Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.8 L+₹4.8 L (13.5%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹41.8 L+₹5.9 L (16.3%)Rejected-Finance SCO 248 GROUND FLOOR SEC 20 PANCHKULA HARYANA 134112 | PANCHKULA | HARYANA | 134112 | L3 | Rejected-Finance L3 | |
| 4 | L4₹44.0 L+₹8.0 L (22.3%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹48.7 L+₹12.7 L (35.3%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
28 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-03/2022-2023 REPAIR AND MAINT OF BLDGS OF OFFRS MD ACCN AT FAFA MAP COLONY AND SUNRISE COLONY UNDER AGE B/R I AT CHANDIMANDIR
2022_MES_517937_1
GE/CHM-03/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹99,000
Yes
23 Jun 2022
12 Apr 2022
4 Jun 2022
12 Apr 2022
28 May 2022
14 May 2022
60 days
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc. 15cm thick, below or above ground level, complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the MOD land,complete as specified and directed.
Demolition of brickwork built in cement mortar and removing rubbish off the MOD land,complete as specified and directed.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters (without taking off shutters from the frame), complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each , all as specified & directed.
Taking down shutter of any description not exc 1 Sqm each, all as specified & directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Taking up or down steel tubing of 15/20mm dia with connections, including cleaning for refixing or removal to store , all as specified.
Material and labour plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, all as specified and directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, complete all as specified and directed.
Plain Cement Concrete 1:3:6 type C2, (40 mm graded stone aggs) as in surface channels and drains , all as specified.
Plain cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed.
Plain Cement Concrete 1:2:4 type B1 (20 mm graded stone aggs) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
Plain Cement Concrete 1:2:4 type B-1 (20 mm graded stone aggs) as in fixing of hold fast including necessary form work, complete all as specified and directed.
Factory made rubberised, chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over 15mm thick screed bed in cement mortar 1:6,complete all as specified and directed.
Concrete interlocking pre polished paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning, complete all as specified and directed
Sand filling under floors or in foundations including watering and consolidation , all as specified.
Brick work with subclass ‘B’ bricks of old size, (min. compressive strength 100kg/Sqcm), built in CM (1:6), straight or curved on plan exc 6m mean radius, all as specified.
All as per Srl item no 22 above but except bricks.
Rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth , complete all as specified.
Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth , complete all as specified.
Rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished even and fair , using water proofing compound ,complete all as specified. Note : WPC shall be measured and paid separately.complete all as specified.
Rendering 15mm thick plaster in cement mortar 1:4 on brick wall or on concrete surfaces including dubbing coat if required on internal and external faces of parapet on roof top, RCC facia, RCC parapet wall, cornices, ceiling and finishing the surface even and smooth without using extra cement at height exceeding 6 metre but not exceeding 12 metre and applying 2 Coats cement base paint over a coat of primer including taking down old plaster andnecessary form work and scaffolding as per site requirement, all as specified and directed by Engineer-in-charge.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Preparation of new plastered surfaces of walls, applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
Preparation of plastered surfaces of walls by sand paper etc, and applying one coat of wall care putty (1mm thickness) , complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, including complete removal of existing treatment complete all as specified and directed.
Three coats of white wash on new plastered surfaces of walls including preparation of surfaces complete, all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Preparation of old steel and iron surfaces and applying two coats of synthetic enameled paint , complete all as specified & directed.
Non skid ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Coloured vitrified ceramic tiles, dark shade, jointless, 10mm thick (square ) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per Srl item no 39 but on vertical surfaces.
Glazed ceramic tiles, coloured in vertical surface 300mm x 450mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
Non skid ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Non skid ceramic coloured tiles, size 300x300x 7-8 mm thick in floors in patches (area not exceeding 1 Sqm) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded , all as specified and directed.
All as per Srl item no 44 above but without glazing bars.
Steel windows or ventilators, fixed type, with glazing bars , all as specified and directed.
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
Anodised aluminium powder coated frame (not less than 2mm thick, powder coating not less than 50 microns) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., fixed in repairs, complete all as specified
Anodised aluminium powder coated door/window/ventilator shutters (wall thickness not less than 2mm) including styles and rails, necessary joining cleats, aluminium snap beading, rubber neoprene packing, aluminium hardware, fixed in repairs, complete all as specified. (Glazing and wire mesh shall be measured and paid separately.)
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Factory made flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Supply and fix half panelled and half glazed and skeleton shutter 35mm thick of second class hard wood (divided into sub panels with provision of one vertical rail upto full height),open rebated & prepared to receive glass, gauge etc , edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc ,complete all as specified & directed.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Powder coated (thickness or powder coating of any colour coating not less the 50 micron) aluminium three coat sliding window with and including aluminium grill of design and pattern decided by Engineer -in-charge with and including necessary joints cleats, glazing clips, rubber neoprene packing, aluminium beading, suitable handles and self locking arragement, complete as shown on drawings and as specified. Notes: i) Glass/wire gauge shall be measured and paid separately. ii) Design of window shall be as per drawing no: TD-259(C), sheet 1/3 to 3/3 or as approved by the Engr-in -charge.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
5mm thick sheet glass ordinary quality, fixed to aluminium frame work with and including standard anodised aluminium bead, rubber packing, aluminium screws etc,in panels n.exc 0.5 Sqm in each pane, complete all as specified and directed.
