Loading
Loading…
Loading…
Tender Value
₹5.6 Cr
EMD Value
₹11.3 L
Closing Date
10 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
OS/EL/C/JP
14 conditions · 3 needing a document upload
"Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or ""V"" whichever is less crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. "
Only such tenderer(s) who satisfy the following eligibility criteria shall be considered:- The Contractor should have valid Electrical Contractor License issue by Govt. and submit along with tender document if valid Electrical Contractor License is not submitted along with tender documents then offer will be summarily rejected.
"(a)The tenderer must have successfully completed/substentially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, ora One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annex. IV-A or IV-B or IV-C. Note :- Criteria for the completed work/Substantially completed has been given in the General instructions in the tender document. "Following works will be treated as similar nature of work:"Any Electrical work related to HT/LT installations."
61 conditions · 5 needing a document upload
"Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period. "
In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have read the various conditions to tender attached here to and agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for a period as mentioned in NIT header from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our "Bid security". I/We offer to do the work for North Western Railway, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within time period as mentioned in the NIT Header from the date of issue of letter of acceptance of the tender.
I/We also hereby agree to abide by the General Conditions of Contract-2022 corrected up- to- date and to carry out the work according to the Special Conditions of Contract and Indian Railways Unified Standard Specifications (Materials and Works) 2 0 2 1 as corrected up-to-date, Unified Standard Schedule of Rates of North-Western Railway - 2021 as corrected up-to-date & C P W D DSR-2023 and Specification 2019 (for the present contract)
Electrical work of redevelopment of Alwar Railway Station of North Western Railway.
EL-C-JP-AWR-T01-26-27
EL-C-JP-AWR-T01-26-27
Open
Works - General
24 Months
Jaipur, Rajasthan
₹0
₹11.3 L
10 Jun 2026
14 May 2026
27 May 2026
293 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 5,62,92,565 | ||
| — | 400.00 | — | — | ||
| Recessed/Surface conduit wiring system-Supply of material and wiring of LP/TP/FP/Exhaust fan/ Bell point with single core multistrend copper conductor size 1.5 Sq.mm in PVC conduit pipe with 5/6 Amp piano/modular type switch/ceiling rose/batten holder etc. As per specification. | — | — | — | 1,50,000 | |
| — | 100.00 | — | — | ||
| Supply and fixing 5/6A plug, modular 5-pin 230V including modular swithch and with modular board and wiring with 2.5 sqmm PVC CU cable as per spec. | — | — | — | 23,100 | |
| — | 100.00 | — | — | ||
| Supply and fixing 15/16A plug, modular 5-pin 230V including modular switch and with modular board and wiring with 04.0 sqmm PVC CU cable as per spec. | — | — | — | 27,200 | |
| — | 50.00 | — | — | ||
| Supply and fixing 2 module modular switch board plate for fixing of modular switches -plug with sheet metal box of good quality concealed fixing of MS /PVC as per site engineer | — | — | — | 5,750 | |
| — | 100.00 | — | — | ||
| Supply and fixing 6 module modular switch board plate for fixing of modular switches -plug with sheet metal box of good quality concealed fixing of MS /PVC as per site engineer | — | — | — | 20,600 | |
| — | 60.00 | — | — | ||
| Supply and fixing 8 module modular switch board plate for fixing of modular switches -plug with sheet metal box of good quality concealed fixing of MS /PVC as per site engineer | — | — | — | 16,140 | |
| — | 40.00 | — | — | ||
| Supply and fixing 12 module modular switch board plate for fixing of modular switches -plug with sheet metal box of good quality concealed fixing of MS /PVC as per site engineer | — | — | — | 13,040 | |
| — | 50.00 | — | — | ||
| Supply and fixing ceiling of fan regulator electronic type 5-step as per spec | — | — | — | 17,050 | |
| — | 2000.00 | — | — | ||
| Supply, laying, connection and commission of sub-main 2x2.5 Sqmm with PVC insulated single core copper conductor cable and same size PVC insulated copper conductor for earthing wire in 19/20 mm ISI PVC conduit in recessed/ on surface as per site requirement etc. of various size cable as below. As per specification. | — | — | — | 1,28,000 | |
| — | 1500.00 | — | — | ||
| Supply, laying, connection and commission of sub-main 2x4 Sqmm with PVC insulated single core copper conductor cable and same size PVC insulated copper conductor for earthing wire in 19/20 mm ISI PVC conduit in recessed/ on surface as per site requirement etc. of various size cable as below. As per specification. | — | — | — | 1,66,500 | |
| — | 500.00 | — | — | ||
| Supply, laying, connection and commission of sub-main 2x6 Sqmm with PVC insulated single core copper conductor cable and same size PVC insulated copper conductor for earthing wire in 19/20 mm ISI PVC conduit in recessed/ on surface as per site requirement etc. of various size cable as below. As per specification. | — | — | — | 60,000 | |
| — | 200.00 | — | — | ||
