Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.0 LAccepted-AOC | 1 | Accepted-AOC BEING LOWEST TENDERER AND FULFILLING ALL THE REQUISITE CRITERIA | |
| 2 | 2₹25.7 L+₹1.7 L (6.93%)Rejected-Finance | 2 | Rejected-Finance NOT BEING THE LOWEST TENDERER | |
| 3 | 3₹26.6 L+₹2.6 L (10.7%)Rejected-Finance | 3 | Rejected-Finance NOT BEING THE LOWEST TENDERER | |
| 4 | 4₹26.7 L+₹2.7 L (11.2%)Rejected-Finance NO 6 BAJANAI KOIL CROSS STREET CHATHIRAM PATTABIRAM CHENNAI 600 072 | CHENNAI | CHENNAI | TAMIL NADU | 600072 | 4 | Rejected-Finance NOT BEING THE LOWEST TENDERER |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
18 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CHENNAI
GARRISON ENGINEER FORT SAINT GEORGE CHENNAI_600009
PROVN OF AREA DRAINAGE AND ITS ALLIED WORKS AT FIU COMPLEX TEYNAMPET AND CERTAIN OTHER SANCTIONED WORKS UNDER GE CHENNAI
2023_MES_584764_2
8647/E8
Open Tender
Civil Works
Item Rate
183 days
GE CHENNAI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE CHENNAI
₹52,000
Yes
26 Aug 2023
20 Jun 2023
25 Jul 2023
20 Jun 2023
18 Jul 2023
4 Jul 2023
Amount
Excavation in trenches in hard/dense soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, laying cable etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.
Excavating over areas n.exc 1.5m deep and getting out in hard/dense soil complete all as specified and as directed.
All as per item 2.00 here in before but depth exc 1.50m but n.exc 3.00m complete all as specified and directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.
M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, sub base of floors and mass concrete complete all as specified and directed.
M&L for Form work to side of concrete foundation including raft footings, foundation beams, plinth beams bases for columns etc complete all as specified and as directed
M&L for providing RCC M-30 (Design Mix) using graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for Formwork to walls, retaining walls and similar work including attached pillasters, butresses etc vertical or to batter complete all as specified and as directed
M&L for RCC M-30 (Design Mix) using 20mm aggregate as in walls, retaining walls and similar work complete all as specified and as directed
M&L for Form work to suspended slabs n.exc 200mm thick such as in roof slabs, floor slabs, landings and similar work n.exc 200mm thick complete all as specified and as directed
M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in roof slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.
M&L for Formwork to sides of pillars, post columns etc complete all as specified and as directed
M&L for RCC M-30 (Design Mix) using 20mm aggregate as in columns retaining walls and similar work complete all as specified and as directed
M&L for Form work to sides and soffits of floor or roof beam, lintel beam, cantilevers, shelves including supports, overhang etc also splays between floors and beams etc complete all as specified and as directed
M&L for RCC M-30 using 20mm aggregate as in beams retaining walls and similar work complete all as specified and as directed
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors/roof slab n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and as directed
M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.
All as per item No 18.00 here in before but of 6 to 8mm dia
All as per item No 18.00 here in before but of 5mm dia and over as in stirrups, spacers and binders
M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed
M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using exta cement complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brickwork/concrete surface in CM 1:3 with water proofing compound is to be finished even and smooth surfaces without using extra cement. Note: Water proofing compound shall be measured and paid separetely.
Supply only liquid water proofing compound
S&F for 20mm dia plain mild steel round bars for rungs fixed in the sump complete all as specified and as directed
M&L for Precast cement concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) and set in CM 1:6 as cover slabs complete all as specified and as directed
M&L for MS framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw incl bending and welding angles as necessary confirming to Fe-290 Gde E-165 complete all as specified and as directed
S&F 1.25mm thick Mild steel sheet eaves gutters, galvanised class 3 half round with rounded edges of 150mm dia complete all as specified and as directed
S&F Cast Iron work grade FG 150 unmachined in brackets, gully traps, gratings, manhole covers etc and similar articles exc 5kg each complete all as specified and as directed
S&F 150mm bore CI vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and as directed
S&F CI bend 150mm bore all as specified
S&F 110mm bore PVC(SWR) rainwater/drain pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified.