5mm thick sheet glass ordinary quality, fixed to aluminium frame work with and including standard anodised aluminium bead, rubber packing, aluminium screws etc,in panels exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, Fixed in repairs, complete all as specified and directed.
18mm thick solid PVC door shutter made out of 18mm celuka, Printed and UV coated sheet , cut according to the size of the cabinet or the kitchen drawer , grove to be made on the one edge so that the overlapping could be done for double leaf door shutter. The fixing is to be done by the 1.25" M.S screw to the frame with the channel hinge/ clip hinge. Handle to be provided from outside of door, fixed in repairs, completing the work according to the manufacturer's specification & drawing and as directed by the Engineer-in-charge .
Stainless steel powder coated tray of various sizes for drawer to keep the kitchen utensils , all as directed by the Engineer-in-charge .
Block board 19mm thick ,grade IInd quality ,interior grade commercial type fixed with screws to timber frame work as in cupboard , kitchen cabinet racks, wardrobe with 6mm thick IInd class hardwood edging on exposed edges, fixed as in repair, complete all as specified & directed
18/19 mm thick prelaminated particle board, interior grade , prelaminated both side with decorative choice laminated and otherside balancing white lamination, fixed as in shutter, shelves, racks of cabinet box etc with 6mm thick teak wood edging on exposed edges, fixed as in repairs, complete all as specified & directed
20-25mm thick telephonic black granite stone slabs, width and length as ordered, best quality machine cut and granite polished, to be fixed on kitchen platform, steps, pillars, floors etc and joints with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar (1:6) and rounding off/ bull nosing exposed edges and making holes for gas pipe etc including demolition of old stone slabs ,complete all as specified & directed
Kitchen sink with drainage board made of stainless steel lmm thick, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe ,fixed in repairs, all as specified and directed.
Stainless steel plate rack l.00mm thick of size 900mm x 750mm x 300mm with shelves , hanging hooks for utensils,fixed in repairs, all as specified and directed.
Sink mixer one hole with regular spout ( table mounted model), with 450mm long braided hoses, chromium plated, screwed for iron pipe or for union of 15mm bore , fixed as in repair , complete all as specified & directed
Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, ISI marked, fixed in repairs,complete all as specified.
Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, ISI marked, fixed in repairs,complete all as specified.
Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed with screws or with welding , ISI marked, fixed in repairs, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, fixed in repairs,complete all as specified.
Chromium plated hand jet (health faucet) for 15mm bore pipe with 100cm long flexible tube, including fixing of hook on wall, fixed in repairs, all as specified.
Toilet paper holder, cast copper alloy, chromium plated, fixed in position in repairs, complete all as specified and directed.
300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified.
300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete,Fixed in repairs, all as specified.
Butt hinges 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , complete all as specified.
Aluminium door seal brush, fixed with steel screws to bottom rail of the door shutter, Fixed in repairs,complete all as specified.
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints fixed to walls including clamps made out of FI of size 25x3mm, including nuts, bolts and washers, including taking down old pipe, complete all as specified and directed.
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.
Fixing/laying only Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site, all as specified and as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site, all as specified and as directed by Engineer-in-charge.
Ball valves of 15mm bore, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight-142gms)
Ball valves 20mm bore, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms)
15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed.
32mm dia waste coupling / waste fitting with long shank, half thread for kitchen sink/wash hand basin , fixed as in repair complete all as specified and directed.
PVC waste pipe suitable for 32mm dia waste coupling ,fixed as in repair, complete all as specified & directed by Engineer-in-charge.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs,all as specified.
Corner glass shelf of size 200mm x 6mm with chromium plated bracket guard , fixed in repairs,all as specified.
PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.
PVC connections 15 mm size with PTMT nuts of length 600 mm fixed in repair, complete all as specified and directed.
Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor ,fixed in repairs, complete all as specified & directed by Engineer-in-charge.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia CP flush pipe (long type for squatting pan), fixed as in repair, complete all as specified & directed.
Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 250 litres but n.exc. 500 litres and mouths or circulating pipes , complete all as directed.
Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 500 litres but n.exc. 1000 litres and mouths or circulating pipes , complete all as directed.
Drapery rod (conduit) of dia not less than 20mm having a corrugated virgin PVC extrusion on its surface with standard MS powder coated brackets, end caps etc, fixed to walls with rawl plugs and steel screws ,fixed in repairs, complete all as specified and directed.
Hasp and staple 100mm of brass with hinges including bolt to hinge plate and fixed with screws complete all as specified and directed.
Door stopper of aluminium alloy body and tongues anodised with hard drawn steel spring, fixed in floorcomplete all as specified and directed.
Dismantling steel/ iron work in any position complete all as specified and directed
Soap dish, cast copper alloy, chromium plated,fixed in repairs, complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , fixed in repairs.
Door closer aluminium extruded section, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg ,fixed in repairs, all as specified.
Angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Two way bib cock ,cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Bib cock short body, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Wall mixer,3 in 1, with provision of bath, hand shower and overhead shower, cast copper alloy, chromium plated, fancy type, with 115mm long pipe, for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges, fixed in repairs, complete all as specified and directed.
Wash hand basin central hole basin mixer , chromium plated with regular spout and pop up waste system, 450mm long braided hoses, fixed in repairs, complete all as specified and directed.
Chromium plated 100mm dia grating , fixed in repairs , all as specified.
Chromium plated 100mm dia grating with waste hole , fixed in repairs , all as specified.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30mm width, all as specified.
40mm dia, cupboard knobs of brass, polished, complete all as specified and directed.
Bathroom mirror cabinet of size 400mmx500mm, fixed to wall with screws/rawl plugs , fixed in repairs, complete all as specified and directed. Make: PRAYAG/SHAKTI/POLYTUF.
PVC (SWR) floor trap of 75mm bore, plain with grating including jointing with solvent cement, fixed in repairs, all as specified and directed.
PVC (SWR) "P" trap of 110mm bore, fixed in repairs, all as specified and directed.
Fancy type Chromium plated shower rose of 150mm x 150mm size, square type,with swivel joints, (ABS body chrome plated with grey face plate) fixing in repairs , all as specified and directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including angle brackets, fixed as in repair, complete all as specified and directed.
Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)fixed as in repair with ‘P’ or ‘S’ trap, including seat cover and making good the disturbed surfaces and to match with existing surface,complete all as specified.
Vitreous china wash down water closet pan ,semi pedestal pattern (Anglo indian type ), white (excluding fixing bolts, flushing cistern and flush pipe)fixed as in repair with ‘P’ or ‘S’ trap, including seat cover and making good the disturbed surfaces and to match with existing surface, in repair complete all as specified.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
450mm long braided hose PVC connection with two 15mm nuts & rubber washers without nipple (suitable for geysers) , fixed as in repairs ,complete all as specified & directed .
Single piece EWC with UF seat cover, hinges, fixing accessories set, cistern fitting , size 365x655x760mm and S-trap 300mm ,as in repairs, all as directed. Cat part No. LYS -WHT-38851S or equilent in cera.
Single piece EWC with UF seat cover, hinges, fixing accessories set, cistern fitting , size 365x655x760mm and P-trap 180mm ,as in repairs, all as directed. Cat part No. LYS -WHT-38851S or equilent in cera.
Plastic water closet seat cover, white closed pattern with flat bottom,mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed.
Filling joints of waste & rain water CI pipes and fitting of any size with drip seal including cleaning of existing joints to stop Leakage / seepage from joints in shafts of buildings upto six story high, complete all as specified and directed by engineer-in charge.
Fabricating of anti monkey menace with 10 Nos of spikes (05 Nos each side ) in GI sheet (size of sheet 400mm x 150mm 0.5mm ) including providing 2Nos hole for fixing to PVC tank with nut bolts complete, all as specified & directed
Removing loose and broken concrete by chiselling/ by mechnical means upto an averge depth of 25mm from soffit of slab, column, beam and similar structural members ,cutting edges ,cleaning the dismantled portion with wire brush etc to make the reinforcement naked and removing dust/ dirt/ other foregn article etc, complete all as specified & directed by Engineer-in charge. (ii)Apply IPH RB-107 polymer based rust-remover(pH valve -12)and applying IPH-167 polymer based rust preventive (pH valve -9) to all exposed reinforcement bars, complete all as specified & directed by Engineer-in charge. (iii) Applying polymer modified cement mortar rendering 25mm average thickness in CM 1:3 in two layers including and mixing polymer modified 'Nitoband AR' of make: M/s Fosroc Chemicals India (P) Ltd @ 10 Ltr per bag of cement or equivalent in Harjas Coatings & Polymers @ 5% by wt of cement or equivalent make in Dr Fixit of Pidilite Industries, complete finished even & smooth without using extra cement, all as specified and as per manufacturer's instructions.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete ,confirming to Fe-290 grade E-165, all as specified.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, all as specified and directed.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified , fixed in repairs, all as specified.
Fibre glass reinforced translucent corrugated/plain sheet 2mm thick , fixed with coach screws and washers as in roof covering/cladding to wall, fixed in repairs, all as specified.
Raking out joints/ pointing to brick work in walls , on edge in floors, surface channels, roofs, etc and Flush pointing in CM(1:3) to brick on edge ,laid flat, or brick tiles in pavings , all as specified and directed.
Roughening surface of old concrete floor by picking, seeping clean and washing down with water to remove dust etc incuding brushing neat cement slurry with 3.0kg of cement per Sqm, complete all as specified and directed.
Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Supply and Fix partly panelled and partly Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed.
Five layered reinforced with non -woven polyester matt, 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
aggarwal contractors and engineers
VARUN TRADERS
Gunjan and Gunjan Associates
M/s Krishan Aggarwal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .