works

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres.

Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers, including ramming watering and consolidating lead upto 30 metres.

Cement concrete 1 : 4 : 8 with Stone ballast 40 mm Nominal size in foundation and plinth

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but

First class brick work laid in cement sand mortar 1:6 in foundation and plinth.

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel.GROUND FLOOR

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel.In Ist Storey

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel.In In 2nd Storey

11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in super structure. GROUND FLOOR

11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in super structure. In Ist story

11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in super structure. In 2nd story

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. Ground Floor

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. in first story

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. Ground Floor in 2nd story

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. Ground floor

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. In ist floor

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. in 2nd floor

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. Ground Floor

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. In first floor

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls (10 cm to 20 cm thickness) straight and curved excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. in Ground floor

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. In Ground Floor

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. In first floor

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. In 2nd floor

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete.

FE-500 EQR TMT Steel bar for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete.

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.

Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping.

Kotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing in Ground floor

Kotah stone flooring 34 mm to 40 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing in First floor

Kotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. in Ground floor

Kotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc.in first floor

Providing and fixing vitrified tiles of size 600 X 600 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in Ground floor

Providing and fixing vitrified tiles of size 600 X 600 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in first floor

Providing and fixing vitrified tiles of size 600 X 600 mm or above size of approved make in skirting/Dado laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in Ground floor

Providing and fixing vitrified tiles of size 600 X 600 mm or above size of approved make in skirting/Dado laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in first floor

Providing and fixing ceramic tiles antiskid of size 400 X 400 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in Grond floor

Providing and fixing ceramic tiles antiskid of size 400 X 400 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be premium quality (first quality) of reputed manufacturer like Nitco, Kajaria, Somani, Orient, Johnsaons & Rak) in first floor

12 mm thick cement plaster 1:6 in Ground floor

12 mm thick cement plaster 1:6 in first floor

12 mm thick cement plaster 1:6 in 2nd floor

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall in ground floor

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall in first floor

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall in 2nd floor

10mm cement plaster 1:4 in grond floor

10mm cement plaster 1:4 in first floor

10mm cement plaster 1:4 in 2nd floor

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. in grond floor

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. in first floor

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. in 2nd floor

Providing & fixing PVC Rain Water pipe 6kg. Pressure of ISI mark in cement morter during masonary work. 100mm dia PVC pipe 6 kg. presure

Providing & fixing PVC Bend ISI mark 100mm dia PVC Band

Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16

Cement concrete 1:2:4 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified.

Providing & Laying average 6mm thick POP Coating on walls, Celling, beams & Lintels etc. complete in all respect as approved by the Engineer-in-Charge

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position

Supplying and fixing rolling shutters, of approved make, M.S. laths, interlocked together through their entire length, and jointed together, t the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade no. 2 and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) with 80 mm X 1.00 mm M.S. Laths

Supplying and fixing rolling shutters, of approved make, M.S. laths, interlocked together through their entire length, and jointed together, t the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade no. 2 and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) with 80 mm X 1.25 mm M.S. Laths

Providing and fixing ball bearing, for push and pull type rolling shutters, from 9.20 to 12 sqm area.

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete door and window frame of size 89 mm X 50 mm with 40 mm wide single rebate

door and window frame size 127 mm X 50 mm with 40 mm wide double rebate

Supplying and fixing glass panes including special metal sash putty of approved make Glass panes 4 mm thick, exceeding 40 sq dm areas.

Factory- manufactured paneled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than tak, conforming ot I.S. specification no. 1003, kiln-seassoned), with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail and 100 mmm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in positon (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in positon)

Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide locak rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide)

Cost of aluminium fitting complete for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt

Providing and fixing sliding bolt with nuts and screws etc. complete- Size 250mm X 16mm

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

Applying priming coat with metal primer on New steel or iron work including preparation of surface.

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work.

P & L Birla Putty

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.

Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work.

Dholpur stone tiles 25 mm thick in wall facing (lining) laid in anypattern as specified on 12 mm thick cement coarse sand mortar 1:3 and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and labour for fixing cramps, pins and dowels etc.

Earth filling under floor with an avg. lead 8KM

Construction of Boundary Wall Complete in all respect as per satisfaction of Engineer in Charge

PROVIDING AND FIXING IN Position in BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for Sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I, ‘P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT WITH NON-CONCEALED ‘P’ OR ‘S’ TRAP with or without vent and all other necessary Fittings as fully described in item no. 30.3 above.

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLAT BLACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH consisting of:- (HSR 30.19) Flat black lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval Of the Engineer-in-charge)

PROVIDING AND FIXING IN POSITION INDIAN MAKE ORDINARY LAVATORY SUITES Consisting

Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Long Body and Bib Cock

P & F HDEP water storage tank of sintex diplat etc. 1000 Ltr

P & F HDEP water storage tank of sintex diplat etc. 2000 Ltr

Providing and fixing oin position auromatic brassball valves in tanks

Providing and Fixing 100mm I d PVC Pipe complete with specials

P & F 20mm i/d PVC Pipe complete with specials

P & F 40mm i/d PVC Pipe complete with specials

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) Stop cock male and female end

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. Size 450 mm x 450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 40 kg with C.C. topping )

CONSTRUCTION OF RECTANGULAR STANDARD BRICK MASONRY MANHOLE CHAMBERS to standard drawings on S.W pipe sewers or other circular pipe sewers upto the required depth in 1.5 CEMENT SAND MORTAR, lime concrete in bed and sides of pipe sewer and cement concrete 1:2:4 IN BENCHING, 12 MM THICK WATER TIGHT 1:2 CEMENT SAND PLASTER WITH A FLOATING COAT OF NEAT CEMENT AND FINISHED WITH 2 COATS OF sodium Silicate on interior surface where required. REINFORCED CEMEN CONCRETE SLAB 180 MM THICK FIXING 560 MM internal diameter C.I. MANHOLE COVER AND FRAME WEIGHT not less than 2.5 quintal PAINTED WITH 3 COATS OF BLACK BITUMEN PAINT, FIXING galvanised Malleable IRON STEPS embedded in 1:2 cement sand mortar COMPLETE for 1.20 metres depth below ground level

Earth work in excavation in foundations, trenches Of under ground structures sullage drains, etc., and Other similar works in ordinary soild including Dressing of bottom and sides, to correct levels and templates, cutting Of trees and bushes, dewatering of rain water, diversion of traffic, fixing And maintenance of caution boards, and night singnals, crossing over Trenches for access to houses, watching stacking of excavated soil, clear 100 MM Dia Pipe

Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth. 100 MM Dia Pipe

LABOUR FOR LAYING JOINTING, FIXING AND TESTING G.I/P.V.C/W.I PIPE LINES AND SPECIALS tees bends, Sockets elbows etc., INSIDE BUILDING and testing etc., complete including cutting threading. 20 mm internal diameter of pipeline

LABOUR FOR LAYING JOINTING, FIXING AND TESTING G.I/P.V.C/W.I PIPE LINES AND SPECIALS tees bends, Sockets elbows etc., INSIDE BUILDING and testing etc., complete including cutting threading. 40 mm internal diameter of pipeline

DRILLING AND TAPPING CAST IRON PIPE LINES OF ALL DIAMETERS AND SCREWING IN FERRULE AND CONNECTIONS 40 mm internal diameter

CUTTING HOLES UPTO 23 CM SQUARE THROUGH STONE MASONARY OR BRICK WORK IN CEMENT WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required. 11.43 cm thickness of walls

CUTTING HOLES UPTO 23 CM SQUARE THROUGH STONE MASONARY OR BRICK WORK IN CEMENT WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required. 22.86 cm thickness of walls

Fixing galvanised malleable iron holder bats hold fasts to pipe lines fixed on walls and ceilling including all cuttings to walls and making good to original condition. 11.43 cm thickness of walls

Fixing galvanised malleable iron holder bats hold fasts to pipe lines fixed on walls and ceilling including all cuttings to walls and making good to original condition. 22.86 cm thickness of walls

Wiring in 1.5Sq.mm PVC insulated copper conucted cable 1.6mm thick conduct pipe Fan point ( Medium Point )

Wiring in 1.5Sq.mm PVC insulated copper conucted cable 1.6mm thick conduct pipe Light point ( Short Point )

3 Pin 5AMP. Plug point i/c earthing 3rd pin ( Short Point )

3 Pin 15AMP. Plug point with 4sq.mm PVC insulated copper conductor cable i/c earthing 3rd pin (Short Point )

Supply & Erection of PVC conduict pipe ISI marked (Medium) recessed in wall/ceilling etc. i/c cost of PVC bends, inpection box and all other material required to complete the job in all respect up to the entire satisfication of Engineer-incharge of work ( 20MM Dia )

Supply and erection of miniature circuit breaker/isolator 240/415V in the existing distribution board including making necessary connections 6 amp. To 32 amp.

