NIT No.116/WBTDCL OF 2025-26 (Technical)

TOTAL QUOTED AMOUNT

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

4 storied Building

Electrical

Supply and fixing of philips Smartbrite Xtra 2ft run length LED Baflen Tube light, 12 watt incl Fixing only fluorescent light fifling suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length

Supply and fixing of GreenLED Ultima Square (6” x 6”) , incl cufling the false ceiling in reqd dimensions also the wiring and connection of the light by 1.5 sq mm cu wire complete. Make : Philips, 10 watt square/ round

Supply and fixing of SkyCove LED Strip Light (5M length) with driver and necessary connection. Make : Philips , LED Strip SKYCove 5M WW with driver

Supplying of approved make high speed ceiling fan (ISI marked) of following sizes having double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts 1200mm

Supplying of approved make wall fan oscillating type with base, blades, guard, speed regulator etc. AC 230- 250 volts. 400mm sweep

Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 150mm sweep RPM 900 / 1400 (6”)

Supply and Installationof Split type room air conditioning machine of following tonnage capacity 3 star rating fifled with rotary crompresser and cooling capacity min. 6000 k cal/Hr., minimum discharge air flow 800cum mtr, 800EER ( W/W) 2.7-2.89. (Rates are inclusive of extra refrigerant pipe drain pipe connecting cable) up to the satisfaction of the EIC. 1.6 Ton (Make : Mitsubishi) 3 star non-inverter type

Supply installation testing and commissioning of following capacity geyser 5 star rated storage water heater with advanced 3 level safety For 25L-capacity

For 10L-capacity

Supply and`Installation of 40-45ltr mini refrigerator of white in color and with direct cooling technology and freezer space as per direction of EIC. Make- LG/ Bluestar/ Godrej or equivalent as per direction of EIC.

Supply of Electric kettle of 1-1.5ltr size of metal body as per direction of EIC. Make- Havells/ Borosil/ Prestige or equivalent as per direction of EIC.

Supply and Installation of 43" LED Smart TV of 4K Resolution and supports Wi-Fi, Bluetooth, HDMI and USB slot with in built memory and stereo/dolby sound with necessary fixing arrangement for mounting in wall as per direction of EIC. Make- Sony Bravia 2 S20/ LG/ Samsung as per direction of EIC.

Supply of Single phase Decorative LED Mirror light of 10W, 3000K, suitable for surface wall mounting as per direction of EIC. Make- Philips/Havells/Crompton.

Supply of Single phase Decorative LED Bed side light of 15W, 3000K, suitable for surface ceiling mounting as per direction of EIC. Make- Philips/Havells/Crompton.

Supply of Single phase 2W, 3000K LED Step Light of Aluminium body, long life LED source as per direction of EIC. Make- Philips/Havells/Crompton.

SITC of 500 LPD Capacity Integreted System Solar Water Heater. Description: Capsul shape Dish end type, Tank Material is Galvanized iron, insulation material should be CFC Free Puf, Inner sealing is Silicon Seal and outer Sealing is EPDM Grommet.(Make Racold or Equivalent as per direction of EIC)

Protection wall

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.7.1 Ordinary rock

PLUMBING/SANITARY WORKS :

Supplying, fitting & fixing CP 3 IN 1 Wall Mixture with spout and with provision for connnection toTelephone Shower of approved make

Supplying, fitting and fixing toilet paper holder of approved make with fittings as necessary.

Supplying, fitting and fixing Liquide Soap Dispenser of Jaquar or Equivalent.

Supplying, fitting and fixing Soap Tray of Jaquar or Equivalent.

SINGLE PHASE SUBMERSSIBLE PUMP SET AS PER LATEST BIS WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS : 8034 ( and as amended thereaiter ) with Standard MOC for potable clear cold water and BEE 3 Star Rated capable of dischargirg noted Cum / hr against head of water column. The pump shall be directly coupled with a continuous rated 2-Pole suitable wet type vertical sqirrel cage induction motor conforming to IS : 9283 (and as amended thereafter) suitable for operation in AC A-C Single phases 220Y, 50H2 (category B motor) (Minimum Bore Well Dia -100 mm, 3 H,P., Head in M - 80.00 M, Discharge in Cum / Hr - 5.00 Com, NRV - 38 / 50 mm,)

SINGLE PHASE SUBMERIBLE PUMP CONTROLLER (Microprocessor Based) WITH WATER LEVEL CONTROL Supply and delivery of direct on line ( DOL) strater panel board confonning to ISl3947 and IEC 947 of suitable HP rating for operation in 230V (+ I }yo) AC , single phase , 0Hzl+5yo) comprising of ammeter, voltnreter, thermal overload relay, 2 pole magnetic contactor with in built water Ievel control, under voltage protection, irrdicating lamp. capacitors, on/off push buttons including 5 way connector, wiring with l/1,5 sq. mm PVC insLrlated copper wire. powder coated vermitr proof box of following capacities:- iv) 3 H.P. (Relay Range 13-22 Amp.)

Supply and delivery of 2.5 m 3 core flat cable or as direction by Engineer-in-charge.

Furniture

Providing & fixing wardrobe made by 19 mm thk. (BWR) ply for top, bottom, vertical support and internal shelf and 19 mm thk. Block board (BWR) for openable shutter and 6 mm thk. Ply (BWR) for backing support. The storage shall have 2nos. Drawer and inside of wardrobe 0.8 mm thk. laminate finish and external area veneer with melamine polish including all hardware fittings complete as per design. Size of wardrobe 4'0" (Length) x 2'-0" (depth) and 7'-0" height. (Basic rate of veneer @Rs.120/- per sft.)

Providing & fixing TV Unit made by 19 mm thk. (BWR) ply for top, bottom, vertical support , shutter and 6 mm thk. Ply (BWR) for backing support. The storage shall have 2nos. Drawer and inside of unit 0.8 mm thk. laminate finish and external area veneer with melamine polish including all hardware fittings complete as per design. (Basic rate of veneer @Rs.120/- per sft.) Size of TV Unit 13'-8" (Length) x 2'-0" (depth) and 2'-0" height.

Providing & fixing luggage rack made by 19 mm thk. (BWR) ply for top, bottom, vertical support and and 6 mm thk. Ply (BWR) for backing support and inside of unit 0.8 mm thk. laminate finish and external area veneer with melamine polish and SS solid bar on top complete as per design. Size of Luggage rack 4'-2" (Length) x 2'-0" (depth) and 1'-6" height. (Basic rate of veneer @Rs.120/- per sft.)

Providing & fixing writing table made by 19 mm thk. (BWR) ply for top, vertical support and and 6 mm thk. Ply (BWR) for backing support and inside of unit 0.8 mm thk. laminate finish and external area veneer with melamine polish and 6 mm thk. clear glass on table top complete as per design. Size of Writing table 4'-0" (Length) x 2'-0" (depth) and 2'-6" height. (Basic rate of veneer @Rs.120/- per sft.)

Providing & fixing dressing unit made by 19 mm thk. (BWR) ply for top, vertical support and and 6 mm thk. Ply (BWR) for backing support and inside of unit 0.8 mm thk. laminate finish and external area veneer with melamine polish and 6 mm thk.mirror complete as per design. (Basic rate of veneer @Rs.120/- per sft.)Size of dressing unit 2'-6" (Length) x 2'-0" (depth) and 7'-0" height.

Providing & fixing headboard panelling made out by wooden frame work with 12 mm thk. Ply (BWR) and foam with leatherite finish complete as per design. Size of head board 6'-6" length and 4'-0" height. (Basic rate of veneer @Rs.120/- per sft.)Size of head board 6'-6" length and 4'-0" height

Providing & fixing bed side table made by 19 mm thk. Ply for top, bottom, shutter and 6 mm thk. Ply for backing support and the unit shall have 1 no. drawer and inside of unit 0.8 mm thk. Laminate finish and out side veneer with melamine polish as per design. Size of side table 2'-0" lenght x 1'-4" depth and 1'-6" height. (Basic rate of veneer @Rs.120/- per sft.)Size of side table 2'-0" lenght x 1'-4" depth and 1'-6" height.

Supplying of single seater sofa made out by hard wood frame work with necessary foam and leatheritr finish complete as per design.

Supplying of centre table made out by wooden frame work for base with veneer & melamine polish finish and 12 mm thk. Clear glass for top complete as per design. Size: 2'-6" x 1'-6". And 1'-6" height.

Size 1'-8"x1'-6" and 1'-6" height

Supplying of wooden chair with melamine polish and fabric finish complete.

Pvc Chair

Providing & fixing bed made out by 19 mm thk. Ply for structure and all external area veneer with melamine polish finish (Excluding mattress, pillow, bed sheet, etc.)

size of mattress 6'-6" x6'-6" for Double Bed

Bed Sheet

Pillow

Pillow Cover

Side Pillow

Side Pillow Cover

Cushion

Cushion Cover

Door Mat

Douvet

Douvet Cover

Hand Towel

Bath Towel

Supplying,fitting and Fixing Curtains with sheer

DINNING TABLE 6 SEATER (2.5x0.9x0.75):WOOD FRAME: 1ST CLASS BEST INDIAN TEAK, PLYWOOD: 19MM BOILING WATER PROOF PLY, VENEER:4MM DECOWOOD CLASIQUE TEAK GREENPLY, FINISH: PU MATT FINISH

RESTAURANT TABLE 4 SEATER (1.2x0.9x0.75):WOOD FRAME: 1ST CLASS BEST INDIAN TEAK,PLYWOOD: 19MM BOILING WATER PROOF PLY,VENEER:4MM DECOWOOD CLASIQUE TEAK GREENPLY, FINISH: PU MATT FINISH.

RESTAURENT CHAIR (0.5X0.5X0.75) :WOOD FRAME: 1ST CLASS BEST INDIAN TEAK,PLYWOOD: 19MM BOILING WATER DROOF PLYVENEER:4MM DECOWOOD CLASIQUE TEAK GREENPLY, FINISH: PU MATT FlNlSH, FOAM PADDING:32AND 40 DENSITY FOAM, UPHOLSTERY: [email protected]/-M (to be approved by the SE,WBTDCL).

Kitchen Equipment

SS304 TANDOOR (GAS CUM CHARCOAL)Top pannel is made up of 16 SWG SS304 & Body pannel is made up of 18 SWG SS304 Sheet.Inner frame work is of MS Angel.The vunit is fitted with 4nos. Heavy duty nylon castor wheels.Inner bodyu is made up of glasswool.Size-30" x 30" x 30".

Mashala table with 2 undar shelve: -The unit shall be made out as per following specification.Top: -304 grade S.S. sheet of 1.2mm thick. shelf: 3O4 grade S.S. sheet of 1.2mm thick Leg: 3O4 trade s. s. pipe of 30mm x30mmx1.5mm Squire. fitted with adjustable nylon bullet feet.Frame: - heavy duty mild steel angle.

Pot rack with 4 shelve: - The unit shall be made oul as per following specification. shelves: -304 Brade S.S. Sheet 1.2mm thickness. Verticals: - 3O4 Srade s. s. square pipe of 40 mmx 4omm x 1.5mm fitted with adjustable nylon bullet feet. Size: 46" long x 24'wide x 66" height.

Storage rack with 4 shalve.: - The unit shall be made out as per following specification. Shelves: -3 04 grade S. S. Sheet 1.2mm thickness. Verticals: - 304 grade s. s. square pipe of 40mm x 40mm x 1.5mm fitted with adjustable nylon bullet feet. Size: 46" long x l7' wide x 66" height.

SS304 SINGLE SINK UNIT WITH BACK SPLASH Top pannel is made up of 16SWG & Bottom pannel is made up 18 SWG SS304 Steel Sheet. Legs are of 1.5" Square Pipe, Inner frame is of MS Angle. Adjustable Nylon Bullet are fitted with legs.Size-24"x24"x34+6

WORK TABLE WITH with two under shelve: - The unit shall be made out as per following specification. Top: -304 grade S.S. sheet of l.5mmthick.Shelf: - 30( Erade S.S. sheet of 1.2mm thick Back splash:'6" hi8h, Leg: - 3O4 grade s. s. pipe of 4omm x 40mm x1.5mm Squire. fitted with adjustable nylon bullet feet. Frame: - heavy duty mild steel angle. Size: 46" long x 24" wide x 34" + 6' height

SS304 TWO BURNER CHINESE RANGE WITH1 STOCK,1 BS & BACK SPLASH Top pannel is made up of 16SWG & Bottom pannel is made up 18 SWG SS304 Steel Sheet. Legs are of 1.5" Square Pipe, Inner frame is of M Angle. Adjustable Nylon Bullet are fitted with legs.Size-66"x26"+ 4" x 34"+18"

SS304 CHAPATI HOT/DOSA PLATE WITH 1BS Top pannel is made up of 16SWG& Bottom pannel is made up 18 SWG SS304 Steel Sheet. Legs are of 1.5" Square Pipe, Inner frame is of MS Angle. Adjustable Nylon Bullet are fitted with legs.Size-36"x26"x34".

Clean dish/plate rack with 4 shelve: - The unrt shall be made out as per followinS specifrcation. Shelves: -304 Brade S.S. sheet of 1.2m thickness Verticals: . 304 grade s. s. pipe of 40x40mm fitted with adiustable nylon bullet feet. Size:46" long x 17' wide x 66' hight

SS304 Four DOOR UPRIGHT VERTICAL REACH IN CHILLER- 1000Litres.MIDDLEBY CELFROST or Equivalent.

SS304 Three DOOR UNDER COUNTER REFRIGERATOR WITH OVERHEAD SHELVES AND HEATE.MIDDLEBY CELFROST or equivalent .Size72"x28" x34" +18" + 15" capasity-500liter.

SS304 Exhaust Hood With Baffle FILTEREntire exhaust hood body will be made of 20 swg.S S-304 Sheet with S.S-304 baffle filters ot 24swg sheet. Grease filters will be grease collection tray.Size: 30"(W)x24"(H)x22'(L) Approx-22Ft

CENTRIFUGAL BLOWER FOR EXHAUST AIR Capacity 9OO0 cfm S.P.' 60mm with 7.5 HP Motor 3 ph 1440 rpm Direct Drive with Double Skin Panel made of aluminum hollow section with 25 mm puff injected pane 0.6 mm pre coated Gl sheet.FAN UNIT Make:NAC or Equivalent.

GI DUC'T TOR EXHATIST LINE: Fabricated Gl Sheet Metal rectangular ducting complete with Nutbolt, Angle suppot, gaskets, , hangers, supports etc. as per approved drawings. Approx. 100 Ft.

AXIAL FIOW FAN FOR FRESH AIR LINE Capacity 1000 cfm with 2 hp motor 3 ph 960 RPM Fan dia-72Ornm . impeller-4 blade,FAN Meke: NAC or equivalent with flexible canvas connection.Approx 100ft.

GI DUCT FOR TRESH AIR LINE: Fabricated Gl Sheet Metal rectangular ducting complete with Nutbolt, Angle support, gaskets, , hangers, supports etc. as per approved drawings. Approx. 100 Ft

Supply air Grills

GAS BANK for 4x2 Cylrn&r Gas manifold system with all fittings Approved. 80 ft

Water Purifier 100 ltr./hr Aquagurd or equivalent.

Water cooler 80 litr + 40 litr Bluestar or eqivalent.

Geyser Big size 50 Litr.

Insect Killer ,Spectrum.