S&F 110mm bore PVC(SWR) rainwater/drain pipes single socketed in any length with rubber ring joints fixed to walls all as specified.
S&F PVC (SWR) bends any radius of size 110mm dia
S&F PVC (SWR) junction single (Single T) equal or unequal of size 110mm bore
M&L for preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer.
Extra for forming fair finished drain or channel exc 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and as directed.
M&L for providing cement concrete type B0 1:2:4 (12.50mm graded aggregate) as in copings, kneelers, weathering slightly rounded or chamfered edges and the like etc complete all as specified and as directed
Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises all as specified.
Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided for all as specifeid.
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded coarse aggregate) as in finished fair and even over concrete surfaces on sub base of floor tiles complete all as specified and as directed.
M&L for Vitrified light shade ceramic tiles 7-8mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layer of mortar 20mm thick CM 1:4 for laying floor finishes complete all as specified and as directed
All as per item No 42.00 here in before but on vertical surfaces such as skirting, dados and risers to step etc, as in backing coat of 10mm thick in CM 1:3.
M&L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 20mm thick CM 1:4 for laying floor finishes complete all as specified and as directed
S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:3 on fair face of brick or concrete surface complete all as specified and as directed.
M&L for complete removal of existing treatment on wall surface and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer including applying plaster of paris putty of 1mm thick all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description exc. 2 sqm and refixing in the same opening after cutting easing and adjusting and refixing builder hardwares as required including renewal of unserviceable builders hardware and screws etc all as specified and as directed
M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description exceeding 10cm width or girth all as specified and as directed by the Engineer-in-Charge.
Taking down and refixing wash down water closet pedestal pattern including fluh pipe and flushing cistern, pvc connection pipe seat cover, etc complete all as specifieds and as directed
Taking down and refixing bip tap 15mm bore fancy type chromium plated complete all as specified and as directed
Taking down and refixing Angle Cock 15mm bore fancy type chromium plated complete all as specified and as directed
Taking down and refixing 15mm bore CP wall mixer fancy type tap complete all as specified and as directed
Taking down and refixing shower rose 15mm bore fancy type chromium plated complete all as specified and as directed
Taking down and refixing pillar tap 15mm bore fancy type tap complete all as specified and as directed
Taking down and refixing wash hand basin vitreous china (flat back or angle back type) any size including pvc connection pipe complete set etc complete all as specified and as directed
S&F in repair brass chromium plated 32mm bore bottle trap for WHB with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and directed.
Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated as per Cat No.BEA-87 of Make Prayag all as specified and as directed by the Engineer-in-Charge.
Supply and fix in repair toilet paper holder with flap recessed type matt chromium plated as per cat No. BA-38 of Prayag all as specified and directed.
Supply and fix in repair soap dish ,matt finished chromium lated (MCH/Colour) as per Cat No.BA-25G Make: Prayag all as specified and directed.
S&F in repair corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP) with bracket and fittings as per cat No. BEA-52 of make Prayag all as specified and directed by Engg-in- Charge.
Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings as per Cat No.BEA-53 of make: Prayag all as specifid and directed.
S&F in repair Towel rail 600mm long CP as per Cat No.BA-20, Make : Prayag complete all as specified and as directed.
Supply and fix in repair CP Square trap size 101mm x 101mm as sper Cat No.FT-73 of Make: Prayag all as specifid and directed.
Supply and fix in repair towel ring , chromuium plated as per cat No.BA-11 of Make: Prayag etc complete all as specified and as directed by Engineer-in-Charge.
A V ENGINEERING
SKM CONSTRUCTION
SHRI BALAJI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .