SPECIAL REPAIR TO TOILETS IN BLDG NO P-05 AT RAMBAN AND SPL REPAIR TO SECURITY WALL/COMPOUND WALL AT UPPER GUND UNDER GE (I) 873 EWS

Amount

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), complete all as specified and directed.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1 :4 in HALF BRICK wall, complete all as specified.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Glazed ceramic tiles, coloured of size 200mmx300mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre each including taking out hold fast complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete all as specified and shown in relevant drg

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & shown in relevant drawing of item No. 08101 in MES Schedule (Part-II) all as directed by Engineer-in-Charge.

Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

Aluminium anodised, barrel tower bolts of extruded section of size 100mm ISI marked and fixed, complete all as specified and directed.

Aluminium handles, fabricated type, anodised of size 100mm and fixed, complete all as specified and directed.

Sheet glass ordinary quality, 3mm thick, fitted with snap bedding rubber gasket/oil putty or wooden beads in squares not exceeding 0.50 Square metre in each pane, complete all as specified.

Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repair, complete all as specified.

Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, 5 ltr cast iron automatic flushing cistern including bracket, flush pipe including 32mm bore PVC waste pipe, fixed in repairs, complete all as specified.

Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia, fixed in repairs, complete all as specified.

Bib taps 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop valve/angle valve ,cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Stop valve/angle valve ,cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Steel ventilator with centre hung shutter including hinges, steel peg stay, complete all as specified.

Grating square 150 mm size of PTMT (Minimum weight 100gms), fixed in repairs, all as specified and directed.

Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified.

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, hoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specifed.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor as soil pipe(vent pipe), complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore, complete all as specified.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/wall as soil pipe(vent pipe), complete all as specified and directed.

PVC (SWR) bends any radius 75mm bore, complete all as specified.

PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement, complete all as specified.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 300gms), complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified.

Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, GI, medium grade, 32mm dia waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts including dismantling of existing water tank, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and complete all as specified and directed.

15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and complete all as specified and directed.

20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified.

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15 mm thick on other than fair faces of brick work or stone masonary surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces/ ceiling surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of oil bound distemper over a coat of primer over a coat of wall care putty 2-3mm thick, complete as specified and directed.

75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses BUT EXCEPT STONE, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses BUT EXCEPT STONE, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.

PCC 1:3:6 (nominal mix), type C-1 using 20mm graded crushed stone aggregate as in precast bond stones, set in cement mortar 1:6, complete all as specified & directed.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40mm, complete all as specified & directed.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified.

Plain cement concrete1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Mild steel work as in hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screqing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 all as specified.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in fixing of angle iron posts, all as specified and directed by Engr in Charge

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified.

Dismantling of fencing wire mesh, any type, complete all as specifed.

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified. (each line wire to be measured)

Concertina coil 600 mm dia, 56 loops, 2.5mm core wire, heavy gavanised (wire-275 GSM & strip-200 GSM), tensile strength of wire-1400-1500 N/Sqmm, weight 6-8Kg/coil, stretchable length- 6m to 8m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete, all as specified and as directed. Make: M/S Global Engg/ M/S Special steels Ltd/ M/S Super Fence/ A1 Fence.

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as required at site including its fittings and fixtures such as ties, bends, elbows and junction boxesetc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

PVC rectangular block for mounting switches, sockets, fan regulator etc. With 3mm th plastic laminated sheet cover of size 250mm x 200mm x 50mm deep all as specified and directed.

Lamp holder, insulated body, with back plate for batten fittings, complete all as specified.

Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed.

Wall surface mounted tube light fitting 18/20 watt LED with electronic driver and extrude aluminium heat sink integrated polycarbonate LED channel with white acrylic cover and including 1X18 watt LED tube rod and complete accessories , internally pre- wired including connection cable of copper conductor size 3-core ,23/0.0076 passing through PVC flexible conduit from ceiling rose to light fitting connector complete all as specified and as directed by Engineer-in-Charge. Make :- CROMPTON Cat No LCTL-18-CDL OR HAVELL's Cat No LHEXBLP7UN1W018 OR BAJAJ Cat No BLRBDB118

Surface mounted LED bulk head light fitting 9/10W, IP66, operating voltage 220-240 V in high pressure die cast aluminum housing in polycarbonate cover with clear prismatic diffuser and lamp holders etc complete with all accessories connected with twin core twisted flexible copper wire of suitable size, complete all as specified & directed. Make: Crompton Cat Part No. LBHP-10-CDL or equivalent in models of Philips/Bajaj/Wipro/GE/Surya

Exhaust fans (metal body) AC single phase 230/ 240 V of size 450 mm sweep 900 RPM with louver including cutting of hole of adequate size including making good existing surfaces with and including fixing with MS fasnut all as specified and directed Make- Havells model Turbo Force or equivalent in Crompton/Bajaj

LED light fitting mirror type with output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Ceiling rose surface type, bakelite 65mmx50mm, 3 terminals, complete all as specified.

Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA 240 Volts, 'C' Series, complete all as specified and as directed.

MCB SPN 32 Amp 10 KA 240 Volts, 'C' Series, complete all as specified and as directed.

1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 10 sqmm stranded conductor, including taking down old unserviceable service connection complete complete all as specified and directed.

Earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire with Gi protection pipe upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

M/S Mohd Saleem Wani and Sons

Bidder Name

M/S Mohd Saleem Wani and Sons

M/S BILAL AHMED WANI