Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 LAccepted-AOC | ₹1.0 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹1.0 L+₹2,421.46 (2.38%)Rejected-Finance | ₹1.0 L+₹2,421.46 (2.38%) | L2 | Rejected-Finance Highest |
| 3 | L3₹1.3 L+₹26,564.20 (26.1%)Rejected-Finance | ₹1.3 L+₹26,564.20 (26.1%) | L3 | Rejected-Finance Highest |
Tender Value
₹1.1 L
EMD Value
₹2,400
Closing Date
16 Apr 2021, 5:00 pmClosed
Amit Manuja
Executive Engineer, Provincial Division No.1, PWD B and R, Kurukshetra
Special Repair / Renovation of Sub Health Centre at Village Seonnsar in District Kurukshetra (Under Health Wellness Centre Scheme) (Excluding EI)
2021_HRY_166244_2
PWD/AMB/KKR-1/110116
Open Tender
Construction Works
Works
60 days
Kurukshetra
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹2,400
30 May 2021
10 Apr 2021
19 Apr 2021
10 Apr 2021
16 Apr 2021
10 Apr 2021
Amount
Dismantling brick work, tile masonry or tile lining & tile tracing. (b) In Cement (HSR 8.5 (b)
Removing doors & windows (wood & steel ) with chowkats by making recesses in the walls (HSR 8.18 (a) Doors
Removing doors & windows (wood & steel ) with chowkats by making recesses in the walls (HSR 8.18 (b) Windows
Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick i/c concrete base (HSR 8.25 )
Scraping Cement plaster (HSR 8.32 (c) )
Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)
Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS.& RAK AND SIMPOLO. (HSR 14.89)
Pdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS.& RAK AND SIMPOLO. (HSR 14.91)
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. b) Size of ceramic Glazed tiles 300 X 450mm (HSR 14.92)
Plastering on walls 12 mm thick cement plaster 1:4 (HSR 15.5)
Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2)
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete urfaces to give an even shadeas. (HSR 16.3)
Distempering with washable oil bound distemper (of approved manufacture ) two coats over one priming coats on new work. (HSR 16.58)
Providing two coats of exterior acrylic emulsion paint (b) 1st quality (HSR 16.79 (b)
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (JK/ Birla make) (HSR 16.81)
Supplying & fixing glass panes with moulding of commercial hard wood such hollock, champ, chikrassy, and chaplash, etc. (c ) 4mm thick (HSR 17.36 (c ))
Factory manufactured panelled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick commercial veneered both sides particle board or plywood of B.W.R. grade, hot-presses, including cost of iron hinges,screws,chocks/cleats,stops, and nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position).( HSR 17.91) (b) 35 mm thick (-) note .
Pressed steel sheet frames (chowkats) , consisting of 2 mm thick steel sheet of the specified section, including iron lugs (Holdfast), iron hinges, confirming to PWD specifications, including bolts for fixing stops etc. (HSR 18.34 ) (a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate )
Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].
Providing and fixing in position best Indian make (Ordinary ) lavaatory suites white consisting of lavatory in Vitreous chinaware size as given below to the approval of the Engineer In Chargeietc (i) 460mm x300mm with one no. tab. (iv) Size 550mm x 400mm with one no. tab(HSR- 30.41-(iv)
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc. (a) C.P. Brass (i) Soap dish Large. [HSR 30.70 (a) (i)].
Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.
Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (ii)].
Providing and fixing in position automatic brass ball valves in tanks. (b) With Plastic Ball (ii) 20 mm internal diameter. [HSR 30.110 (b) (ii)].
Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. [HSR 30.119]. 1000 Ltrs. Capacity Water Tank
Recovery Items:- Door, Reserve price @ Rs. 500/- Each
Windows, Reserve price @ Rs. 300/- Each
Good Tiles, Reserve price @ Rs. 5/- Each
Tiles Bats, Reserve price @ Rs. 500/- Cum
The Jagat co op L and C Society ltd
Amarjeet Singh Contractor
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .