REPAIR/MAINT OF PAINTING TO RUNWAY,TAXI TRACK , DTGM, RUNWAY MARKING SIGN BOARDS AND MISC WORK AT AF STN BAMRAULI

Amount

M&L for preparation of old painted bituminous surfaces of runway/road for painting lines, dashes, arrows, letters and the like exceeding 10cm wide or girth and applying one coat of runway road marking paint golden yellow, black or white aqua based to give uniform finish complete all as specified and directed.

M&L for preparation of old painted bituminous surfaces of runway/road for painting lines, dashes, arrows, letters and the like not exceeding 10cm wide or girth and applying one coat of runway road marking paint golden yellow or white aqua based to give uniform finish complete all as specified and directed

M&L for preparation of old painted concrete surfaces of runway slab / taxi track/dispersal for painting lines, dashes arrows letters and the like exceeding 10cm wide and applying one coat of runway marking paint golden yellow, black or white aqua based to give uniform finish complete all as specified and directed.

M&L for preparation of old painted concrete surfaces of runway slab / taxi track/dispersal for painting lines, dashes arrows letters (FOD marking) and the like not exceeding 10cm wide and applying one coat of runway marking paint orange aqua based to give uniform finish complete all as specified and directed.

M&L for preparing of old bituminous/ concrete surfaces of runway / taxi track and applying two coats of white wash complete all as specified and directed.

M&L for preparation of previously untreated bituminous surfaces of runway, road painting lines, dashes, arrows, letters and the like exceeding 10cm width or girth and applying two coats enamel paint over one coat priming paint of runway marking, paint of approved make of white or golden yellow black etc complete all as specified and directed.

M&L for preparation of previously untreated bituminous surfaces of runway, road painting lines, dashes, arrows, letters and the like not exceeding 10cm width or girth and applying two coats enamel paint over one copriming paint of runway marking, paint of approved make of white or golden yellow black etc complete all as specified and directed.

M&L for complete removal of old paint on bitumen/ concrete/ PU flooring surface by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth all as specified and as directed

M&L for retro-reflective sheet / tape for sign boards (800 x 800mm) installed in airfield area consisting background with black reflective sheet and golden yellow colour alphabet letter (10 cm width and 300 mm height), 25 mm thick border and one Arrow (300 mm long and 100 mm wide ) complete on both side of boards complete all as specified and directed.

M&L for one coat of black synthetic enamel paint on three sides of DTGM (1.20 x 1.50 mtr) installed in airfield area consisting background with black synthetic enamel paint and red colour retro reflective tape numerical / alphabet letter (150 mm width and 1000 mm height) on two sides complete all as specified and directed.

S&F powder coated aluminium anodized luminous signage board type - 1 size 2900mm x 900 mm x 180mm as per shown on drawing No GE (AF)/BAM/2023/01 dated 12 Jul 2023 att with mandatory/information etc complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium anodized luminous signage board type - 2 size 700mm x 700 mm x 180mm as per shown on drawing No GE (AF)/BAM/2023/01 dated 12 Jul 2023 att with mandatory/information etc complete all as specified and directed by Engr-in-Charge.

S&F LED’s Strips of 0.5 W or equivalent assembled on each PCB of minimum size 700mm x 20mm x 2mm Efficiency of LED shall have delivered minimum output 80 lumens per watt and colour temperature should be more than 5000 Kelvin with proper heat dissipation, should be operationable on series circuit at varriable current from 2.8 Amp - 6.6 Amp (brightness of the signage should be constant with current vairiation) including supply and installation of suitable capacity/ wattage electronic converters and isolating transformers etc all as specified and directed by Engr-in-Charge

S&F LED’s Strips of 0.5 W or equivalent assembled on each PCB of minimum size 500mm x 20mm x 2mm Efficiency of LED shall have delivered minimum output 80 lumens per watt and colour temperature should be more than 5000 Kelvin with proper heat dissipation, should be operationable on series circuit at varriable current from 2.8 Amp - 6.6 Amp (brightness of the signage should be constant with current vairiation) including supply and installation of suitable capacity/ wattage electronic converters and isolating transformers etc all as specified and directed by Engr-in-Charge

S&F 6.6/6.6 Amps, 5 kV grade 50 Hz isolating transformers, 200 watts encapsulated in black crosslinked polychloroprene compound like TPE / TPR/TPV with primary and secondary connections complete all as specified and directed by Engr-in-Charge

S&F 20mm dia conduit pipe wiring on concrete base and fixing with screw all as specified and directed by Engr-in-Charge

S&F 2.5 Sq.mm copper cable pvc insulated with necessary fixing accessary etc all as specified and directed by Engr-in-Charge

SUBASH MAHAJAN

Agrawal Enterprises

R.K.ASSOCIATES

DKS ENGINEERING WORKS

A S ENTERPRISES