LAYING OF SHUNT LINE PARALLEL LINE IN PLACE OF OLD DETORATED CUM DAMAGED PIPELINE BY WAY OF LAYING NEW LINE FROM SEMPORA ZAFRON COLONY BALHAMA (UNDER DISTRICT CAPEX).

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil :

ii. Ordinary Rock

Supply, laying and fitting in position centrifugally Ductile Iron, S&S or flanged pipes (ISI marked) as per IS:8329/2000 read with upto date amendments from registered / Gem approved manufactures holding valid BIS licenses including all types of carriages / pipe specials (required for the job) complete. i. 150mm dia (K-7)

ii. 100mm dia (K-7)

iii. 80mm dia (K-7)

Providing, Laying and fitting of G.I. Pipes complete including cost of standard quality B grade pipes, white lead, hemp, oil etc. but excluding cost of earth work. This item also includes all types of pipe specials and carriage, required for successful commissioning of pipe lines. i. 40 mm dia G.I. Pipes.

Providing, fixing of MS flanges made out of 12mm thick Mild Steel, including cost of nuts and bolts, R.I. Cloth, Rubber Washers and cutting and threading. This item also includes all types of carriage and laying and fitting of pipes Complete Job. (Flanges will be used only if all other measures failed, to be certified by AEE Concerned). i. 40mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50Mtrs and lift upto 1.5m.

Providing, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm thick plate as per the requirement of site. This item includes cost of lead, spun yarn and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and bituminous paint and including all carriages, leads lifts, etc. complete. (The quantities are approximate and may vary as per the profile and as per the site conditions.)

Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. i. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Shifting of connection from old mains to new pipe main and sub main including welding s per ground profile and pipe specials required for the job. i. 15mm dia

ii. 20mm dia

iii. Above 40mm dia

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : i. Above 40 mm nominal bore

ii. 15 mm to 40 mm nominal bore.

Providing and fixing of Sluice Valves of Kirloskar/VAG/Talis approved branded quality confirmation ISI Codes. 1.6 rating, including all types of carriages. i. 100mm dia

ii. 80mm dia

iii. 65mm dia

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: i. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fixing of DI Pipe specials including all carriages upto site of work including cost of Gasket. i. 150mm dia DI bend

ii. 150mm x 100mm dia reducer

iii. 100x100x80mm dia Tee

iv. 100x80mm dia reducer

v. Tail piece 100mm dia male

vi. Tail piece 100mm dia female.

Carriage of material from source upto site of work by mechanical transport including loading, unloading and stacking. i. 20mm Aggregate for an avg. lead of 20Kms.

ii. Sand for an avg. lead of 10Kms.

GULAM MOHI- UD- SHAGOO