55/MID/AN

Design, manufacture, supply installation, testing & Commissioning of gantry with 3 Ton Chain pulley Block with accessories for extraction of Foot valves at LIS Bhanara. The job involves laying RCC Concrete blocks 2 Nos. of Size (1m x 1m) adjacent to the suction pipes for anchoring of vertical square sections. Laying of one layer of 1:4:8 concrete mass, 4 ft depth, providing and laying of M.S angle 50x50x6mm. Providing and fitting of suitable no of vertical TMT steel members should be provided all along the blocks and cement concrete properly grouted in the blocks with complete curing. Fabrication of 2 Nos. 15 ft height vertical square section of size (0.25m x 0.25m) out of M.S angles of 50x50x6mm size at the base for erection of the square sections at site of LIS .Erection of the 2 nos. Square sections by anchoring them in the RCC. The job involves providing and fitting of ISMB 200 of length 10 ft and welding it on the top of two square sections by lifting and placing it on sections. Job also involves providing and fitting of 3Ton chain pulley block along with horizontal movement mechanism on the overhead gantry, testing and commissioning. The job include the cost of material, labour charges for fabrication of overhead gantry and welding set & Oxy-acetylene gas equipments, transportation charges, skilled/semiskilled labour charges at the site of installation. Complete Job

Fabrication and installation of M.S. Staircase 17 feet long 2.5 feet wide with working platform [2.5 feet long, 2.5 feet wide] from 40mm dia. M.S Pipe for railing and 40×6mm M.S flat for working platform and MS angle iron 40x40x6mm & M.S channel 75x40mm at site. The staircase has steps of size 2.5feet long with rise 10 inch and tread 10 inch. The staircase should be properly fixed by way of welding of suitable nos. of M.S legs grouted in cement concrete along the side of bank of river and required nos. M.S angle iron posts for proper clamping of railing on both sides with suitable nos. of M.S. angle iron and M.S. iron flat supports for M.S. stair case for its proper fixing. The job include cost of material, labour charges and painting charges by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. Job also included all types of carriage charges of material and tools tackles to site and outstation charges etc. Complete job

Electrification of pump room building at L.I.S by way of using standard quality material as per site requirement for lighting circuits, heating circuits and by providing and fitting of light points with LED bulbs., conduit pipes , P.V.C. Copper Cable of suitable sizes, Plastic P.V.C. pipes, wooden boxes/Iron boxes, Bakelite sheets, Switches, Junction boxes, Hooks, Bends, Steel wire, Service lines etc The job includes repair of main shutter at the entrance of the pump house. The job also includes Job includes the carriage charges of all the material, hire charges of tools & tackles, skilled & unskilled labour charges, cost of material for complete electrification of pump house at L.I.S. Complete Job

Restoration of 200 mm dia foot valve of pumping unit no. 02 at LIS Bhanara . The job involves decoupling the foot valve by cutting/unfastening the nuts and bolts from suction pipe. Extraction of foot valve out of river with help of chain pulley block and manual labour. Thereafter providing/installation of new foot valve of the same size. Lowering the foot valve in the river & coupling with suction pipe by providing new rubber packing sheet, nuts bolts and washers. Checking for leakages. Priming the pump & testing/commissioning on full load. The job includes cost of material, labour, transportation etc as per site conditions of LIS. Complete Job

Restoration/reconditioning of 200mm dia suction pipes at LIS Bhanara . The job involves disconnecting the suction pipes from the pump , extraction of foot valves and pipe pieces from the sump side with help of manual labour and allied tools and tackles. Strengthening of the suction pipes by welding at the leaking portions of the pipes and flanges as per the size. Connecting the suction pipes by providing/fitting of rubber packing at each flange along with nuts , bolts and washers .. Rejoining of foot valve with the suction pipe , lowering in sump and connecting suction pipes to the respective pump . Complete job includes the cost of material and labour charges for dismantling , extraction , lowering and fitting in the sump including head load at the site of LIS including hire charges of tools and tackles , transportation charges etc. Complete job.

Restoration of Sluice valve ( 150 mm) of pumping unit no.1 installed at LIS Bhanara . The job involves dismantling of the sluice valve by way of unfastening/cutting of the rusted nuts and bolts with the help of allied tools and tackles. Thereafter providing/installation of Sluice valve of the same size. Fitment of Sluice valve and fitting of new nuts, bolts and washer . Complete job includes the cost of material, labour charges, transportation charges etc. Complete Job

BEE AAR ENTERPRISES

TRIKUTA ELECTRICAL AND MECHANICAL WORKS