GRASS CUTTING AROUND OPERATIONAL AREA AND ALLIED WORKS TO RUNWAY TAXI TRACK AND DISPERSAL ETC AT INS HANSA UNDER AGE BR I OF GE NW VASCO

Amount

M&L for cutting of vegetation / grass shrubs using grass cutting machine including cutting of small trees etc by manually on runway, taxi track, dispersal and W/T pad sides upto GL & cutting of bushes including grubbing up small trees and removing the waste to a distance exc 7 km outside the periphery of the airfield area complete all as specified and as directed.

All as per item No 1.00 above for the same location after a minimum gap of one month or more than one month or as and when required basis after first cutting all as directed.

All as per item No 1.00 above for the same location after a minimum gap of one month or more than one month or as and when required basis after second cutting all as directed.

All as per item No 1.00 above for the same location after a minimum gap of one month or more than one month or as and when required basis after third cutting all as directed.

Removing leaves, grass, bushes, soil, plastic bags or any other waste material/debris from drains of depth not exceeding 1 mtr and removing the debris to a distance not exceeding 5 Km outside the periphery of the airfield area including removing and refixing of cover slabs all as directed.

M&L for dry sand filling over SGA including spreading, levelling and ploughed to form furrows at an angle of 30 degrees proportionally to the existing ground. (Sand shall be coarse sand as approved of size 1.16 to 2.34 micron all as specified and as directed). Note :- (i) Mode of measurement shall be truck measurement / trucks body (internal consolidated) measurements.

Ploughing and furrowing SGA point by mannually all as directed (Furrows should be to form of 30 degree angle).

All as per item No. 7.00 above on the same area after three months of first time or as and when required.

All as per item No. 7.00 above on the same area after three months of second time or as and when required.

All as per item No. 7.00 above on the same area after three months of third time or as and when required.

All as per item No. 7.00 above on the same area after three months of fourth time or as and when required.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but exceeding ashlar facings, dressed stonework and precast concrete articles.

Pre-cast cement concrete 1:3:6 type C-1, (20 mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 complete all as specified and as directed .

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC type C2 1:3:6 (40 mm graded aggregate) as in foundation of drains etc complete all as specified and as directed.

M&L for PCC type B0 1:2:4 (12.5 mm graded aggregate) as in haunching including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for PCC type B1 1:2:4 (20 mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for Rendering 10 mm thick in cement mortar (1:4) on brick surface and finising plastered surface with using extra cement, complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including form moulds mitered/stopped ends etc.

Add for additional 25 mm inner girth over 30 cm over item No 19 above all as specified.

R K SINGH AND CO

tulsani associates