar/ Nagarjuna polymer/ Nandi/ Plasto/Narmada Polymer or similar | — | — | — | 2,64,000 | |
| — | 2160.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 25,920 | |
| — | 1.00 | — | — | ||
| Supplying and erecting programmable digital almanac timer micro controller based with real time clock to operate on derived switching-ON & switching-OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output230 V/10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner. | — | — | — | 5,888 | |
| — | 3.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.Make: Legrand/Havells/GM or similar | — | — | — | 1,548 | |
| — | 1.00 | — | — | ||
| Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for out going SP/TP MCB's on iron frame/laminated board as per specification No. SW-SWR/MCBDB Make: Legrand/Havells/L&T or similar | — | — | — | 2,673 | |
| — | 2.00 | — | — | ||
| Supply, erection and marking TPN MCB63A, 10 kA C-series in provided distribution board as per specification No.SW-SWR/MCB Make: Legrand/Havells/L&T or similar | — | — | — | 2,970 | |
| — | 5.00 | — | — | ||
| Supply of 60 W LED Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc | — | — | — | 13,550 | |
| — | 5.00 | — | — | ||
| Erection,connecting, testing and commissioning of 60 W LED Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc | — | — | — | 500 | |
| — | 2.00 | — | — | ||
| Supply of 100W LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc | — | — | — | 7,738 | |
| — | 2.00 | — | — | ||
| Erection, connecting,testing and commissioning of 100W LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc | — | — | — | 172 | |
| — | 26.00 | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq,mm 1100 Volts and one run of flexible copper conductor 1.5 Sq,mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)(up to 10 meters) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service building points etc. accessories. | — | — | — | 17,472 | |
| — | 90.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 1554-part 1. | — | — | — | 9,180 | |
| — | 140.00 | — | — | ||
| Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 1554-part | — | — | — | 21,560 | |
| — | 80.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe. | — | — | — | 14,480 | |
| — | 320.00 | — | — | ||
| Supply and concealed laying of 25 mm dia 2mm thick PVC pipe (ISI MARK) heavy mechanical stress FRLS with all required accessories including masonry work (chipping etc.) and labour charges etc. | — | — | — | 11,840 | |
| — | 160.00 | — | — | ||
| — | 4.00 | — | — | ||
| — | 3.00 | — | — | ||
| — | 2.00 | — | — | ||
| — | — | — | 460 | ||
| — | 2.00 | — | — | ||
| — | — | — | 9,240 | ||
| — | 200.00 | — | — | ||
| — | — | — | 86,600 | ||
| — | 1800.00 | — | — | ||
| — | — | — | 6,12,000 | ||
| — | 1.00 | — | — | ||
| — | — | — | 43,890 | ||
| — | — | — | 23,91,160 | ||
| — | 36.00 | — | — | ||
| — | — | — | 13,644 | ||
| — | Supply Make:Havells/Syska/Crompton/Bajaj/Surya/or | and fixing of similar | — | ||
| — | — | — | Light | ||
| — | 8.00 | — | — | ||
| Supply and fixing of 28W 1200mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including labor charges. Make:Havells/ CG/Bajaj/Orient/Atomberg or similar | — | — | — | 19,424 | |
| — | 4.00 | — | — | ||
| Supply and fixing of Ventilating Fans (Exhaust fan) of 4 pole 300 mm sweep size with metallic body with capacitor conforming to IS No.2312/67 (Reaffirmed 2005) complete with louver and all connected accessories. Make: Havells/CG/Bajaj/ Khaitan or similar | — | — | — | 8,880 | |
| — | 8.00 | — | — | ||
| Providing & erecting 5 m high (clear height) galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification | — | — | — | 1,02,752 | |
| — | 8.00 | — | — | ||
| Providing & casting of M-20 grade reinforced cement concrete (RCC) foundation suitable for 3m to 5m high octagonal/conical G.I.pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5m depth including supply of steel,concrete,excavation and fixing provided nut bolts with the help of template as per design in an approved manner. | — | — | — | 24,184 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlips1to11_compressed.pdf
ATTACHMENT
TenderNoNEDE05LCNo1553374.pdf
ATTACHMENT
Earth Pit Specification
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .