PERIODICAL SERVICES TO VARIOUS BUILDINGS OF COD DEPOT AND COD LINE AREA AND RP COLONY AREA UNDER AGE B/R-I OF GE (W) AGRA

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr.- in- Charge.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed by Engr.- in- Charge.

M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth complete all incl water proofing compound all as specified and directed. (Note : WPC shall be measured seprately)

Material and labour for Rendering 10 mm thick plastering in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr.- in- Charge.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 1mm thcik wall interior wall care putty and a coat of primer.complete all as specified and directed by Engr.- in- Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of 1mm thick water proofing wall care putty at any height (n.exc 11m) incl necessary scaffolding /Centreing etc complete all as specified and directed by Engr.- in- Charge.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed by Engr.- in- Charge.

Supply only intergral water proofing compound ,complete all as specified and directed by Engr.- in- Charge.

Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping, washing,rubbing down and stopping of distempered and painted surfaces make surface clean, free from dust,loose paint etc by skilled labour complete all as specified and directed by Engr.- in- Charge.

M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr.of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 Its per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Note: (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by /Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (c) Masking of window/doors during spray painting using polythine film will be included. (d) Cleaning and clearing site of paint, mats etc. included.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted) 10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray Machine of paint application with a flow speed of min 1 It per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coatscomplete all as specified and directed by Engr.- in- Charge. Note :- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manutacturer of which the materials .i.e. Paint, Distemper, Putty etc, is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved Colour with silicon additive & Colour stay Technology. Excellent Dit Pick up resistance With low VOC less than 50 gram/ lite as per the LEEDS specifications, Anti Algal Properties in two coats @ 1.79 Itr (undiluted)/ 10 sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ir per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note:- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item.

M & L for Preparation of old plastered surfaces of walls including brooming , scrapping down. Smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks by applying putty in patches as required and applying one coats of cement base paint with fully automatic airless spray machine of paint application with a flow speed of min 1 lts per minute having a pressure including at any height (not.exc 11mtr )incl necessary scaffolding /Centreing etc ccomplete all as specified and directed by Engr.- in- Charge. Note:- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item.

M& L for complete removal of existing treatment old plastered or unplastered surfaces including 1mm thick water proofing wall care putty and preparation surface of wall and applying two coats of cement base paint (snowcem) fully automatic airless spray machine of paint application with a flow speed of min 1 lts per minute having a pressure including at any height ((not.exc 11mtr )incl necessary scaffolding /Centreing etc complete all as specified and directed by Engr.- in- Charge.

M & L for applying one coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or unplastered surfaces of walls or concrete including preparation of surfaces at any height (not.exc 11mtr) incl necessary scaffolding /Centreing etc complete all as specified and directed by Engr.- in- Charge.

M & L complete removal of Acrylic weather proof Exterior paint (Apex paint) for applying two coats of Acrylic weather proof Exterior paint (Apex paint) on walls or concrete including preparation of surfaces at any height (not.exc 11mtr) incl necessary scaffolding /Centreing etc complete all as specified and directed by Engr.- in- Charge.

Preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper complete all as specified and directed by Engr.- in- Charge.

M & L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of mm 1 thick wall care putty complete all as specified and directed by Engr.- in- Charge.

M& L for complete removing of old plastered or unplastered surface of ceiling and applying two coat of white wash on ceiling surface complete all as specified and directed by Engr.- in- Charge.

M&L Preparing old surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed by Engr.- in- Charge.

M&L Preparing old plastered or unplastered surfaces and applying one coat of white wash on wall surfaces complete all as specified and directed by Engr.- in- Charge.

M&L Preparing old plastered or unplastered surfaces and applying two coat of white wash on wall surfaces complete all as specified and directed by Engr.- in- Charge.

M&L for preparation of old painted steel surfaces & applying one coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth complete all as specified and directed by Engr.- in- Charge.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr.- in- Charge.

Writing letters or figures ( Block, Roman, Italic or Indian) 10cm height complete all as specified and directed by Engr.- in- Charge.

Writing Stops, commas, short lines, dashes, hyphens, brackets etc. complete all as specified and as directed by Engr.- in- Charge.

Clearing of shrubs growth and trees on bldgs wall, chajja, and making good the damaged protion in CM 1:3 and match the existing surface complete all as specified and directed by Engr.- in- Charge.

M & L interior waterproofing coating on plastered surfaces for water proofing for Mild seepage on walls, groung water rise, plaster level moiture and applying with Smart Care Hydriloc or approved equivalent as per manufacturer instructionscomplete all as specified and directed by Engr.- in- Charge. Note:- (a) For Item No _01_ to _17_ All the Materails to be Brought by Contractor and store in one place as per direction by Engr-in charge/GE. Store will be issued to Contractor as per Site requirement for execution. (b) Every stage of painting to be passed by Engr-in charge before proceeding second coat/subsequent coats . (c) Building haight up to 12.00 M.

M/S ADITYA ENTERPRISES (BID ID -3141223)

Pushpendra Construction (BID ID -3137882)

jmd engineers (BID ID -3136350)

Afghani Constructions (BID ID -3139372)

M/S Chadha Brothers (BID ID -3141158)

M/s J S & SONS (BID ID -3141153)

M/S A A DRILL EXPERT (BID ID -3140848)

M/s Kok Singh Sisodia (BID ID -3140674)