Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹42.7 L+₹9.8 L (29.6%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹44.2 L+₹11.2 L (34.1%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹47.9 L+₹15.0 L (45.4%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹59.1 L+₹26.2 L (79.4%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
PROVN OF CERTAIN LBW AND MINOR WORKS UNDER AOR OF GE CENTRAL KIRKEE
2022_MES_558671_1
8696/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
150 days
CAFVD and Sarvatra vihar area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹99,000
Yes
26 Nov 2022
19 Oct 2022
16 Nov 2022
19 Oct 2022
14 Nov 2022
2 Nov 2022
19 Oct 2022 - 1 Nov 2022
Amount
Surface excavation in any type of soil n.exc. 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. or for shaft,well, cesspits, manholes, pier holes etc. n exc 10sq.m on plan and getting out in any type soil complete all as specified and as directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc n.exc 10 sqm on plan and getting out in soft disintegrated rock complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc n.exc 10 sqm on plan and getting out in hard rock complete all as specified and directed.
Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick complete all specified and as directed.
Returning, filling in soft disintegrated rock, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick complete all specified and as directed.
Removing excavated soil to a distance n. exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point complete all as specified and directed.
Material and labour Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and as directed.
Material and labour 75mm thick Plain Cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as as specified and as directed.
Material and labour RCC (nominal mix) type A1 (1:1/2:3) 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as as specified and as directed.
Material and labour RCC nominal mix (1:1/2:3) type A-1 (using 20mm graded stone aggregates) in Columns, pillars, piers, posts and struts complete all as specified and as directed.
Material and labour RCC nominal mix (1:1/2:3) type A-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressumers, lintel bands, lintels over 1.5m span, etc complete all as specificed and as directed.
Material and labour RCC nominal mix (1:1/2:3) type A-1 (using 20mm graded stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as as specified and as directed.
Material and labour stell form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation plinth beam and similar work vertical or bottom rough finished surfaces of concrete in flat and curved surfaces complete all as specificed and as directed.
Material and labour Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat rough finish surfaces.
Material and labour steel form work to sides and soffits of floor or roof beams, beams haunching, girders, bressumers, lintels, cantilevers shelves including supports overhangs etc, also splays between floors and beams etc flat rough finished surface complete all as specificed and as directed.
Material and labour steel form work to sides of pillars, posts, struts, piers, columns rough finished surfaces square, rectangular or polygonal complete all as specificed and as directed.
Material and labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to grade of steel Fe 500D complete all as specified and directed.
Material and labour TMT Mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to grade of steel Fe 500D complete all as specified and directed.
Material and labour TMT bars 5mm dia and over cut to length bend to shape required including cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binders complete all as specificed and as directed.
Material and labour rendering 10 mm thick on brick walls or concrete surfaces of wall in CM 1:6, finished even and smooth without using extra cement complete all as specificed and as directed.
Material and labour rendering 15mm thick in CM (1:4) on external surfaces of walls, concrete block masonry & top surfaces of RCC chajja/roof mixed with waterproofing compound at the rate of 2% by weight of cement and finishing even and smooth without using extra cement complete all as specified and as directed. (WPC shall be measured and paid seperately)
Supply only approved integral liquid water proofing compound complete all as specified and as directed.
Material and labour 5mm thick rendering on concrete surfaces of ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specificed and as directed.
Supply and fix solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and as directed.
Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
Supply and fix aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.
Supply and fix for aluminium handles size 150 mm cast type anodised complete all as specified and as directed.
Supply and fix 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
Material and labour Glazed ceramic colour tiles in vertifical surfaces 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting / backing coat in cement mortar (1:4 ) all as specified and as directed.
Supply and fix 1000 litres capacity rotational moulded, polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and as directed.
Supply and fix 20mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe. (Minimum weight 15mm-142gms/ 20 mm - 210 gms . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.
Supply and fix Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Supply and fix Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors or laid in trenches complete all as specified and as directed.
Material and labour vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs complete all as specified and as directed.
Supply and fix Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and including connection to trap and to flushing pipe, antisyphonage pipe all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete all as specified and directed.
Supply and fix PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix Vitreous China China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
Material and labour Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.
Material and labour Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.
Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No 9302 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix bib taps fancy type 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 7306 Tranquil series or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix angle stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore all as per Prayag Cat No 7310 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 20mm bore complete all as specified and as directed.
Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Material and labour Swivel shower 75mm of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) alongwith Shower arm 15 mm size, 225mm long with bend with flange of PTMT any colour (Minimum weight 40gms) all as per Prayag Cat No 181-C or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Material and labour preparing new plastered surfaces of walls and applying evenly three coats of white wash complete all as specified and directed.
Material and labour applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specificed and as directed.
Material and labour preparation of newly plastered surface of wall and applying two coats of water proof cement base paint over a coat of alkali resistant primer complete all as specified and directed. (Note : Curing of the Cement base paint shall be done as per the manufacturers instruction)
Material and labour Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Material and labour for Hardcore of broken stone or boulders gauge n exc 63mm, deposited spread levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M& L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed to drain pipe 150 mm bore including forming cradles complete all as specified and as directed.
Material and labour 150 mm dia (internal dia) RCC hume pipe class NP-2 laid and and jointed complete with collers complete laid in trenches and tested complete all as specified and as directed.
Material and labour Precast RCC cover slab (1:2:4), type B1(using 20mm graded stone aggregates) for manholes, landings, chajjas,water troughs,hangers, shelves and similar articles with plain faces set in CM (1:6) complete all as specified and as directed.
Material and labour PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs, water troughs, surface channels and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed.
Supply and fix gun metal gate valve with iron wheel head, screwed both ends for iron pipes 20 mm bore complete all as specified and directed.
Material and labour walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.
All as per SI Item No.59 above, but except stone complete all as specified and as directed by the Engineer-in-Charge.
Removing Cement or cement lime mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and as directed by the Engineer-in-Charge.
Extra over sand stone or lime stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.40mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed by the Engineer-in-Charge.
Material and labour Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strength of block should be 5 N/sqmm as in walling set in cement mortar (1:6) complete all as specified and as directed.
Material and labour for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and as directed.
Supply and fix rolled mild steel as in posts and struts, angle iron in fencing including cutting tops to shape as directed drilling holes notching for wire etc & flat iron fillets (for securring wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
Material and labour preparing new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying evenly two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Supply and fix Glavanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc complete all as specified and as directed.
Supply and fix concertina coil made to shape as dia exc 750 mm but not exc 1050 mm put on top of wall in between 'Y'shape angle iron post and secured with necessary binding wire all as specified and directed by Engr-in-charge (Note - Weight per RM as laid shall be fixed by board of offrs)
Material and labour Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
Material and labour 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in sub base complete all as specified.
Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base course complete all as specified and as directed.
Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
Supply and fix PVC (SWR) pipes, type 'B' 110 mm bore, single socketed, in any length with rubber ring joints, fixed to wall or in floors etc complete all as specified and directed.
Supply and fix PVC (SWR) pipes, type 'B' 75 mm bore, single socketed, in any length with rubber ring joints, fixed to wall or in floors etc complete all as specified and directed.
Supply and fix 110mm bore type 'B' PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
Supply and fix PVC (SWR) bends of any radius with access doors 110 mm bore/dia type 'B' complete all as specified and as directed.
Supply and fix PVC (SWR) bends of any radius with access doors 75 mm bore/dia type 'B' complete all as specified and as directed.
Supply and fix 75mm bore/dia PVC cowl type 'B' all as specified and directed.
Supply and fix 110mm bore/dia PVC cowl type 'B' all as specified and directed.
Supply and fix 75 mm dia of outlet PVC (SWR) floor trap type 'B' , plain with grating including jointing with solvent cement complete all as specificed and as directed.
Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc and making good the jambs and painting with paint should match with the existing suface complete all as specified and as directed.
Supply and placed on site hume pipe septic tank of size internal dia 900mm and length 2430mm designed to carry sewage and sullage water, with and including excavation in any type of soil or hard/soft rock, PCC (1:4:8) below foundation, vent shaft, connection etc.complete all as specified and as per TD No. CEPZ/91/TD/47M dt 10.04.2003
Material and labour for soakage well of size 1.20 mtr dia x 3.0 mtr effective depth of excavation, in any type of soil, PCC(1:4:8) in foundation, walls of honey combed Brick masonry with top ring of RCC including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC (1:1/2:3) cover slab / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as speified and as shown in drawing No.CEPZ/2019/TD/03 Sheet 1/2 and 2/2 dated 30.04.2019 and as directed by Engr-in charge.
Material and labour Cutting CI/DI pipe 40 to 150 mm in position and Supply and fixing new CI/DI Tee or any connection of respective size complete all as specified and directed.
Demolition of brick /stone/block walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for Brickwork with fly ashbricks, straight or curved on plan exc 6m mean radius, Modular bricks in cement mortar 1:4 complete all as specified and as directed.
Material and labour PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified and as directed.
Material and labour 300 mm dia (internal dia) RCC hume pipe class NP-2 laid and and jointed complete with collers complete laid in trenches and tested complete all as specified and as directed.
Labour only for cutting existing bituminous road or concrete road by chiseling or excavation for laying of RCC NP-2 pipe of any dia upto 300mm bore and removing excavated material in low lying area complete all as specified and as directed.
Material and labour for Soakage well of size 3.00M diaX 4.5M effective depth excavation, in any type of soil, PCC in foundation, walls of honey combed Brick masonry with top ring of RCC including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC (1:1.5:3) cover slab / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as speified and as shown in drawing No.CEPZ/2019/TD/03 Sheet 1/1 and 2/2 dated 30.04.2019 and as directed by Engr-in charge.
Material and labour for point wiring in PVC casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sq.mm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sq.mm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and including PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.
All as per Srl item No 93 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.
All as per Srl item No 93 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.
Supply and fix switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed.
Supply and fix socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified & directed
Supply and fix ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified & directed.
Supply and fix connecting up to existing/new ceiling rose and testing industrial box type batten with precoated CRCA body. LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser ,LED lamp efficay -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9 including connecting all as specified & directed. MAKe :- Crompton Cat No-IGP161LT8-16 & LT8-20-865 or techno commercially equivalent models specified in PS.
Supply and fix New LED Light Fitting 72 Watts road lighting luminaire having system lumen of >110lumen/watt, IP 65/66 protaction with high power LED with PDC Aluminium body& secondary optical lenns for better light ditribution complete all as specified and as directed by Engineer-in-Charge.
Supply and fix connecting in at any height up to existing/new ceiling rose and testing LED batten with 12 W LED 2 feet light source in integral module with polycarbonate/Acrylic diffuser more than 85%efficiency of light with LED lamp efficay as 100 Lum/W THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9, connecting complete all as specified and as directed.
Supply and fix Exahust fan 300 mm sweep with louvers, heavy duty, metalic body, AC, single phase 230 volts with complete with accessorese all as directed by Engr-In-charge.
Supply and fix MCB Distribution Boards SPN 8 Way, factory fabricated complete alongwith Busbar, Neutral Link and Earth Bar, without MCBs all as directed by Engr-in-Charge.
Supply and fix MCB's 240V confirming to IS of rating 6 to 32 A SPN 10 KA breaking capacity complete all as directed by Engr-in-Charge.
Supply and fix MCB's 240V confirming to IS of rating 6 to 32 A SP 10 KA breaking capacity complete all as directed by Engr-in-Charge.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core.
Plain cement concrete, (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation for filling in, mass concrete for foundation of pole, transformer, panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and as directed.
Material and labour for design, fabrication, installation ,testing and commisioning of totally type tested as per IEC 61439-1 and 2 with short time current withstand capacity 110KA, factory made LT main panel board epoxy powder coated with the following minimum specifications:- (a) Fabricated out of 3.00 mm thick CRCA sheet for outer body, front and rear outer doors and 2mm thick CRCA sheet for all internal partition walls, inner cabinet doors , inner covers. (b) Panel shall be fabricated as per ( minimum) IP 54 grade protection. (c) Neutral andised Aluminium busbar with coupler of size and capacity to carry 1.5 times Amp rating of incoming MCCB. (d ) All connections from busbar to MCCB shall be made with suitable lugs. (e) All connections from MCCB to cable trays shall be made with suitable lugs and capacity to carry 1.5 times rating of outgoing MCCB. (f) MCCB busbar, cable trays, metering eqpt shall be housed in independent cabinet with cabinet doors. (g) Panel shall be padestal mounted and to be grouted in PCC (1;3;6), type C2 and mounting frame should below 300 mm from GL and 500 mm above from GL. Contd.. 109
Material and labour for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6 sq.mm (nominal area) drawn through in and including PVC casing caping/PVC conduit of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 6 sq.mm as earth lead and connected to earth dolly including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed. NOTE :- Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
All as per Sl Item No 110 here-in-before but cable of size 10.0 sq.mm all as specified and as directed.
Material and labour for surface sub main wiring with four single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH Copper conductor cable of size 6.0 sq.mm (nominal area) drawn through in and including PVC casing caping/PVC conduit of suitable size with all fittings and accessories alongwith two single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6.0 sq.mm as earth lead and connected to earth dolly including dismantling / taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed. NOTE: - Four run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
All as per Sl Item No 112 here-in-before but cable of size 10.0 sq.mm with 10 sq.mm green colour single core cable as earth lead all as specified and as directed.
S S CONSTRUCTION COMPANY
M/S JAYCONSTRUCTION CO
Aishwarya Constructions
S.R.M.K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .