COMPREHENSIVE MAINTENANCE AND REPAIR IN THE AOR OF POCKET NO. 14 UNDER GE (A) JAISALMER AT MIL STN JAISALMER

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-charge.

Supply and fixing pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed by Engineer-in-charge.

Supply and fixing pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-charge.

S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Engineer-in-charge.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and directed by Engineer-in-charge.

Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.

M&L for second class hardwood glazed and skelton shutters 35mm thick, as in doors, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.

S & F Butt Hinges medium weight cold rolled mild steel, bearing ISI mark, 100 mm long complete all as specified and directed by Engineer-in-charge.

S & F aluminum anodised bow handle, bearing ISI mark, fabricated type extruded section of 150mm long complete all as specified and directed by Engineer-in-charge.

S & F aluminum anodised barrel tower bolts, bearing ISI mark, of extruded section 150mm long complete all as specified and directed by Engineer-in-charge.

S & F Aluminum aodised sliding door bolts, bearing ISI mark, 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.

S & F 150 mm over all length of cover plate of floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-charge.

M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and directed by Engineer-in-charge.

Taking down aluminium door/ windows incl frames and complete fittings of area exc 1.00 sqm but n. exc 4 sqm complete all as specified and directed by Engineer-in-charge.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge. Note :- Minimum thickness of powder coating 50 micron.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-charge. Note:- Minimum thickness of powder coating 50 micron.

S&F providing and fixing factory made aluminium casement windows powder coated sliding type three track of any AC/ Coolar opening provn without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engineer-in-charge.

S&F 5mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

S&F Powder coated extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 5mm thick tinted glass inserted in and including necesary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete incl taking down of existing partition with all fittings and fixtures complete all as specified and directed by Engineer-in-charge. Note :- Power coating shall minimum 50 micron thick.

S&F in repair door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) complete all as specified and directed by Engineer-in-charge.

S&F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work complete all as specified and directed by Engineer-in-charge.

S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel tubing of 20 mm dia chromium plated as in curtain rod complete including stainless steel brackets/finials fency type, stops fixed with stainless steel screws etc complete all as specified and directed by Engineer-in-charge.

M & L for plain sheet glass plain 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out of old/broken glass complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and including all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/ fasteners/ rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified and directed by Engineer-in-charge.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer-in-charge.

S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position complete all as specified and directed by Engineer-in-charge.

S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-charge.

S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and directed by Engineer-in-charge.

S&F in repairs steel rolling shutters, 1.00mm thickness of laths with out ball bearing,but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed by Engineer-in-charge. Note :- Rate including greasing, change of rod, lock, cover hood and other accessories as required.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and directed by Engineer-in-charge.

S&F MS hollow rectangular/ square/ circular tubes/ pipes of YST 310 Grade as in frame work for roofs/rafters/purlins/chajjas/trusses/ columns/ struts etc and like similar items etc complete all as specified and directed by Engineer-in-charge.

M&L for mild steel framed work as in doors or gates of angle Gde-Fe-290 (Gde-E-165) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-charge.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and directed by Engineer-in-charge.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engineer-in-charge.

M&L for providing and fixing gypsum board 12mm thick in ceilingfixed with screw as per manufacturer instructions complete all as specified and directed by Engineer-in-charge.

M& L for two coat of distemper oil emulsion paint on ceiling surface including prepration of new surface complete all as specified and directed by Engineer-in-charge.

M & L for Seamless calcium silicate ceiling 8mm thick made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed by Engineer-in-charge. Note :-Frame work for ceiling shall be measured and paid separately.

S& F anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engineer-in-charge.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-charge.

S & F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/ screws/ solvent etc all as recommended by manufacturer complete all as specified and directed by Engineer-in-charge. (colour/pattern as approved by Accepting Officer).

S&F for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed by Engineer-in-charge.

S&F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed by Engineer-in-charge.

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified and directed by Engineer-in-charge.

M & L Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.

M & L Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.

S & F in repair Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs complete all as specified and directed by Engineer-in-charge.

S & F in repair Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 25mm as in repairs complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 complete all as specified and directed by Engineer-in-charge.

S&F European type water closet including CI P/S trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P/S trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S&F vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S&F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-charge. Note : The items for counter will be measured and paid separately.

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-charge.

S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-charge.

S & F in repair Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing 15mm bore medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing 20mm bore medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-charge.

S & F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish complete all as specified and directed by Engineer-in-charge.

S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed by Engineer-in-charge.

Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed by Engineer-in-charge.

Supply & fixed in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge.

S & F in repair Stainless steel grating 100mm size rounded for floor trap fixed in position complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified and directed by Engineer-in-charge.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engineer-in-charge.

M & L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in subbase of flooring / hard standing complete all as specified and directed by Engineer-in-charge.

M&L plain cement concrete (1:2:4) type B 1 (using 20mm graded stone agregate) cast in situ kerb stone, copings, bed plates complete all as specified and directed by Engineer-in-charge.

M&L for glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-charge.

M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-charge.

M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-charge.

M & L for vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engineer-in-charge.

M&L for 25mm thk PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Material & Labour for ceramic out door tiles 300mmx300mmx10mmm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified and directed by Engineer-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk, no extra will be paid.

M&L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed or 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed by Engineer-in-charge. Note : Single piece should be used in steps/cills/jambs/shelves.

M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed by the Engineer-in-charge. Note : Work will be in patches or in bulk no extra will be paid.

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.

M & L for providing precast cement concrete type B-1 (1:2:4) (using 20mm garded stone aggregate) in copings, apex stones, columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match complete all as specified and directed by Engineer-in-charge.

Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.

Material & Labour for 35mm thick precast cement concrete (1:3:6) type C-0 (using 12.5mm graded stone aggregate) louvres and jallies (measured solid), in cluding all mouldings and frame set in cement mortar 1:4. complete all as specified and directed by Engineer-in-charge.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-charge.

M&L for rendring 15mm thick in cemet mortar (1:4) including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. Note : WPC will be measured and paid separately.

M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in-charge.

Supply only integral liquid water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of 1mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

S & F toughned glass 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with all accessories like handle, stopper with glazing with beads fixed with metal panel pins (beads to be measured separately as 'supplied only') as required including hacking out out glass complete all as specified and directed by Engineer-in-charge.

MARUDHARA CONSTRUCTION COMPANY (BID ID -3159046)

Bhawani Constructions (BID ID -3157637)

GEMRARAMCONTRACTOR (BID ID -3164536)

S K TRADER (BID ID -3158842)