PROVIDING AND INSTALLATION OF CHILDREN PLAY EQUIPMENTS IN DIFFERENT PARKS AT WARD NO. 58 KESHAV PURAM ZONE UNDER MPLAD FUND FOR PARKS IN MUNICIPAL CORPORATION OF DELHI.

SUPPLY AND FIXING OF ARCH SWING. LEG SUPPORT : 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT / U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIRN. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF TODDLER SWING.THE AREA :- 2.8M X 1.0M . IN THIS TODDLER SWING THE CENTER SUPPORT SHALL BE MADE UP OF 80 MM NB B CLASS G.I. PIPE. THE HORIZONTAL BARS SHALL BE MADE UP OF 50 MM NB B CLASS G.I. PIPE. ALL GI PIPES SHALL BE POWDER COATED. BETWEEN THE TWO HORIZONTAL BARS THERE SHALL BE A HEAVY-DUTY METAL CLAMP ATTACHED TO IT. THE BUCKET SEATS OF THE TODDLER SWING SHALL BE MADE OF RUBBER WITH ANTI SKID. THE BALL BEARINGS SHALL BE MOUNTED INSIDE SPECIALLY DESIGNED NYLON BALLS. THE RUBBER SEAT SHALL BE AFFIXED ON 8 MM THICK GI CHAIN. THE SEATS SHALL BE MADE WITH FULL CARE SO THAT THE CHILD DOES NOT FALL FROM IT WHILE SWINGING. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF SPIRAL SLIDE. LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 2.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE F R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. SPIRAL SLIDE SHALL BE CHUTE MADE OF FRP (FIBER REINFORCED PLASTIC / LLDPE (LOW LINEAR DENSITY POLY ETHYLINE) HAVING THICKNESS OF 4MM SLIDE CENTER SUPPORT SHALL BE 80MM NB B LASS GI PIPE. LANDING MODULE SHALL BE SUPPORTED BY 20MM NB B CLASS GI PIPE. SLIDE EXTENSION PLATFORM SHALL BE MADE FROM FRP / LLDPE. THE RAILING SHALL BE MADE FROM 15MM NB AND 20NN NB B CLASS GI PIPE. ALL PIPES SHALL BE COATED WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF FOUR SEATED MERRY GO ROUND. AREA: 1.5 M. HEIGHT – 0.8 M. SEAT – MOULDED F.R.P. MAIN FRAME: 40 NB G.I. PIPE. BEARING : HEAVY DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. THE ITEM SHALL BE HAVING ITS MAIN FRAME MADE UP OF 25 & 40. MM NB “B” CLASS G.I. PIPE. THE STAND SHALL BE MADE IN 80 MM NB “B” CLASS G.I. PIPE. THE WHOLE STRUCTURE SHALL BE MOUNTED ON HEAVY DUTY BEARING SHAFT. THE BEARING USED SHALL BE OF HEAVY DUTY BEARING PERMANENTLY LUBRICATED WITH WATER SEALANT. THE SEAT FRAME SHALL BE MADE OUT OF FRP (FIBRE REINFORCED PLASTIC)/LLDPE (LOW LINEAR DENSITY PLOY ETHYLENE). THE SEATS SHALL HAVE HANDRAILS SO THAT THE CHILD DOES NOT FALL. IT SHALL ACCOMMODATE 4 CHILDREN AT A TIME. THE POWDER COATING SHALL BE DONE ON THE PIPES TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF WAVE LADDER.MAIN BODY :-32 MM N B GI PIPE. SUPPORT :- 25 MM NB GI PIPE. THE TOPCOAT IS DULY POWDER COATED.  IT SHALL HAVE MAIN FRAME MADE OF 32 MM G.I PIPE WITH STEPS MADE FROM 25 MM G.I PIPE THE PIPES SHALL BE POWDER COATED TO PREVENT RUSTING AND FOR AESTHETIC LOOK. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. THE LEVEL OF SEE SAW SHALL BE MADE FROM 15, 20 AND 25MM NB B CLASS GI PIPE. THE SEAT OF SEE SAW SHALL BE MADE FROM FRP/LLDPE. THE STAND AND BUSH BEARING MADE IN 40MM NB B CLASS GI PIPE. SEE SAW LEVER SHALL BE WELDED TO 5MM THICKNESS MS PLATE FOR NUT BOLTING WITH STAND. ALL PIPES FLAT SHALL BE POWDER COATED TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE)C37C40C41C39 (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF ZIG ZAG BALANCE BEAM:LENGTH 4M X WIDTH 101.6 MM X HEIGHT 457.2 MM NB "B" CLASS G.I. PIPES. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF STRAIGHT NET CLIMBER. AREA : 0.5 M X 1.7 M. HEIGHT : 2.1 M. THE MAIN FRAME OF STRAIGHT NET CLIMBER SHALL CONSIST OF 40 MM NB B CLASS GI PIPE. -THE JOINT BALLS SHALL BE MADE FROM LLDPE (LOW LINEAR DENSITY POLYETHYLENE) /PP MATERIAL WITH GROUP SCREWS PROVISION FOR ROPE HOLDING. -O HOOKS OF THE FRAME HAVING 50MM BENDING DIA AND ROD DIA 8MM. -THE LOOP SHALL BE GIVEN TO THROUGH O HOOKS  TO GET A GRIP WHILE CLIMBING. -ROPE USED OF PP NYLON MIX TYPE HAVING 22 MM DIAMETER. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

SUPPLY AND FIXING OF HALF ROUND NET.AREA : 3.3 M X 1.7 M. HEIGHT : 2.1 M. THE MAIN FRAME VERTICAL PIPES OF STRAIGHT NET CLIMBERARE MADE FROM 50 MM NB B CLASS GI PIPE. -THE CURVE PIPES ARE MADE FROM 32 MM NB B CLASS GI PIPE.  -THE JOINT BALLS SHALL BE MADE FROM LLDPE (LOW LINEAR DENSITY POLYETHYLENE) /PP(PURE PROPYLENE) MATERIAL WITH GRIP SCREWS PROVISION FOR ROPE HOLDING. -O HOOKS OF THE FRAME HAVING 50MM BENDING DIA AND ROD DIA 8MM. -THE LOOP SHALL BE GIVEN TO THROUGH O HOOKS  TO GET A GRIP WHILE CLIMBING. -ROPE USED OF PP NYLON MIX TYPE HAVING 22 MM DIAMETER. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)