Supply and erection of hexagonal M.S Fan box 1.60 mm thick having each side 8 cms 7.5 cms deep top covered with M.S lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable Suspension hook and erected in R.C.C slab

Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required

Extra for using salt and charcoal/coke for for pipe earth electrode as required

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I wire in 15 mm dia G.I. pipe from earth electrode as required

Pdg. and fixing 4.00 mm dia G.I. wire on surface or in recess for loop earthing as required

Supply & Eraction of socket size rotary step type Electronic Regulator for A.C ceiling fan Anchor make Deluxe model No. 50440 ISI/SSK make PC 561 operated an 120/280 V.A.C. Supply complete i/c cutting of existing bakelite sheet and making necessary connetction etc. upto the entire satisfaction of the Engineer-In-Charge of the work

Cost of Ceiling Fans 1200 mm sweep Crompton/ Bajaj/ Orient/Usha or Isi mark approved by PWD with Double ball bearing

Cost of Tube light Philips/ Bajaj/ Wipro/GE or Isi mark approved by PWD 1x28 W Energy Saver

Cost of LED light of Philips/ Bajaj/ Wipro/GE or Isi mark approved by PWD 1x18 W Energy Saver

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station/Goods transport PWD store to the site of work.

Cost of Exhaust Fans 1500 mm Crompton/ Bajaj/ Orient/ or Isi mark approved by PWD heavy duty

Supply and erection of Fittings and Accessories (XI) Bakelite angle/straight button holder Large size.

Supply & erection of double door sheet steel enclosure distribution board suitable for MCB's and ELCB's etc. reccessed in wall i/c bounding to earth with all labour & material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the work. 8-way, SP&N (Horizontal)

P & F of IP 66 protected High Power LED Flood Light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to acheive various beam angles, System power 40W - 60W 240V, 50 - 400 Lumens system output of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (Price to be quoted with light fixture). System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Red, Green, Blue, Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and KEMA compliance and fitted with powder coated 1.5 m long MS bracket and fastened towall with anchor bolts ,complete item in all respects High Power LED Flood Light 120 W

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Bullet/ Box Camera, 1/2.7" CMOS, 2 MP @ 25fps or better, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 5–50 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant. Make Honeywell or Pelco or Axis conpleted with Industrial grade HUS Network Video Recorder : 16 CH @ 1080P with 2 HDD bays with 1TB, with ethernet port,key board and LED display unit of 40",including installation of wiring and Cat 6 cable required and PVC conduits required in wall and ceiling ,item complete in all respects

Supplying, installing, testing and commissioning of centrifugal submersible sump pumps, suitable for 415 ± 10% Volts, 3 phase/230 ±10% volts 50 Hz A.C. power supply. Each pump shall suitable for automatic/manual operation complete with control panel as per specification.Each pump shall suitable for automatic/manual operation complete with control panel as per specification. Complete item including PVC pipe ,its lowering, contralpanel, switchgear and wiring as per manufacturer specifications Flow rate = 4.0 LPS , Head = 20 Mtrs.

Supplying, installing, testing and commissioning of centrifugal monoblock water transfer pumps to overhead water storage tanks (suitable for positive suction) Flow Rate = 4.00 LPS and Head height 30 Mtrs. Each pump shall suitable for automatic/manual operation complete with control panel as per specification.

SITC of following ratings Silent DG sets comprising of Kirloskar KE CT 63II (63 KVA) make,4 cylinder 84BHP engine ,497 TC74 coupled to 415 Phase Stamford make alternator mounted on a common Base frame along with other accessories and load sharing panel., complete in all respects

Supply installation testing and commissioning of Public address system Server plus two no 15 W Horn Speakers alongwith amplifiers alongwith 2Cx1.5 Sq mm Copper cable .for PA system and 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. Including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work

Supply, installation, testing & commissioning of Photovoltic solar system with solar photo voltic module (120Wp+/-2%), Module mounting structure, Arry junction box, main junction box, solar Cu cables, power conditioning unit with invertor, Dc and AC distribution board, earthing kit, and all accessories as required,. Make Inter Solar/ Moser Baer All items complete in all respects as per already approved DNIT 20KW System

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 for hydrent and sprinkler underground rings including all accessories such as screwed/ welded flanges, tees, reducers etc. Conforming to IS : 1239/3589 complete including , welding, jointing with compressed asbestos gaskets, nuts, bolts etc. as required. with cleaning,wrapping and coating of the pipe with 4 mm thick tar based plymaric corrosion protection tape or equivalent including applying uniform coat of cold pipekot primer as per IS; 10221 for protection against corrsion suitable for all kind of soil at 1.0 M depth including excavation and making good the same as required at site . 150 mm dia

Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, G I bolts, nuts, washers etc. as required. 150 mm dia

Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. 150 mm dia

Supplying, Installation, Testing & Commissioning of Local Fire authority approved Electric Driven Main fire pump for Hydrant applications suitable for automatic operation with 2850 lpm head 7 kg/cm2 as the main pump a longwith pressure switches

Supplying, Installation, Testing & Commissioning of verticalstage jockey pumps with SS body pump for Hydrant applications suitable for automatic operation with 180 lpm head 8.8 kg/cm2 as the main pump a longwith pressure switches

SITC of floor mounted dust and vermin proof compartmentalised cubical type main fire pump house panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade . Side walls and cable arrangement for incomingand outgoing arrangement of MCCB and auto start kit and system controller ,inclusive of PVC conduit and wiring as per system requirement to the complete satisfaction of Fire officer

Supplying and fixing Gun metal single headed Internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Same as above item no 97 ,but double headed hydrant

Supplying and fixing of External Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way (for Drawout )

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 4 Way (forInlet )

Providing and fixing of 4 way suction coupling for fire brigade withdrawal of water from fire tank with 150mm dia pipe and foot valve.

Providing and fixing of 4 way suction coupling for fire brigade withdrawal of water from fire tank with 150mm dia pipe and foot valve.

Supplying and fixing first -Aid hose reel wall mounted swinging type with MS construction spray painted in post office Red, conforming to IS 884 with upto date amendments, complete with the following as required.(A) 30 m long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type -2 as per IS: 12585 (B)20 mm (nominal internal) dia gun metal globe valve & nozzle.(C)Drum and brackets for fixing the equipments on wall.(D) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. pipe

Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS ;926

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size nozzle confoming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required

Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve

Providing and laying of Rainwater harvesting consisting of 3m dia ,3 m depth as per standard code of practice and detailed drawings with lowering of PVC perforated pipe bore of dia 150 mm upto depth of 45 m ,covered with sieve of spun yarn and filter media as per approval ,tank consisting of RCC slab cover with two inspection chambers and silt prefilteration inspection chamber of size 1.2m x 1.2x 0.76 deep ,complete item as per satisfaction of EIC

Plastic Chair good quality As per satisfaction of Engineer in Charge

Almirah Steel (Big) Size: 78"x36"x19", Steel Almirah with 4 shelves making 5 compartments without locker (Texture Finish). Door-20 gauge, Body and Shelves-22 gauge. Electro Plated Handle, latch rod 10mm diameter adjusting strip 1 mm shelf bracket 1.25 mm & pedestal height 125 mm good quality 6 lever lock with duplicate keys.

Almirah Small Size: 50"x30"x17" with 3 shelves making four compartments (Texture finish), Heavy quality, Handle, latch rod 10mm diameter adjusting strip 1 mm diameter adjusting strip 1mm shelf bracket 1.25mm & pedestal height 125mm good quality 6 lever lick with duplicate keys.

File Cabinet four drawer with lock facility Steel Filling Cabinet with steel handle. Side and back in CRC sheets 20-22 guage with 4 drawer spring locking system with enamel paint and top and bottom-0.8mm, lock mechanism shall be of 1.6mm Telescopic slide channels for extra long life and mooth movements fited with brash lock 6 levers, size L54"xW18"xD27" - Powder coated.

Executive table with two side drawer for consultant Executive Table (with one side 3 drawers & other side consist of 1 cupboard) Suitable for demanding needs of modern office. In different combination to suit the size, easily accommodate the electronic equipments like telephone & intercom, fax etc. Box & Panel-22 SWG, Drawer- 24 SWG, Sectional pipe 2" 1-/8" x 1.25 mm with 25mm postformed top with Texture finish. SiZe: 60"x36"x30".

Water Cooler Good Quality, ISI Mark, Reputed brand ( 50 liter )

Dustbin good quality, foot operated, 10 litre capacity

Dinesh Malik