GAS LEAKAGE DETECTOR WITH ALARITI smart Gar Detector 3 or 4 Wire, 4-20mA Output with users Settable Range, for Toxic/Combustible/VOC. Certified lntrinsically Safe., ClMFR, BlS, PESO Tested, Enclosure LM-6 Exd llC 16 Gb. 1P66. EMl & EMC Compliance, Hot Swappable smart sensor,, Calibralion due alart, Alarm lndlcation with Relay O/P, Isolated RS 485 Modbus O/P, 7 segment Diplay

Outdoor illumination

SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. Make- KEI/ Havells/ Polycab or equivalent as per direction of EIC. a) 2 core 6 sqmm

b) 2 core 10 sqmm

c) 4 core 10 sqmm

Supply of Die Cast Al Post top luminaire shall have highly efficient mid power white dimmable LEDs with System lumen output of Minimum 4450 Lumens , and a typical corelated color temperature of 3000K with CRI>70 and lenses with efficient Bat Wing optics designed for efficient light distribution. The Lumens Output of the Fitting shall be of Minimum 4450 Lumens & wattage should not be more than 20W with PDC Housing with LM79 Report from Any NABL Accredited Lab. The Efficacy of Luminaire shall be of Minimum 185 Lumens / Watts at System level after all losses in Order to optimize required PV / Battery Sizing to be design as per 2 nights autonomy along with suitable Dimming profile. Luminaire should be with 12.8V 12AH LiFePo4 battery and 35Wp Mono Panel. External charging port should be provided ensuring easy battery charging for long transpiration / storage. Battery with 2000 Cycles life for ensuring long system life. Life of Product will be 50000 Burning hours life class. Intelligent smart power mode to maximize autonomy. Product Dimensions should be 570*370*180mm & net weight should be 5.4 kg for ease of installation on new Or existing pole structure. Housing color should be Black(RAL9005) IP65 and IK08 for weather resistant and vandal proof installation.The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED. Detailed Technical Specs Reports along with IEC,BIS,EN Standards to be submitted for Technical Evaluation. Signify PHILIPS MAKE Product Model BPP750 LED44 WW AIO Solar Post Top IN Or Equivalent as per meeting Tender Specs.

Supply and fixing of SkyCove LED Strip Light (5M length) with driver and necessary connection. Make : Philips , LED Strip SKYCove 5M WW with driver

Supply and fixing of Town Glow Post Top IP66/IK10 Post Top lantern with symmetric Light distribution complete with all accessories to be fixed on suitable pole incl. bolts and nuts incl making drilled holes etc to fixing up the landscape lighting pole complete. Make : Philips, 50 watt

Supply and fixing of LED Bollard (10wafl) complete with all accessories Make : Philips, 10 watt

Supplying swaged and welded steel tubular pole of following specifications as per IS 2317: 1980) 7m length, 85Kg, 410-SP-03

Supply of CI base plate for overhead MS pole

Supply of CI pole CAP for overhead MS pole

Supply of single arm bracket made of 40mm dia 1.5 meter long

SITC of cubical type floor mounted outdoor Fedder Panel, dust and vermin proof spray powder painted panel board having Bottom Cable entry and suitable Cable alley fixed with railway type locking arrengements suitable for 3 phase,4 wire,50 Hz AC supply made out of 1.6/2 mm thick MS sheet so as to accomodated the following mountings-(Make-Legrand) I/C- 40A FP 'C' curve MCB Busbar- 100/125A 4 bar Al Busbar of suitable size O/G- 1. 4 nos 6-32A FP MCB 2. 8 nos 6-32A DP MCB 1 nos 4 pole power contactor 40A Current rating (L&T) 3 nos Digital timer (L&T) 1 nos 3 pole relay 20A-33A (L&T) 1 set 3 phase indicating lamp (AE) 1 no 3phase Ammeter & 1 no 3phase Volt meter (L&T) 1 no Danger Board Complete with transportation at the site as per direction of EIC.

Substation, LT Dist. & DG Set

Supply, Installation , testing & Commissioning of floor-cum-wall mounted cubical type self supporting compartmentalized with separate bus & cable alleys made of 2 mm / 1.6 mm thick CRCA sheet & angle iron frame supported incl. necy. interconnection by suitable size & grade copper cable / solid link/ flat bar incl. making cable end terminal box float boxes after making drill holes ect. As required incl. painting the panel board by powder coated (RAL 7032)paint as per direction of E.I.C and S & F of the following. (All incoming & outgoing MCCB/TPN(4P) should have both side Spreader Link Rotary Handel & phase indicatir lamp ) having following incoming and out going feeder. (L&T/ Equip) (A) Incoming- 320 A 415 V 4P MCCB 50kA - 1 (one) no. (B) 320A 415V Changeover switch - 1 (one) no (C) 4 bar Al Busbar -415A (D)OUTGOING:- (i)160A FP MCCB 35kA- 1 no (ii) 125A FP MCCB 25kA- 2nos (iii) 100A FP MCCB 25kA- 6 nos (iv)63 A 415 V 4P MCB of Breaking capacity 10kA & C characteristics- 6 (six ) nos. (v) 40 A 415 V FP MCB of Breaking capacity 10kA & C characteristics- 4 (four ) nos. (vi) 32A DP MCB- 4 nos (Make- L&T/eqv) (Test Report has been Required- CPRI or EQV)

Supply, Installation, Testing & Commissioning of 200 KVA CPCV IV+ Silent DG set comprising of M&M make Engine Model H6725G2, 247 BHP @NTP, 1500 RPM, coupled to 200 KVA Mahindra Powerol approved make 3phase 415V, 50Hz Alternator mounted on a common base frame along with other accessories i.e. Fuel tank, with AMF Pannel, battery with leads and acoustic enclosure.(make- Jackson/M&M/Kriloskar as per choice of EIC.)

Supply of Engine oil i.e. Diesel as per direction of EIC.

Supply of ISI marked Armoured Copper Control cable of following size: Make- KEI/Havells/Polycab 12 core 2.5 sqmm

Feeder Pillar SITC of Feeder pillar box, Outdoor type, IP65 protection, MS powder coated (RAL 7032), sheet steel thickness 1.6 mm, Free standing, MS stand with 250A Busbar, 1 no. MFM and R-Y-B phase indicating lamp for easy operation (panel bottom should be 300 mm from Ground level), interconnection, Cabling, Terminals, DIN Rail, cable entry bottom with detachable gland plate, Openable hinged double/single door as per relevant IS with suitable foundation & net cement polising (min 1.5 cum required), having following incoming and out going feeder. (L&T/ Equip) (A) Incoming- 100 A 415 V 4P MCCB - 1 (one) no. (B) 4 bar Al Busbar - 125A (C)OUTGOING:- (i)63 A 415 V 4P MCB of Breaking capacity 10kA & C characteristics- 6 (six ) nos. (ii) 32 A 415 V FP MCB of Breaking capacity 10kA & C characteristics- 2 (four ) nos. (iii) 32 A 415 V DP MCB of Breaking capacity 10kA & C characteristics- 4 (four ) nos.

Supply of XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make - KEI / RR/Havells/ as per choice of EIC]. A) 4 core 16 sqmm

b) 4 core 25 sqmm

c) 3.5 core 50 sqmm

d) 3.5 core 95 sqmm

e) 3.5 core 185 sqmm

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A

Supplying and laying of HDPE pipe of following size as per direction of EIC. 63mm dia

Supply and installation of 2MP IP dome camera, 30Mtr,3.6mm Fixed Lens, nstastream and H.264+ Dual-Stream encoding , IR Range of 30 Mtrs, IP67 as per direction of EIC. Model- CP Plus CP-UNC-DA21PL3/ Hikvision/ Dahua or equivalent as per direction of EIC.

Supply and installation of 2MP IP bullet camera Night Vision Outdoor IR Camera 30 Mtr. with 3.6mm fixed lens- CP-UNC-TA21PL3 as per direction of EIC. Model- CP Plus CP-UNC-TA21PL3/ Hikvision/ Dahua or equivalent as per direction of EIC.

Supply and installation of IP PTZ camera 8 MP, WDR 40x IR Network PTZ Camera- 500 m with 1/1.8 inch Image Sensor, CP-UNP-H4081L50-DRP as per direction of EIC. Make- CP Plus/ Hikvision/ Dahua or equivalent as per direction of EIC.

Supply and installation of 8 port PoE Switch ,8 Port Gigabit + 2 Port Gigabit SFP Layer 2 Managed PoE Switch, CP-ANW-GPM8F2-N12 as per direction of EIC. Make- Tenda/ CP Plus/ Hikvision or equivalent as per direction of EIC.

Supply and installation of 16 port PoE Switch CP PLUS 16EP+2G+1SFP AI PoE Switch, CP-ANW-HP16G2F1-N30 as per direction of EIC. Make- Tenda/ CP Plus/ Hikvision or equivalent as per direction of EIC.

Supply and installation of 24 port PoE Switch CP PLUS 24 Gigabit Port + 2 SFP 10/100/1000Mbps AI PoE Switch, CP-ANW-GPU24F2-N30 as per direction of EIC. Make- Tenda/ CP Plus/ Hikvision or equivalent as per direction of EIC.

Supply and installation of 64 Channel Network Video Recorder (NVR) H.265 4K Upto 12MP NVR CP-UNR-4K664R16-EDV2 as per direction of EIC. Model- CP Plus CP-UNR-4K5644-V2/ Hikvision/ Dahua or equivalent as per direction of EIC.

Supply and installation of 8TB HDD , HAT3310 8TB Plus Series SATA HDD 3.5" (HAT3310-8T)as per direction of EIC. Make- Seagate/ WD/ Toshiba / Synology or equivalent as per direction of EIC.

Supply and installation of 55 inch LED Television set ,139 cm (55 inches) 4K Ultra HD AI Smart LED Google TV for display as per direction of EIC. Make- Sony/ LG/ Samsung or equivalent as per direction of EIC.

Supply and installation of 64port EPABX machine as per direction of EIC. Make- Matrix/ Panasonic/ Syntel or equivalent as per direction of EIC.

Supply and installation of Telephone Set as per direction of EIC. Make- Matrix/ Panasonic/ Beetel or equivalent as per direction of EIC.

Supply and installation of Telephone Set with caller ID and Display as per direction of EIC. Make- Matrix/ Panasonic/ Beetel or equivalent as per direction of EIC.

Supply and installation of Indoor/outdoor Access Point/ router wall/ceiling mounting type as per Indoor/Outdoor WiFi 6 Access Point, 1.8 Gbps, Long Range Coverage, IP67 Weatherproof, OFDMA, MU-MIMO, OMADA Messh direction of EIC. Make- TP Link/ D Link/ Mercusys or equivalent as per direction of EIC.

Supply and installation of 2U Rack for DVR Rack/CCTV Rack/NVR Rack/Server Rack + Transparent Glass Door + Wall Mount + Metal Box - Modular (Value Series) as per direction of EIC. Make- TP Link/ D Link/ Legrand or equivalent as per direction of EIC.

Supply and installation of 4U Rack wall mounting type for CCTV DVR Rack /NVR /Server / Network Rack with 4 Power Socket Plug Transparent Glass Door Metal Cabinet Box (Size 5: 45cm X 55cm X 25cm) as per direction of EIC. Make- TP Link/ D Link/ Legrand or equivalent as per direction of EIC.

Supply and installation of 6U Rack wall mounting type DVR, CCTV, NVR, Server, Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) as per direction of EIC. Make- TP Link/ D Link/ Legrand or equivalent as per direction of EIC.

Supply and installation of 1KVA online UPS,Pure Sinewave with in-Built Batteries (12V 9AHx2) Power Backup & Protection as per direction of EIC. Make- Luminous/ Numeric/ Microtech or equivalent as per direction of EIC.

Supply and installation of online mini UPSBX600C-IN 600VA / 360W, 230V, UPS System, for PoE Switch as per direction of EIC. Make- Tenda/ Luminous/ Numeric/APC or equivalent as per direction of EIC.

Supply and Installation of Media converter Fast Ethernet SFP to RJ45 Fiber Media Converter | Fiber to Ethernet Converter | 10/100Mbps RJ45 Port to 100Base-FX Single-Mode Fiber as per direction of EIC.

Supply of 4 core Optic Fibre Cable as per direction of EIC.

Supply and Installation of Surge Protection Device AC SPD Single Phase 2 Pole 320V Surge Protection Device TYPE 2 as per direction of EIC. Make- Legrand/L&T /Havells or equivalent as per direction of EIC.

Supply and Installation of Krone box Telephone Distribution Box, Junction Box (30 Pair With Krone Module) for suitable distribution of Intercom line as per direction of EIC.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

4 storied Building

Civil

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring

d) Add extra for excavation in morum soil 1) Cutting with chisel

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

(b) Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.

(e) Spot application for insecticides using Aqua base spray for pest (for bugs, cockroaches, silverfish, spider, termites, mosquitoes) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying the emulsified chemical @ 0.5 litres per sq.m. by a hand operated pressure pump on wall surfaces, ceiling, electrical fixture,electrical lines including drilling holes inplaces where source of termite is detected squirting chemical solution into the holes and sealing the holes with cement grout. (Rate is per sq.m. of the floor area while actual work will be all walls ceiling, rack, partition and furniture).

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS code. i) Pakur Variety

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer- in-charge. Consumption of cement will not be less than 450 kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula. In Ground floor & foundation. [Using concrete mixture] Pakur Variety M 25 grade a) In Foundation & Ground Floor

b) In First Floor

c) In Second Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including steel Shuttering (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Ground Floor

First Floor

Second Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge annealed wire / welded for pile cage at every intersection, complete as per drawing and direction.tor steel/ Mild steel ( Tata/Sail/Rinl) a) In Foundation & Ground Floor

b) In First Floor

c) In Second Floor

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

(b) In superstructure, ground floor

c) In First Floor

d) In Second Floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor a) In Ground Floor

b) In First Floor

Extra for using approved H.B netting in every third layer in 16 & 17 of subhead A above in any floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. (i) With 1:6 cement mortar- 20 mm thick plaster a) In Ground Floor

b) In First Floor

c) In Second Floor

(ii) With 1:6 cement mortar - 15mm thick Plaster (a) In Ground Floor

b) In First Floor

(iii) With 1:4 cement mortar - 10mm thick Plaster (a) In Ground Floor

b) In First Floor

c) In Second Floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof i) For roof truss works b) Span beyond 12 Mtr and up to 20.00 Mtr

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr] (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour (a) In Ground Floor

b) In First Floor

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). - Sizes-600 mm x600mm x10 mm with breaking strength >1500 N a) In Ground Floor

b) In First Floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile above 0.09 Sq.m Coloured decorative a) In Ground Floor

b) In First Floor

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] (a) Area of each Granite slab 0.6 to 1.0 Square meter. a) In Ground Floor

b) In First Floor

c) In Second Floor

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (i) Sal : Local. a) In Ground Floor

b) In First Floor

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) - b) 40mm X 6mm, 200mm Length.

Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (viii) 100mm. X 75mm. X 3.50mm.

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete.

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type

Providing and fixing of factory made UPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm.

Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer roultipoint Lock (in door) shall be provided. Window frame shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sa) Louver Window with provision of Exhaust Fan frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm both having wall thickness of 2.3 ± 0.2 mm

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor a) In Ground Floor

b) In First Floor

Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins/ soffit all complete as per the drawing & directions of Engineer-in-charge.

f) Supplying ,fitting & fixing Eco-friendly, Humidity Resistant and Incombustable Light Weight Calcium Silicate board/tiles (Density < 900 Kg per Cu.m.& Sound absorption NRC - 0.1 to 0.75)Conforming to BS 476 (Part IV, VI & VII) of approved design and brand placed in the grid module of size 600mm X 600mm to form a false ceiling, all complete as per drawing & direction of Engineer - inCharge. False ceiling with 15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles False ceiling with 15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (ii) 6mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm

Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens): In ground floor (i) 4mm thick commercial quality

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 xiii) 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II)

Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTME84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (a) Normal Quality : Film Thickness - 1.0 Mil, Glare Reduction > 45%, U factor < 1.15

Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge.

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-inCharge fitted and fixed complete including all incidental charges.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. - One Coat with Solvent based interior grade Acrylic Primer.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) - Luxury Quality.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification In Ground floor: (ii) One coat on new surface

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In Ground Floor:(a) One Coats b) In First Floor

c) In Second Floor

d) 3rd Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer c) Super Protective 100% Acrylic Emulsion. a) In Ground Floor

b) In First Floor

c) In Second Floor

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)

(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr a) In Ground Floor

Electrical

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand) Up to 160A a) 4 way

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Legrand) a) 4 way

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand) a) 2+8 way

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Legrand) a) 100 A

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand) a) 63A FP

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] a) Average run 5 mtr

b) Average run 8 mtr

c) Average run 10 mtr

d) Average run 12 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm)

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

d) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles a)19 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles a) 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: a) 23 cm (9")

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al 23 cm Exhaust fan (9")

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2.5sqmm

b) 4 sqmm

c) 6 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 100 mm dia

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages Solid GI wire No. 8 SWG

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

Staff Dormitory

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.7.1 Ordinary rock (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS code.i) Pakur Variety

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer- in-charge. Consumption of cement will not be less than 450 kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula. In Ground floor & foundation. [Using concrete mixture] Pakur Variety M 25 grade a) In Foundation & Ground Floor

b) In First Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including steel Shuttering (f) 25 mm to 30 mm shuttering without staging in foundation

9 to 12 mm thick approved quality ply board shuttering in any concrete work in ground floor a) In Foundation & Ground Floor

b) In First Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge annealed wire / welded for pile cage at every intersection, complete as per drawing and direction.tor steel/ Mild steel ( Tata/Sail/Rinl) a) In Foundation & Ground Floor

b) In First Floor

Brick work with 1st class bricks in cement mortar (1:6) c) In First Floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in b) In First Floor

Extra for using approved H.B netting in every third layer in 16 & 17 of subhead A above in any floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. (i) With 1:6 cement mortar- 20 mm thick plaster a) In Ground Floor

b) In First Floor

(ii) With 1:6 cement mortar - 15mm thick Plaster b) In First Floor

(iii) With 1:4 cement mortar - 10mm thick Plaster b) In First Floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof i) For roof truss works b) Span beyond 12 Mtr and up to 20.00 Mtr

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr] (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(B) Light Colour b) In First Floor

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). - Sizes-600 mm x600mm x10 mm with breaking strength >1500 N b) In First Floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative b) In First Floor

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] (a) Area of each Granite slab 0.6 to 1.0 Square meter. a) In Ground Floor

b) In First Floor

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(i) Sal : Local.b) In First Floor

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) - 40mm X 6mm, 200mm Length.

Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (viii) 100mm. X 75mm. X 3.50mm.

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete.

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type

Providing and fixing of factory made UPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm

Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer roultipoint Lock (in door) shall be provided. Window frame shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon s a) Louver Window with provision of Exhaust Fan frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm both having wall thickness of 2.3 ± 0.2 mm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (iv) 12mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. - One Coat with Solvent based interior grade Acrylic Primer.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) - Luxury Quality.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification In Ground floor: (ii) One coat on new surface

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC :(b) One Coats b) In First Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer c) Super Protective 100% Acrylic Emulsion.b) In First Floor

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make as per IS: 15965: 2012 and IS: 14246: 2013 (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).

Protection wall

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS code.i) Pakur Variety

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer- in-charge. Consumption of cement will not be less than 450 kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula. In Ground floor & foundation. [Using concrete mixture] .Pakur Variety M 25 grade a) In Foundation & Ground Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including steel Shuttering(f) 25 mm to 30 mm shuttering without staging in foundation Ground Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge annealed wire / welded for pile cage at every intersection, complete as per drawing and direction. tor steel/ Mild steel ( Tata/Sail/Rinl) a) In Foundation & Ground Floor

Pathway and Parking

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

(c) Supplied and laying in the specified pattern of Interlocking Concrete Block Pavement (ICBP) with concrete blocks (with Concrete as specified as per Table-1 of IS :15658 : 2006) manufactured from BIS Licence Manufacturer, with spacer nib (Small protruding profiles on the vertical face of a Paver Block used as a device for keeping minimum joint gap between the Paving Blocks, as per Cl. No. 3.26 of IS 15658) and of specifed size and shape with aspect Ratio (The ratio of length to thickness of a Paver Block, as per Cl. No. 3.3 of IS 15658) as per Table - 2 of IS :15658 : 2006 with flexural strength / breaking load as per Annexure - G of IS 15658 on the prepared Base Course of specified CBR as per Table-1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushing of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per Cl. No. 6.5.1 of IRC SP 63) and filling up the gaps in between Paver Blocks with joint filling sand (grading of the bedding sand as per Cl. No. 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinement of bedding and joint filling sand, compacting, levelling and filling up the edge gap.60 mm thick (ii) Coloured Decorative

Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concreat M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-inCharge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.

Electrical Panel Room

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

(b) Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.

(c) Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)-1981.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS code.i) Pakur Variety

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer- in-charge. Consumption of cement will not be less than 450 kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula. In Ground floor & foundation. [Using concrete mixture] . Pakur Variety M 25 grade a) In Foundation & Ground Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including steel Shuttering (f) 25 mm to 30 mm shuttering without staging in foundation

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Ground Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge annealed wire / welded for pile cage at every intersection, complete as per drawing and direction. tor steel/ Mild steel ( Tata/Sail/Rinl) a) In Foundation & Ground Floor

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

(b) In superstructure, ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. (i) With 1:6 cement mortar- 20 mm thick plaster a) In Ground Floor

(ii) With 1:6 cement mortar - 15mm thick Plaster (a) In Ground Floor

(iii) With 1:4 cement mortar - 10mm thick Plaster (a) In Ground Floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] (a) In Ground Floor

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (i) Sal : Local. a) In Ground Floor

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) - . b) 40mm X 6mm, 200mm Length

Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (viii) 100mm. X 75mm. X 3.50mm.

Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete.

Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm.

f) Supplying ,fitting & fixing Eco-friendly, Humidity Resistant and Incombustable Light Weight Calcium Silicate board/tiles (Density < 900 Kg per Cu.m.& Sound absorption NRC - 0.1 to 0.75)Conforming to BS 476 (Part IV, VI & VII) of approved design and brand placed in the grid module of size 600mm X 600mm to form a false ceiling, all complete as per drawing & direction of Engineer - inCharge. False ceiling with 15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles False ceiling with 15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. - One Coat with Solvent based interior grade Acrylic Primer.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) - Luxury Quality.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In Ground Floor: (a) One Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer c) Super Protective 100% Acrylic Emulsion. a) In Ground Floor

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr a) In Ground Floor

PLUMBING/SANITARY WORKS :

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(iv) Bestolite (solid type) white

Suppling and fitting and fixing Wall mounted water closet of glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to code no.20061 or 92065 &Model studio or Rubbic of Hindware or equivalent)( This item to be executed on specific permission of superintending Engineer)

Suppling and fitting and fixing Concealed Cistern of approved make with flash plate cute/Loop/shell/nova/(Code No. concealo-H(80mm Body sap code 808179 of Hindware or equivalent, matt / gloss)

Suppling and fitting and fixing wash basin vitreous china of approved make (with fittings ) supplied ,fitted and fixing in position on 75mm X 75mm X 75 mm wood block and C. I brackets including 2 coat of paint of C I Brackets (iii) 630 X 450 mm Size

CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting and fixing pillar cock of approved make c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).

Supplying fitting & fixing waste fittings complete.(ii) 32mm C. P. Over Brass

Supplying fitting & fixing complete Bottel waste Trap (heavy quality) (a) Chromium plated Bottle trap 32mm with 190mm long connecting pipe and wall flange (equivalent to Code No. 545 & Model - Tropical/ Sumthing Special of ESSCO or similar brand)

Providing & fixing in position Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or simila

Supplying, fitting and fixing liquid soap container. (a) Cromium plated.

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Providing & fixing of Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (ii) 25 mm dia. and 600 mm long

CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting and fixing shower of approved brand and make. Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).).

Supplying, fitting and fixing shower of approved brand and make. Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing shower of approved brand and make. (iii) Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing C.I. round grating.(100mm)

Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.

(e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).

Supplying, fitting and fixing C.P. Extension Pipe

Supplying, fitting and fixing C.P. Wall Flange

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(b) Sink with drain board 1050 mm X 450 mm X 180 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long

Supplying, fitting and fixing bib cock or stop cock.(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-1115 mm dia (for concealed work)

20 mm dia (for concealed work)

32 mm dia (for exposed work)

50mm dia (For exposed work )

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work 50 mm

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc.fitted including cost of all materials, jointing materials,cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC pipe(dia) 32 MM

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Li) Nahani Trap 90 mm

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (Q) Ball Valve 20 mm

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(iv) For 50 users

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials i) With Pakur variety. (SAIL/TATA/RINL)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 2000 litre capacity

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity.Upto 3rd Floor

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer d) 2000 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty)conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fittedwith holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointingmaterialsandtwocoatsofpaintingwithapprovedpaint inanypositionaboveground. (Paymentwillbemadeonthecentre line measurements of total pipe line including all specials. No separate paymentwillbemadeforaccesories, specials.Payment forpaintingwill be made seperately) a) For Exposed Work PVC Pipes (Dia) 50 mm

Fencing

Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)

Outdoor illumination

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm)

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20mm size

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) For 2 core upto 6 sqmm

b) For 2 core upto 10 sqmm

c) For 4 core upto 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : a) 2 core 6 sqmm cable

b) 2 core 10 sqmm cable

c) 4 core 10 sqmm cable

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 50 mm dia

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages Solid GI wire No. 8 SWG

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole a) 1st coat of aluminium paint over 1 coat of RO priming

b) 2nd coat of aluminium paint over 1st coat

Substation, LT Dist. & DG Set

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/8 stranded GI (Hot Dip) wire (4 Mts. long), 25 mm dia x 150 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) For 4 core upto 16 sqmm

b) For 4 core upto 25 sqmm

c) For 3½ core upto 50 sqmm

d) For 3½ core upto 95 sqmm

e) For 3½ core upto 240 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : a) 4 core 16 sqmm cable

b) 4 core 25 sqmm cable

c) 3½ core 50 sqmm cable

d) 3½ core 95 sqmm cable

e) 3½ core 240 sqmm cable

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Siemens) 315/320A

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars 415 V, 415 A

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (HPL) 320A

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. A) 80 mm dia

b) 100 mm dia

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 Way

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A SP

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm)

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works a) 20mm size

b) 25mm size

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2.5sqmm

b) 4 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 50 mm dia

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole a) 1st coat of aluminium paint over 1 coat of RO priming

b) 2nd coat of aluminium paint over 1st coat

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 8 SWG

Sub Total

Add GST @18% .

Sub Total

Add labour welfare Cass @ 1%

Please Enable Macros to View BoQ information