Loading…
Loading…
Tender Value
₹24.4 L
EMD Value
₹48,879
Closing Date
3 Sept 2026, 4:00 pm
Cheif Executive Officer, SJDA
Near Passport Seva Laghu Kendra, Himanchal Vihar, Matigara, Pin 734010
Electrification work for Bus Stand at Truck Terminus, Paribahan Nagar, Matigara, Dist. Darjeeling
2026_SJDA_1038736_1
NIT NO. 041/ ENGG/ ELECT/ 2026-27 OF SJDA
Open Tender
Electrical Work/ Equipment
Percentage
90 days
Matigara
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹48,879
Yes
19 Aug 2026
19 Aug 2026
7 Sept 2026
19 Aug 2026
3 Sept 2026
19 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | 37.8 | M3 | 2,434.25 | ₹92,014.65 |
| 2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from
natural sources : 6 graded stone aggregate 20 mm nominal
size derived from natural sources) | 37.8 | M3 | 7,294.7 | ₹2,75,739.66 |
| 3 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | 240 | KG | 238.35 | ₹57,204 |
| 4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes | 600 | MT | 563.05 | ₹3,37,830 |
| 5 | Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos.
firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). | 1.35 | M2 | 20,220.78 | ₹27,298.05 |
| 6 | Supplying and fixing of 26300lm + 5% LED flood light fitting with secondary optics with lens made in pressure die cast housing with heat sink & aluminium extrusion and front glass IP66 protection with Silicon gel Potted Driver, Road Way Luminarie with BIS 'R' Mark along with 5 KV inbuilt surge Protection. CHIP Make : CREE / NICHIA / LUMILEDS / OSRAM / SEOUL. (Make: PHILLIPS. Cat no. : BVP483 LED263 CW SWB PSU GR SPD or Equivalent model of Surya / Bajaj /Panasonic / Crompton ), conforming to Technical Specification and latest accreditation. LM-79 and LM-80 report to be provided conforming to latest NABL accreditation. LED should be warranty for 3 years including dismantling the old damaged fittings & suppying, laying 0.85 mtr. 1.1 KV grade 3 core 1.5 Sq. mm PVC insulated FR PVC sheathed multistranded cable for connection etc as required. | 20 | EACH | 22,535 | ₹4,50,700 |
| 7 | Dismantling and refixing of defective 30m high mast along with double drum winch, with all accessories from its position by using Crabe/ Hydra van. | 1 | EACH | 13,844.6 | ₹13,844.6 |
| 8 | Supplying and Fixing of self sustaining Double Drum Winch, Power Tool and Pully Arrangement having following specification :- Capacity: 750 Kg, Reduction Ratio: 53:1 pully Arrangement for Steel Rope: 3 Sets, Pully Arrangement for Electric Cable: 1 Set | 1 | EACH | 73,502.27 | ₹73,502.27 |
| 9 | Supplying and Fixing 2.0 HP Three Phase Induction Motor, Single Speed with reversible of speed : 1400 RPM | 1 | EACH | 9,397.55 | ₹9,397.55 |
| 10 | Supplying and Fixing Non Corrodible Stainless Steel of 6mm dia Marine Grade of 7/19 construction of AISI Grade: 316 grade with thimble arrangement, buffer arrangement, compensating disc, safety disc, safety lock as required. | 200 | MTR. | 109.08 | ₹21,816 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.01 MB
Form_No_2911.pdf
Additional Documents • 0.50 MB
BOQ_2551562.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].