REPAIR TO JOINERY FLOORING AND ALUMINIUM WORK AT NIWARU MIL STN UNDER AGE I P NIWARU

Amount

Taking down chowkats or frames, area not exceeding 1.5 Sqm each and removing from site , complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames, area exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site, complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed by Engr-in-charge.

Dismantling of boardings of any description, fixed in any position and height, fixed with screws, complete all as specified and directed by Engr-in-charge.

Cutting holes in concrete block masonry built in cement mortar for inserting hold fasts and making good dismantling portion in CM (1:3) or PCC (1:2:4) as required exceeding half brick but not exceeding one brick., complete all as specified and directed by Engr-in-charge.

M&L for 2nd class hard wood, plain, solid, straight chowkats or frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed by Engr-in-charge.

S&F Pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate, complete all as specified and directed by Engr-in-charge.

S&F MS hold fasts, cleats and similar small articles, confirming to Fe-410-0 or Fe-310-0 of FI 25 x 3 mm thick and 250 mm long., complete all as specified and directed by Engr-in-charge.

M&L for preparing surfaces of small steel articles such as hold fasts etc area not exceeding 0.10 Sqm each with tar or black paint.

S&F Factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 18/19 mm thick pre laminated particle board, interior grade, pre laminated one side with decorative choice lamination & other side balancing white lamination as cupboard shutters, fixed with screws to timber frame work including beading and taking down above existing , complete all as specified and directed by Engr-in-charge.

S&F for 18/19 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive as cupboard boarding fixed with screws to timber frame work. position/height , complete all as specified and directed by Engr-in-charge.

S&F MS butt hinges 100 mm long, medium weight cold rolled, fixed to MS frame work of doors, complete all as specified and directed by Engr-in-charge.

Ditto- all as per item No 13 above but 75 mm long for windows, complete all as specified and directed by Engr-in-charge.

Ditto- all as per item No 13 above but 50 mm long for fixing of door/windows cleats, complete all as specified and directed by Engr-in-charge.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised , complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodized barrel tower bolts of extruded section and fixed of 150 mm long., complete all as specified and directed by Engr-in-charge.

Ditto- all as per item No.17 above but 200 mm long.

S&F extruded aluminium alloy handles, fabricated type anodized of 150 mm long., complete all as specified and directed by Engr-in-charge.

Ditto- all as per item No 19 above but 125 mm long.

S& F in repair Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-charge.

S&F in repair Brass, sliding door bolt 250mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed by Engr-in-charge.

Re-Fixing of shutters of any description exceeding 1 Sqm but n exc 2 Sqm each in same opening including taking down easing and adjusting and also refixing builders hardware as required including renewal of unserviceable crew etc., complete all as specified and directed by Engr-in-charge.

Taking down and refixing shutters of any description not exceeding 1 sqm each in same opening and also refixing builders hardware as required including renewal of unserviceable screw etc complete all as specified and directed by Engr-in-charge.

Resecuring or easing, refixing and adjusting including taking down steel shutters exec 2 Sqm each, complete all as specified and directed by Engr-in-charge.

Welding in repairs exc 2.5 cm but n exc 5 cm in length including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exc 3mm thick., complete all as specified and directed by Engr-in-charge.

S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed, complete all as specified and directed by Engr-in-charge.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification, complete all as specified and directed by Engr-in-charge.

Hacking out old glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and rubber/aluminium packing/beading., complete all as specified and directed by Engr-in-charge.

S&F 4 mm thick sheet glass, ordinarily quality and glazing with oil putty/screwed etc in square not exceeding 0.50 Sqm each pane., complete all as specified and directed by Engr-in-charge.

S&F 4 mm thick sheet glass, ordinarily quality and glazing with oil putty/screwed etc in square exceeding 0.50 Sqm each pane., complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier, complete all as specified and directed by Engr-in-charge..

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-charge.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, over 10 mm screed bed in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and directed by Engr-in-charge.

M&L for Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 10 mm thick scred bed in CM 1:6 set set and jointed in neat cement slurry and pointed in white or coloured cement to match., complete all as specified and directed by Engr-in-charge.

S&F for Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm, in floors etc. laid over 10 mm thick scred bed in CM 1:6 set and jointed in cement slurry and pointed with coloured cement, of coloured tiles as approved., complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic tiles in vertical surfaces 300x200x 7 mm thick as in dados, skirtings, risers to steps and the like, set and jointed in neat cement slurry laid over 10 mm thick screed in CM 1:4 jointed and pointed with white or coloured cement, complete all as specified and directed by Engr-in-charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed by Engr-in-charge.

S&F in repair Anodised aluminium door shutters, powder coating aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed by Engr-in-charge.

S&F in repair Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engr-in-charge.

M& L in repair Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, framework of windows and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engr-in-charge.

JAGDAMBA CONSTRUCTION COMPANY

Deep Construction Company

rathore construction co.

J.J.ENGINEERING