Restoration of damage to staff quarters and retaining wall adjoining staff quarters due to heavy rain (July 2023) at Cafe Satluj Rampur Distt. Shimla (H.P).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Ordinary cement without any pigment as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Painting One or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Polishing two or more cots with Malamine polish on old wood and wood based surfaces to give an evan surface including cleaning the surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Wall painting Two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Distempering Two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of materials within all leads, lifts and heights.

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material in specified manners within all lead. For thickness of tiles 10 mm to 25 mm as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Please Enable Macros to View BoQ information