Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC BMC 1 54 GANTI NETAJI PALLY PO GANGANAGAR KOLKATA 700 132 INDIA | 24 PARAGANAS NORTH | WEST BENGAL | 700132 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹12.4 L+₹2.3 L (22.5%)Rejected-Finance 168 BISWA SINGHA ROAD NEAR DAS BROTHERS COOCH BEHAR WEST BENGAL 736101 | COOCHBEHAR | WEST BENGAL | 736101 | L2 | Rejected-Finance BEING HIGHER THAN L1 BID | |
| 3 | L3₹14.1 L+₹3.9 L (38.6%)Rejected-Finance 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L3 | Rejected-Finance BEING HIGHER THAN L1 BID |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (CGN) kolkata
DAMODAR COMPLEX GARDEN REACH ROAD KOLKATA 23
REPAIR/MAINT TO B/R SERVICES TO OTM ACCN AT INS NETAJI SUBHAS AND DAMODAR COMPLEX UNDER GE (I) (CGN) KOLKATA
2022_MES_525046_1
8021/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE (CGN) kolkata
AS PER TENDER DOCUMENT
11 documents required · 11 mandatory
₹500
GE (CGN) kolkata
₹28,000
Yes
17 Aug 2022
19 May 2022
20 Jun 2022
19 May 2022
18 Jun 2022
4 Jun 2022
60 days
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.
Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed.
S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.
S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed.
S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed.
S&F 35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.
S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.
S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed.
Resecuring or easing & adjusting of shutters without taking down of shutters of any description exc 2.0 Sqm each complete all as specified and directed.
M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & .
S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed.
M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsarea exceeding 1.5 sqm complete all as specified and directed.
S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 sqm in each pan all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed
Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required ®
S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165.
S&F in repair wall mixer, cast copper alloy, screwed down, high pressure (chromium plated) with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed. (Make: Jaquar code No CON 273KNUPR or equivalent).
S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed. (Make Parryware, Model -slimline economy or equivalent).
S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed. (Make: Jaquar code No CON 053KN or equivalent).
S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar code No CON 037KN or equivalent). .
S&F in repair tubular towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed .(Make-Jaquar model No ACN-1111NM, or equivalent)
M&L in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.(Make : Jaquar : AKP-35771P or equivalent).
M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed.
S&F in repair stainless steel grating round of size 125mm dia with waste hole of approved design complete all as specified and as directed.
S&F in repair 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.
S&F in repair Cast iron floor trap 100 mm, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F in repair 32 mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as waste pipe of suitable length etc. complete all as specified and directed.
S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repair stainless steel kitchen rack of size 750mm x 600mm x 300mm with 2 shelf, made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed.
S&F in repair 150 mm size extruded brass handles fabricated type, polished complete all as specified and directed.
M&L in repair 25mm dia stainless steel curtain rod with catrip type with hooks/brackets fixed on walls complete all as specified and directed.
S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15 mm dia basin mixer cast copper alloy, chromium plated, single lever, without popup waste, 450 mm braided hoses with capstan head, high pressure with long screwed shanks and fly nuts screwed for iron pipes, (Make : Jaquar Cat No - COP-051BPM or equivalent as per app B)
S&F in repair Aluminium corrugated sheeting Alloy 31000 H4, STUCCO embossed finish 0.71 mm thick with two corrugations side lap fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart complete all as specified and as directed work upto 4th floor.
ditto above item No 45 but work from 5th to 8th floor.
Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc to a distance n.exc 50 m from the site (s) complete all as specified & directed.
M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 with integral WPC, finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.
M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.
M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L coloured printed glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed.
S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar 1:4 on floors for laying floor finish all as specified and as directed. Make : Johnson
M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed.
S&F in repair door closer hydraulically regulated designation No. 1 universal type cast iron body sutable for door and shutter up to 700 mm width and of weight not more than 35 Kgs and fixed all as specified and as directed
M&L PCC 1:2:4 type B1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed.
M&L for cleaning of aluminium window sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed.
M&L for cleaning of aluminium door shutter sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed.
M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed.
S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed.
Taking down aluminium window/ventilator with side hung,top hung or fixed type, sliding shutter of any description.
S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed.
Dismantling water tanks capacity exceeding 1000 litres but not exceeding 2000 Litres and keeping aside for credit complete all as specified and as directed.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 2000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
M & L for one coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed.
M & L for one coats of distemper oil emulsion including preparation of old plastered surfaces of ceiling complete all as specified and as directed.
M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed for work upto 4 th storied.
M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed for work from 5 th to 8th storied.
M & L preparation of old plastered surfaces of ceiling and chajjas and applying one coat of exterior emulsion paint (weather coat) complete all as specified and directed for work upto 4 th storied.
M & L preparation of old plastered surfaces of ceiling and chajjas and applying one coat of exterior emulsion paint (weather coat) complete all as specified and directed for work from 5 th to 8 th storied.
Dismantling of stone slabs & tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed.
M&L Granite (of any type) slab, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting over 15 mm thick cement mortar (1:3) complete all as specified and as directed.
S&F in repair anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed.
M&L for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed.
S & F in repair 32/40 mm dia 800 mm long PVC corrugated waste pipe fixed to walls complete all as specified and as directed
S & F in repair PVC flush / waste pipe 32 mm dia 150 mm long fixed to walls complete all as specified and as directed.
S & F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.
S & F in repair ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed.
S & F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed complete all as specified and as directed.
S&F extruded aluminium alloy handles, fabricated type anodised complete all as specified as directed.
S & F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed.
S & F in repair vitreous china squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed.
M & L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45⁰ at 150 mm centre to centre and sealing the same complete all as specified and as directed.
S&F in repair stainless steel peg set of 4 pegs fixed on walls with steel screws complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified.
S&F Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
S&F 15mm dia hand shower health faucet ABB body chromium plated with 1.00 m long CP flexiable pipe including holder fixed with screws in plastic cleat or wooden cleat complete all as specified and as directed including taking down old one. (Make : Jaquar Cat No ALD- 565 or equivalant
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.
R R ENTERPRISE
SINHA ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .