Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.8 LAccepted-AOC BEHIND HYUNDAI SHOWROOM GROUND FLOOR PLOT NO 44 BLOCK C DSIDC MANGOLPURI INDUSTRIAL AREA PHASE 1 NEW DELHI 110 083 | NEW DELHI | NORTH WEST DELHI | DELHI | 110083 | ₹14.8 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹18.8 LRejected-Finance M 92 PANCHSHEEL GARDEN NAVEEN SHAHDARA DELHI DELHI 110032 UDYAM DL 02 0011515 07BYVPP8499Q1ZN B R M MII STATUS AS VERIFIED | SHAHDARA | DELHI | 110032 | ₹18.8 L | L-2 | Rejected-Finance L-2 |
| 3 | Rejected-Technical 107 265 BRAHAMA NAGAR KANPUR UP 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | - | - | Rejected-Technical Reject |
| 4 | Rejected-Technical 5 6 NEW ST COLONY N 2 CIDCO CIDCO AURANGABAD AURANGABAD MAHARASHTRA 431005 UDYAM MH 04 0014847 | AURANGABAD | MAHARASHTRA | 431005 | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | Mirage Advertising World L1 | GARIMA SALES CORPORATION L2 |
|---|---|---|---|---|---|
| 1.01 | Ceiling Hung Directional Sign :
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge.
Sign face : Sign face - Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic.
Graphics - Plotter cut blockout vinyl (Pantone Black 6C), translucent coloured vinyl for text, colours as per graphic – (Pantone Yellow C, Pantone 311c) and pasted over milky white 040 acrylic, diffuser film on inside face of acrylic.
Sign frame - 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance.
Sign Structure - Framewrok of aluminium 25mmx 25mm hollow squrae sections.
Suspender - Stainless steel 25x25mm Hollow sections mounted on slabs/beams/walls (assuming typical length of 1 meter or more in some cases). All hardware used for fixing of sign shall be Stainless steel.
Lighting : All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to the incoming cable.
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Ceiling Hung Directional Sign.
(Refer design drawing 2.1aS, 2.1aG of Technical Specifications for more detail)
Single message - Size - 2100mm x 255mm | 8 | Job | 17,500 ₹1.4 L | 24,300 ₹1.9 L |
| 1.02 | Double message - Size - 2100mm x 515mm | 4 | Job | 24,000 ₹96,000 | 36,000 ₹1.4 L |
| 1.03 | Tripple message - Size - 2100mm X 775mm | 6 | Job | 43,750 ₹2.6 L | 45,000 ₹2.7 L |
| 2.01 | Wall Mounted Directional Sign
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign Structure - Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face.
Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance.
Graphics - Plotter cut blockout vinyl (Pantone Black 6C), translucent coloured vinyl for text, colours as per graphic – (Pantone Yellow C, Pantone 311c) and pasted over milky white 040 acrylic, diffuser film on inside face of acrylic.
Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable.
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.
(Refer design drawing 2.1c-S, 2.1c-G of Technical Specifications for more detail)
Single Message - Size 2100 mm X 255 mm | 5 | Job | 17,500 ₹87,500 | 21,600 ₹1.1 L |
| 2.02 | Double Message - Size - 2100 mm X 515 mm | 4 | Job | 24,000 ₹96,000 | 36,000 ₹1.4 L |
| 2.03 | Tripple Message - Size - 2100 mm X 775 MM | 2 | Job | 43,750 ₹87,500 | 45,000 ₹90,000 |
| 3.01 | Wall Mounted Facility Announcer
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge.
Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance.
Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable.
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Wall Mounted Facility Announcer.
(Refer design drawing 2.2a-S, 2.2a-G of Technical Specifications for more detail)
Size : 900 X 450 MM | 7 | Job | 9,000 ₹63,000 | 11,700 ₹81,900 |
| 3.02 | Size : 750 X 450 MM | 5 | Job | 9,000 ₹45,000 | 9,900 ₹49,500 |
| 4.00 | Wall Projected Facility Announcer
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge.
Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge.
Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance.
Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable.
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Wall Projected Facility Announcer.
Size : 900 X 450 MM
(Refer design drawing 2.2b-S, 2.2b-G of Technical Specifications for more detail) | 2 | Job | 9,000 ₹18,000 | 14,400 ₹28,800 |
| 5.00 | Boarding Gates - Wall Projected
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge.
Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance.
Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site.
Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Boarding Gates - Wall Projected.
Size : 1000 X 900 MM
(Refer design drawing 2.2g2-S, 2.2g2-G of Technical Specifications for more detail) | 7 | Job | 21,000 ₹1.5 L | 27,000 ₹1.9 L |
Tender Value
₹19.8 L
EMD Value
₹39,670
Closing Date
13 Feb 2025, 12:00 pmClosed
Sr. Manager (E-E)
ATS Complex AAI Aurangabad Airport
Reconfiguration of Existing Terminal building at Aurangabad Airport SH Provision of Building signages work
2025_AAI_224573_1
AAI/AU/Engg (E)/ e-NIT-05/2024-25
Open Tender
Electrical Works
120 days
Aurangabad Airport
Please refer Tender documents.
12 documents required · 12 mandatory
₹1,180
Yes
₹39,670
13 Apr 2026
23 Jan 2025
14 Feb 2025
23 Jan 2025
13 Feb 2025
23 Jan 2025
23 Jan 2025 - 29 Jan 2025
Amount
Ceiling Hung Directional Sign : Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign face : Sign face - Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. Graphics - Plotter cut blockout vinyl (Pantone Black 6C), translucent coloured vinyl for text, colours as per graphic – (Pantone Yellow C, Pantone 311c) and pasted over milky white 040 acrylic, diffuser film on inside face of acrylic. Sign frame - 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. Sign Structure - Framewrok of aluminium 25mmx 25mm hollow squrae sections. Suspender - Stainless steel 25x25mm Hollow sections mounted on slabs/beams/walls (assuming typical length of 1 meter or more in some cases). All hardware used for fixing of sign shall be Stainless steel. Lighting : All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to the incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Ceiling Hung Directional Sign. (Refer design drawing 2.1aS, 2.1aG of Technical Specifications for more detail) Single message - Size - 2100mm x 255mm
Double message - Size - 2100mm x 515mm
Tripple message - Size - 2100mm X 775mm
Wall Mounted Directional Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign Structure - Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Graphics - Plotter cut blockout vinyl (Pantone Black 6C), translucent coloured vinyl for text, colours as per graphic – (Pantone Yellow C, Pantone 311c) and pasted over milky white 040 acrylic, diffuser film on inside face of acrylic. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. (Refer design drawing 2.1c-S, 2.1c-G of Technical Specifications for more detail) Single Message - Size 2100 mm X 255 mm
Double Message - Size - 2100 mm X 515 mm
Tripple Message - Size - 2100 mm X 775 MM
Wall Mounted Facility Announcer Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Wall Mounted Facility Announcer. (Refer design drawing 2.2a-S, 2.2a-G of Technical Specifications for more detail) Size : 900 X 450 MM
Size : 750 X 450 MM
Wall Projected Facility Announcer Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Wall Projected Facility Announcer. Size : 900 X 450 MM (Refer design drawing 2.2b-S, 2.2b-G of Technical Specifications for more detail)
Boarding Gates - Wall Projected Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick White translucent 040 acrylic. as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: 50mm wide aluminium extrusion with inbuilt frame to recieve the sign face. The panel should be made easily openable for maintainance. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing for the Boarding Gates - Wall Projected. Size : 1000 X 900 MM (Refer design drawing 2.2g2-S, 2.2g2-G of Technical Specifications for more detail)
Belt No. Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Type -1 - (Hanged through pole from top slab ceiling) Sign Face – Entire Sign face all 4 sides, to be made of 8 mm thk acrylic , with the letters/pictogram to match Pantone Black 6C and the rest of the vinyl to match Yellow Pantone Yellow C. To be mounted onto framework using appropriate fixing ties/bolts.Complete box excluding bottom side is lighted with internal LED lighting. Acrylic fabrication shall have transparent structural supports for obstruction free lighting. Box to be directly mounted on the sign structure. Bottom panel – Bottom MS Panel PU Painted in colour to match Vinyl Black of 95%(Pantone Black 6C). Suspender - Stainless steel Hollow section mounted on slabs/beams/walls. Lighting: All internal illumination shall be using LED strip Lights from of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. Sign Structure:All structural members in SS square post 75 x 75 x 2.5 mm (assuming typical length of 1.7 meter), brush finished. Should be fixed through the exisitng ceiling concrte slab. All hardware used for fixing of sign shall be Stainless steel Post including SS base Plate and Gussets in 6mm thick SS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete slab.Cost to include all activities for fixing the sign in an internal location for the conveyor Belt No. sign direction.. Size : 600x600x600 mm (Refer design drawing 2.2h-S, 2.2h-G of Technical Specifications for more detail)
Lift Directory Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign Face : Sign Face: Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mm thick 040 acrylic.as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by Airport contractor at the site for the Lift Directory. Size : 800 X 460 (Refer design drawing 2.3b-S, 2.3b-G of Technical Specifications for more detail)
Utility sign - Washroom/Drinking Water/Baby Care Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign Face: Sign Face:Graphics - Plotter cut Blockout vinyl Pantone Black 6C, vinyl for text Pantone Yellow C or Cyan 311C as per graphics, pasted over 8mmthk acrylic. Lighting : All internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Secret fixing methods should be used to fix parts together. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the signae to incoming cable. Wall Mounted - Size : 450 X 450 MM (Refer design drawing 2.4a-S, 2.4a-G, Type 2 of Technical Specifications for more detail)
Lift No. Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign Face: Sign face shall be made in 8mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 25 mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with VHB tape in one side and Hook & Loop tape from the other side so as the panel be easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the sigange to incoming cable. Wall Mounted - Size 400 X 400 mm (Refer design drawing 2.4c-S, 2.4c-G of Technical Specifications for more detail)
Emergency Signs - Photoluminiscent Providing and fixing all Photoluminescent signs in the dedicated fire escape passages of the airports as per locations given in sign schedules, made of inkjet printing using artworks provided and with photoluminescent material as per technical specifications. Inkjet printing shall be done on self-adhesive vinyl and pasted on 2mm thick powder coated white (RAL 9016) aluminium plate and fixed at location using screws. as per specification and using provided artwork including all operations from procuring the correct materials and made to sizes as specified and approved by the Engineer-in- charge. including all installation activities like marking, alignment and fixing with screws into the wall/cladding/ face to the satisfaction of the Engineer-in- Charge Signage Sheet for the Emergency Signs - Photoluminescent. Size - (Different Size as per the requiremet) (Refer design drawing 2.6b-G of Technical Specifications for more detail)
Emergency Direction Signs Illuminated Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. 1. Sign Frame - 1.5mm CRCA MS powdercoated white. 2. Sign Face - Laminated acrylic 6mm thick with graphics in white and green transluscent vinyl on the inside face of the glass. 3. Illumination : All Internal illumination using LED lamps connected to a UPS with a min 1.5hr backup. Cost to include all internal connections and Wiring, terminating and connecting the signage to incoming cable. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. 4. Sign Fixing - Suspenders and projecting pipes shall be stainless steel to match other similar hardware 35mm dia or Wall mounted as per the instructions of EIC. Dimensions : (675 x 255)mm or (900x225)mm as per site requirement (Refer design drawing 2.6a-G (2.6a-1 and 2.6a-2) of Technical Specifications for more detail) (Requirement of Design 2.6a -1 and 2.6a - 2 will be decided by the EIC)
GARIMA SALES CORPORATION (BID ID -817622)
stage.html
html • 0.04 MB
techsummary_251157.pdf
BOQ Comparative Chart
xlsx
finsummary_251157.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tenderdoc.pdf
Tender Documents • 28.18 MB
BOQ_251157.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid