SPL REPAIR TO PERIMETER SECURITY LIGHTS FROM BN-III TO INF BDE AT NIWARU MIL STN ALONGWITH RENEWEL OF SUMMER APPLIANCES AGAINST BER AT JPR MIL STN

S&F in replacement 1.5 Sqmm 3 core Rodent Resistant copper conductor cable, PVC insulated and PVC round sheathed, copper conductor (flexible) industrial cable, 1100 volt, confirming to IS : 694 including connecting the cable from street light to junction box passing through pole with and incl proper lugs and taking down of old unsv cable complete all as specified and directed. Note- (i) Cable is reqd to be connected from street light to junction box with and incl proper lugs. (ii) Cable will be fixed from inside of pole. (iii) No Seprate payment payment will be made for taking down and refixing of street light for connection of light and cable.

Supply, fixing and testing in replacement SMC junction box of size 250 x 200 x100 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected slanted roof top, door plasted with rubber gasket, water tight IP 55 with integrated membranes/metric knockouts for cable entry with cable glands, comprising with nut and bolt type bus bar 100 Amps for phases and neutral of required amps capacity for cable size 16/35 sqmm 2 core, protection and suitable size of connectwell type stud terminal (provision for socket bolting) - 04 nos suitable for internal wiring system including 06 amp MCB SP- 01 No, junction box should mounted on existing tubular/PCC pole with and incl suitable clamp, nuts, bolts including removal of existing unsv junction box complete all as specified and directed.

M & L for prepration of old painted / rusted surface of LT steel tubular pole (11 meter long) and steel fittings, fixtures, clamps etc on pole by scraping, cleaning etc and applying two coat of aluminium paint over a coat of red oxide primer after prepration of surface and making strip of 30 cm width (red and white in alternate band) upto 1500 mm height from bottom of the pole (on ground surface) with synthetic enamel paint and writing pole No. with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Note:- (i) Time diff between 1st and 2nd coat shall not be les than 24hrs. (ii) The quoted rate includes the cost of ladders, any other T & P/ crane arrangment to approach the street light, labour, surrounding cleaning / cutting of grass / bushes / small tree branches for approacing to pole all as directed and specified by Engineer-in-Charge. (iii) Contractor is requested to visit the site before quoting the tender

Supply, laying, jointing, testing & commissioning 1100 volts grade, Rodent Resistant cable, XLPE insulated, screened PVC sheathed, galvanised steel strips or wire armoured, heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade cross sectional area 16sqmm, 2core confirming to IS:7098 (part-I), laid in trenches, ducts, pipes or fixed on poles or walls including all necessary clamps, nut, bolt, washers, saddle etc incl taking down old U/S cable complete all as specfied and directed.

,---ditto--- all as per srl item No 4 above but of size 25 Sqmm, 3.5 core cable complete all as specfied and directed.

S&F in replacement of LED Street Light of 75W made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. Operating voltage range: 140 V - 270 V. Operating temperature: -10 °C to + 50 °C . Average life 50000 burning hours. Light fixture length should not less then 295mm +/- 5% and Light should have 110 LU/W with minimum 7900 Lumens. Street light shall be fixed on existing bracket with and incl suitable size of nut, bolts etc incl taking down old U/S light complete all as specified and directed.

Supply, install, testing and commissioning of LT panel, fabricated out 3.15mm thick powder coated CRCA steel sheet (Outdoor type) of size 600mm X 600mm X 300mm with openable shutters on both sides (Front and rear) having locking arrangement, totally enclosed, dust and vermin proof, protection class IP-65, weather proof, danger notice sticker, mounted on 65mm X 65mm X 6mm angles iron stand grouted in PCC complete suitable for 440 volts, 3 phase, 4 wire, 50 Hz, with properly insulated colour coded aluminium bus bar, with approach for cable entry and for easy maintanance duly internally wired with FRLS, PVC insulated stranded copper conductor cable of suitable size including LED indicator for R, Y & B and comprising of the following : Incoming :- (i) MCCB 415 Volts of capacity 63 Amps 16 KA, 4 pole - 01 No ( 01 No) (ii) Bus Bar :- 200 Amps, TPN, Aluminium Bus bars : 01 Set Outgoing :- (iii) MCCB SPN 230 V, 32 Apms -03 Nos (iv) 3 ph LED multifunction metrer CI 0.5 -01 Set (v) LED indicator lamp –01 No (set of three) (vi) Din type Astronomiical Digiital Time switch 32 Amps along with contactor for street light

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for laying of cables n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed.