Beautification and development of Park near Bus Stand Hamirpur

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads Nominal concrete 1:3:6 (One cement : three sand : six graded stone aggregate) or richer mix (including equivalent design mix) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm (thirty centimetre) in depth, 1.5 m ( one point five metre) in width as well as 10 sqm (ten square metre) on plan) including getting out and disposal of excavated earth upto all leads and lifts for all kinds of soil including chiseling of hard rocks where blasting is prohibited including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms within all leads including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts oridinary rock and all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete M-10 grade (M-Ten ) grade with 20 mm (Twenty millimetres) nominal size of specified grade in toe wall, parapet, catch pit and side drain excluding the cost of centering and shuttering as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etc.

Foundations, footings, bases for columns

Suspended floors, roofs, landings, balconies and access plat form

Columns, piers, abutments, pillars, posts and struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slab and break in floors and walls under 20cm wide

Providing and laying design mix reinforcement cement concrete M-25 ( M- Twenty five) with minimium crushing strength of 25N/mm2( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic metres, mechanically mixed and vibrated and curing complete in Foundation, footings, bases of columns and the like and mass concrete excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floorlevels, excluding the cost of centering, shuttering, finishing and reinforcement with design mix cement concrete M-25 ( M- Twenty five) with minimium crushing strength of 25N/mm2 ( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic meter, mechanically mixed and vibrated and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in position specified grade of Reinforced cement concrete work design mix cement concrete M-25 ( M- Twenty five) with minimium crushing strength of 25N/mm2( Twenty five Newton per millimetre square) using graded stone aggregate 20mm ( twenty millimetre) nominal size with minimum cement content not less than 400.00 kg( four hundred kilogramme) per cubic meter, mechanically mixed and vibrated and curing complete in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor levels, excluding cost of centering, shuttering, finishing and reinforcement upto all floor levels including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Steel reinforcement (TATA/JINDAL/PANTHER/SAIL make) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels of TMT Bars Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Yash Paul