Requirement of control room for centralized monitoring of CCTV, GPS system, Boom Barrier and Weigh Bridges in WCL, Majri Area.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance a 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main I runners of 15x32 mm of length 3000 mm, cross T of size 15x32mrri of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 rtim suspended from ceiling using galvanized mild steel item (galvanised@80gsm) SO mm long 8mm outer diameter M- 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main 'T'. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the well with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre- painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing of UPVC Door and windows 3 track 2 glass panel and 1 mesh panel, including profile colour : white, mesh type: (3) 55 Flymesh, Flymesh sach : SLD sah 36 mm x 75 mm, flymesh sach RI : RI -29.5 mm x (25 mm - 105 mm), Guide rail - Aluminium guide rail (Con-Agl), Interlock - SLD Interlock 41 mm x 30 mm (sliding SASH SLD SASH 36 mm x 75 mm, sliding SASH RI : 29.5 mm x 25 mm - 1.5 mm, Track :- SLD 3 Track 100 mm x 45 mm ; Track RI - RI - 26 mm x 12 mm - 1 mm, with locking arrangement ( multi - point), handle colour - white, flymesh- handle type - 53 - ESPAG, Roller - single wheel with Groove including 5 mm glass clear toughened etc complete as per instruction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

PVC wall panelling at all heights Wood Polyvinyl Chloride (PVC) strong, factory manufactured, lightweight panels in various shapes, designs colours and lengths with hollow core, shiny, smooth exterior, high durability, waterproof, detachable, Termite-proof and Fire-retardent colour coated in Various colours. Thickness of more than 10mm, various lengths to be laid in true vertical level with necessary screw and fasterner, L patti PVC, U angle complete with labour cost transportation all including as per Engineer-in-Charge.