Loading…
Loading…
Tender Value
₹5.3 L
EMD Value
₹13,200
Closing Date
18 Jul 2025, 10:00 pmClosed
Directorate of Municipal Administration
Construction of Toilet block in Ambedkar Colony in Shirur town
DMA/2025-26/BD/WORK_INDENT44470
DMA/2025-26/BD/WORK_INDENT44470
Open
Buildings
Electronic Documents, First(One Cover)
DMA Town Panchayat Shirur
₹500
₹13,200
8 Jul 2025
8 Jul 2025
9 Jul 2025
Construction of Toilet block in Ambedkar Colony in Shirur town
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position cement concrete levelling course for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Form Work : As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Slab form works consider 50% (PWD DSR 2023-...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Form Work : As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Slab form works consider 50% (PWD DSR 2023-...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 (PWD DSR 2023-24Vol No 2, P. No. 117 It No. 13.12 )
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : (PWD DSR 2023-24Vol No 2, P. No. 115 It No. 13.6 )
Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and fixing Polyethylene Aluminum Polyethylene Composite Pressure Pipes conforming to IS 15450 duly ISI marked, U V stabilized with Carbon black for hot cold water supply, capable to withstan...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .