Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹67.6 L
EMD Value
₹1.6 L
Closing Date
2 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Project Manager, Ghaziabad
UP State Bridge Corporation Ltd, F-Block, New Kavi Nagar, Ghaziabad (UP) 201001
Construction Of Bridge Over River Hindon Between Sector Knowledge Park 03 Greater Noida and Noida Sector 146 and 147 In Distt Gautam Buddh Nagar -Bituminous and Mastic Work
2025_UPSBC_1100463_1
3351/30ET/CPM/GHAZIBAD/2025-26
Open Tender
Civil Works - Bridges
Percentage
30 days
Gr Noida Sector 146 and 147 In GB Nagar
Please refer Tender documents
8 documents required · 8 mandatory
₹5,900
As per Tender Documents
₹1.6 L
2 Jan 2026
20 Dec 2025
2 Jan 2026
20 Dec 2025
2 Jan 2026
20 Dec 2025
(Bituminous & Mastic Work)
Providing and Applying Tack Coat with Bitumen Emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared Concrete surface cleaned with mechanical broom. as per MORTH Specification No. 5.2
Providing and Laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. as per MORTH Specification No. 5.8
Providing and Laying 25 mm Thick Mastic Asphalt Wearing Course with Paving Grade Bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515. as per MORTH Specification No. 5.14
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.10 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
Tender_Document_Bituminus_Mastic.pdf
Tender Documents • 12.85 MB
BOQ_2027830.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .