RESTORATION TO DIFFERENT TYPES OF CHAIRS INCLUDING CANNING, PAINTING AND POLISHING UNDER GE (EAST) MATHURA

Amount

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. Note :- (a) For all items of BOQ viz 1.01 to 17.20. (b) Work shall be executed where the furniture exist in different User Units under AOR of GE (East) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

CHAIR DINING ,FD-279,262,228,FD/MAP-II/05

S&F in repair back rest all as drawing.

S&F in repair leg stiffener all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rear leg all as drawing.

S&F in repair rail all as drawing.

Removing the existing unserviceable cane plastic from the chair dining, tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. Note:- French polishing shall be measured & paid separately under item No 1.09 of BOQ.

Removing the existing unserviceable/broken PVC seat from the chair and supply and fixing new PVC seat 4mm thick after providing sufficient corner support and one additional stiffener at centre for support of PVC seat.The PVC seat shall be fixed with proper screws and good workmanship.Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make the upper surface smooth and tidy. The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/COMFO/HARMONY

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR EASY,FD-229, 358, 1108

S&F in repair rear leg all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rail seat all as drawing.

S&F in repair stiffener all as drawing.

S&F in repair back rest all as drawing.

S&F in repair arm all as drawing.

Removing the existing unserviceable cane plastic from the chair easy,tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. Note: French polishing shall be measured & paid separately under item No 2.08 of BOQ

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR WRITING,FD-261, 280, 250, 1107

S&F in repair back rest all as drawing.

S&F in repair leg stiffener all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rear leg all as drawing.

S&F in repair rails all as drawing.

S&F in repair arm all as drawing.

Removing the existing unserviceable cane plastic from the chair writing,tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. Note:-French polishing shall be measured & paid separately under item No 3.08 of BOQ.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact as applicable as per drgs. CHAIR VERANDAH:-, FD-19M,256,359,259,FD/ MAP-II/06

Spot gas welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and recanning the chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern The canning of chairs shall only be carried out after complete painting process as specified as specified in drg. MAKE OF CANE- SHAH,PREMIER Note:- Painting shall be measured & paid separately under item No 4.05 of BOQ.

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/COMFO/HARMONY

M&L for painting the frame of the chairs by applying one coat of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth complete all specified.

Removal of following existing unserviceable old broken wooden/ply components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR WOODEN BOTTOM W/O ARMS FD-56/225

S&F in repair back rest all as drawing.

S&F in repair leg stiffener all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rear leg all as drawing.

S&F in repair rail all as drawing.

Removing the existing unserviceable/broken seat of chair without disturbing the adjacent parts ,supply and fixing 6 mm thick commercial ply for seat of chair with standard workmanship.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken wooden/ply wood components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion, as applicable as per drgs. CHAIR DINING CUSHIONED FOR OFFRS, FD/E6/MAP/10

S&F in repair back rest all as drawing.

S&F in repair teak wood vertical stiffener all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rear leg all as drawing.

S&F in repair stiffener all as drawing.

"L" bracket 04 nos in each chair of size 75mmx75mm shall be fixed to rail and leg for making the chair more strudy and durable.

Supply of seat made of 12mm thick BWR plywood over 40 density cool foam 75mm thick shall be provided duly covered with best quality tapestry cloth not less than ` 200/- per RM as approved by BSO/GE.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish "L" bracket size 75mmx75mm shall be fixed at right angle of legs and rails complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable old broken components (Seat and back) of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR EASY CUSHIONED:- FD-358

S&F in repair back rest all as drawing.

S&F in repair front leg all as drawing.

S&F in repair rear leg all as drawing.

S&F in repair arm all as drawing.

S&F in repair seat made of 12mm thick plywood over which 40 density cool foam, 75mm thick shall be provided duly covered with best quality tapestry cloth not less than ` 200/- RM as shown on drg and fixed on top of side rails by screws. All as directed by BSO

S&F in repair back made of 12mm thick plywood over which 40 density cool foam, 75mm thick shall be provided duly covered with best quality tapestry cloth not less than ` 200/- RM as shown on drg and fixed on top of back rails by screws. All as directed by BSO

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable old broken components seat and back of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR STEEL TUBULAR WITH ARMS : FD-75(M)

M&L for applying one coat of synthetic enamel olive green paint after preparation of steel surface by removing the old paint with sand emery paper complete all as specified and as directed by Engr-in-Charge

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat alongwith supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm.

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

S&F in repair hard wood arm rest as per drg

S&F in repair hard rubber shoes as per drg

S&F in repair rubber cap for conduit pipe as per drg

Removal of following existing unserviceable old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR STEEL TUBULAR WITHOUT ARMS : FD-75(M)

S&F in repair hard rubber shoes as per drg

S&F in repair rubber cap for conduit pipe as per drg

M&L for applying one coat of synthetic enamel olive green paint after preparation of steeel surface complete all as specified and as directed by Engr-in-Charge

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removal of following existing unserviceable steel/cane/old broken wooden components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR CB STEEL PADDED WITH ARMS, FD-75(M)

M&L for applying one coat of synthetic enamel olive green colour after preparation of steel surface complete all as specified and as directed by Engr-in-Charge.

S&F in repair seat of the chair made out of 12mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 100mm foam cushion and overwhich best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. The seat shall be fixed in between the frame with nut bolts and washers.

S&F in repair back of the chair made out of 6mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 50mm foam and over which best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. The seat shall be fixed in between the frame with nut bolts and washers.

S&F in repair arm of the chair made out of 25mm thick teak wood in the shape of the arm.The arm shall be covered with 50mm foam and over which best quality tapestry cloth shall not be less than ` 200/- RM as directed by Engr-In –Charge. The arm shall be fixed over the conduit pipe and to be screwed from below.

S&F in repair hard rubber shoes as per drg

Removal of following existing unserviceable components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR EASY STEEL, FD-121(M)

Continuous Gas welding as required per 10 CM.

S&F in repair seat made of 12mm plywood over which 75 mm foam cushion of 40 density shall be fixed with adhesive. The foam and plywood shall also be covered with best quality tapestry cloth shall not be less than ` 200/- per RM as approved by BSO and GE irrespective of what is shown on drg. The complete seat shall also be tightening on seat frame with 08 screws.

S&F in repair timber arm rest as per drg

S&F in repair shoes all as per drg

S&F in repair back made of 12mm plywood over which 75 mm foam cushion of 40 density shall be fixed with adhesive. The foam and plywood shall also be covered with best quality tapestry cloth not less than ` 200/- per RM as approved by BSO and GE, irrespective of what is shown on drg. The complete back shall also be tightening on back frame with 04 screws.

M&L for applying of one coat of synthetic enamel black color on all steel portion of form including arms, complete all as specified and directed.

Removal of following existing unserviceable broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR WRITING, FD/E6/MAP/12

S&F in repair seat & back of Chair writing made of 12 mm thick hot pressed plywood upholstered with fabric not less than ` 200/- per RM and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

M&L for applying one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge.

S&F in repair arm rest of chair writing officer and made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

S&F in repair rubber stopper of the chairs all as directed and specified by Engr -in -charge

Removal of following existing unserviceable broken components of furniture items or similar item, as applicable as per drgs. CHAIR COMPUTER, FD/E6/MAP/01

S&F in repair seat & back of Chair computer made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

S&F in repair arm rest of chair computer made of black integral skin polyurethane with 75-85 shore 'Á' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable base along with castor twin wheels and S&F new base along with new castor twin wheel suitable for chair computer all as directed by Engr-in-charge.

Removing unserviceable adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed by Engr -in charge.

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR SCHOOL WITH HAND BOARD, FD/E6/MAP/05

M&L for applying one coat of synthetic enamel grey colour including preparation of steel surface complete all as specified and as directed by Engr-in-Charge.

S&F in repair one piece PVC seat and back and fixing the same by providing four screws as described in drg. Make of Seat :- Blow plast/Nilkamal/supreme

S&F in repair 18mm thick prelaminated particle board top open able/hand board with 4mm thick teak wood edging and fixing the same by providing hinges/screws as described in drg

S&F in repair hard rubber shoes as per drg

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR REVOLVING EXECUTIVE (LOW AND HIGH BACK)/CHAIR CONFERENCE TP & FD/E6/MAP/01

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick of 40 density and fabric of cost not less than ` 200/- per RM over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair all as approved by Engr-in-charge.

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly (Complete Base) along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly (complete base) along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of five wheel coasters for smooth running of chairs and shall have gas lift mechanism.

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR WRITING STEEL, FD-360

Continuous Gas welding as required per 10 CM.

S&F in repair seat made of 12mm plywood over which 100 mm foam having density not less than 40, cushion shall be fixed with adhesive. The foam and plywood shall also be covered with best quality tapestry cloth shall not be less than ` 200/- RM as approved by GE irrespective of what is shown on drg.The complete seat shall also be tighten on seat frame with 08 brass screws.

S&F in repair timber arm rest as per drg

S&F in repair back made of 12mm plywood over which 75 mm foam cushion shall be fixed with adhesive. The foam and plywood shall also be covered with best quality tapestry cloth as approved by BSO and GE, irrespective of what is shown on drg.The complete back shall also be tighten on back frame with 04 brass screws.

M&L for applying of one coat of synthetic enamel black color on all steel portion including preparation of steel surface of form including arms, complete all as specified and directed.

M&L for French polishing one coat to the following furniture articles all are of MES pattern or Similar items incl applying wax for depressed surface before polishing/painting all as specified and shown on drgs and directed by Engineer-in-Charge.Work will be executed where the furniture exist in Officers Married accn including OTM Accn and in different User Units under the jurisdiction of GE (E) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

Drg No FD-264, Bed hard

Drg No FD-245, Bed Niwar with MNF Set

Drg No FD-279, Chair dining

Drg No FD-229, Chair easy

Drg No FD-280, Chair writing

Drg No FD-233, Hat stand with mirror

Drg No FD-236, Peg Table

Drg No FD-281, Sofa set (4 seater cushioned)

Drg No FD-281, Sofa set (5 seater cushioned)

Drg No FD-282, Stool dressing

Drg No FD-248, Table bed side

Drg No FD-274, Table centre

Drg No FD-273, Table Dining 6 persons

Drg No FD-273, Table Dining 8 persons

Drg No FD-230, Table Dressing Gents

Drg No FD-378, Table Dressing ladies

Drg No FD-249, Table Writing

Drg No FD-232, Teapoy

Drg No FD-255, Teapoy Verandah

Drg No FD/E6/MAP/15(R), Table bed side

M&L for applying one coat of synthetic enamel paint to the following furniture articles including preparation of steel sruface all are of MES pattern or Similar items all as specified and shown on drgs and directed by Engineer-in-Charge. Work will be executed where the furniture exist in Officers Married accn including OTM Accn and in different User Units under the jurisdiction of GE (E) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

Drg No FD-1029, Locker Bed Side Steel

Drg No FD-256, Chair Verandah

Drg No FD/E6/MAP/18, Almirah large steel

Drg No FD-1032, Almirah Steel medium

Drg No FD/E6/MAP/02(R), Rack shoe steel

Drg No FD/E6/MAP/15(R), Table bed side

ANUBHAV BUILDERS

ms Jyoti traders

HINDUSTAN ENGINEERING WORKS