Lifiting Lowering of submersible Pump Motor Set of 15(fifteen) nos DTW/MDTW schemes within the Jurisdiction of Jhargram-I(AI) Sub-Division under Executive Engineer(AI), Jhargra(AI) Division Jhargram under NonPlan

Withdrawal of electro motor submersible pumping set of following capacities from within the tubewell housing pipe of the following length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete. (a) 100/150/200 cubic metre per hour capacity electro motor pumping set. (ii) Length of pump assembly of any length exceeding 18 metre length.

Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set). From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work. (A). Carriage by road . (a) Distance upto 50 km. (i)

Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set). From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work. (b) Additional distance for each 25 km. beyond 50 km. upto any distance. From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work.

Instalation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) (a) 100/150/200 cubic metre per hour capacity electro motor pumping set. (ii) Length of pump assembly of any length exceeding 18 metre length.

Charges for prepairing continuity test, insulation test by Megger no load test as per direction of Engineer-in-Charge.

Charge for joining water proof cable with required water proof insulation and proper jointing compound including supplying other related materials complete.

GST as applicable @ 18%

Labour welfare cess @ 1.00%