| Supply, laying, connection and commission of sub-main 2x10 Sqmm with PVC insulated single core copper conductor cable and same size PVC insulated copper conductor for earthing wire in 19/20 mm ISI PVC conduit in recessed/ on surface as per site requirement etc. of various size cable as below. As per specification. | — | — | — | 52,000 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of RCBO 63A, Four pole, 30mA with Earth leakage, overload and short circuit protection as per specification. | — | — | — | 38,940 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of Distribution Board double door, 3-phase and neutral with incoming 63A 4-pole MCB and outgoing 12Nos. MCB 6-32A single pole as per specification. | — | — | — | 59,580 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of RCBO 25A, Four pole, 30mA with Earth leakage, overload and short circuit protection as per specification. | — | — | — | 27,310 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and connecting of Distribution Board with incoming 32A, single phase, DP MCB and outgoing | — | — | — | 31,140 | |
| — | 460.00 | — | — | ||
| Supply and fixing metal clad plug socket 20A single phase with 32A MCB including fixing and sheet metal enclosure box with one 20A plug top (Ray roll type) to be supplied with board. | — | — | — | 4,16,300 | |
| — | 400.00 | — | — | ||
| Installation /shifting testing and connection of ceiling fans (Fans will be supplied by Railway). As per specification. | — | — | — | 51,600 | |
| — | 60.00 | — | — | ||
| Supply, fixing and commissioning of street light fitting accessories i.e. GI pipe of suitable boar/size as per fitting, clamps, nuts, bolts, cable/wire etc. As per specification. | — | — | — | 9,780 | |
| — | 150.00 | — | — | ||
| Fixing, testing & commissioning of LED street light complete (Fitting supplied by Rly. & transported by Contractor). As per Specification. | — | — | — | 15,600 | |
| — | 1600.00 | — | — | ||
| Fixing, testing & commissioning of LED tube light fitting as per spec. (Complete fitting will be supplied by Rly. & | — | — | — | 1,26,400 | |
| — | 14.00 | — | — | ||
| Transportation, commissioning and Installation of water cooler 150 ltrs. Water cooler will be supplied by Rly. | — | — | — | 1,05,098 | |
| — | 96.00 | — | — | ||
| Supply and fixing of G.I.pipe 50mm for cable laying with pole/wall/under road/floor etc. | — | — | — | 24,096 | |
| — | 10000.00 | — | — | ||
| Supply and laying of HDPE pipe conforming to IS 4984:1995, 50 mm dia wall thickness 3 mm under the road/PF/ in ground or as per site requirement. As per specification. | — | — | — | 11,60,000 | |
| — | 4000.00 | — | — | ||
| Supply and laying of HDPE pipe conforming to IS 4984:1995, 75/80mm dia wall thickness 3 mm PN-4 under the road/air. The work involves laying of HDPE pipe. As per specification | — | — | — | 4,76,000 | |
| — | 4000.00 | — | — | ||
| Supply and laying of HDPE pipe, dia 160mm under road/ground/ floor/railway track or as per site requirement already excavated trench. As per specification | — | — | — | 18,48,000 | |
| — | 10000.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec. ( trench work may be on kuchha/pucca land and all type of | — | — | — | 4,80,000 | |
| — | 4000.00 | — | — | ||
| Excavation & refilling of 0.5 m width, 1.2 m Deep tranch in all kind of soil for laying of HDPE/ SPUN Pipe for under ground cable crossing. As per specification. | — | — | — | 5,08,000 | |
| — | 20000.00 | — | — | ||
| Laying, testing & commissioning of LT cable in Air / laid concrete pipe /in ground in trench across crossing pole with transportation from main depot to required site . Note:- Cable will be supplied by Railways. | — | — | — | 4,20,000 | |
| — | 2000.00 | — | — | ||
| Laying, testing & commissioning of 11 KV /33 KV XLPE cable in air/ ground/ in trench/spun pipe,with transportation from main depot to required site. Note:- Cable will be supplied by Railways. | — | — | — | 1,60,000 | |
| — | 2500.00 | — | — | ||
| Drilling of horizontal bore below Rly track by pushing method for laying of HDPE/SPUN/DWC pipe of various sizes up to 450 mm dia. As per specification | — | — | — | 75,15,000 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing & commissioning of VTPN type metal double door type 8 way DB with having 01 No. 250 Amp., 4 pole MCCB, 36 KA as incomer & 8 Nos. TP MCB, 10 KA 'C' curves, 40-63 Amp. Cap. as outgoing having suitable IP-54, IK-09 protection | — | — | — | 4,13,728 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of VTPN DB 4 way having incoming 01 No. 125 Amp 4 Pole MCCB 36KA and outgoing 04 Nos. TP MCB 40/63 Amp 'C' Curve 10KA as required make from reference list. As per specification. | — | — | — | 1,71,984 | |
| — | 8.00 | — | — | ||
| Supply, installation, testing & commissioning of 04 pole MCCB, 250 AMP, 36 KA with double door encloser for outdoor purpose as par specification | — | — | — | 1,14,816 | |
| — | 6.00 | — | — | ||
| Supply, installation, testing & commissioning of 04 pole MCCB, 125 AMP, 36 KA with double door encloser for outdoor purpose as per specification | — | — | — | 53,058 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of fabricated Feeder Pillar distribution box made of MS sheet 1.6mm thick size 600x300x600mm with suitable MS stand Copper bus bar of 200A capacity and 2x63A MCB 4 pole as per specification. | — | — | — | 60,192 | |
| — | 2.00 | — | — | ||
| Supply, erection (with foundation/support structure), testing & commissioning of weather proof feeder pillar in position on suitable platform of brick masonry in 1:6 with neat finish cement plaster having suitable size of channels for mounting feeder pillar, the feeder pillar is to be fabricated out of 14 SWG CRCA sheet with powder coated painting and IP-55 class of insulation having hingeddoor and locking arrangement neoprene gasket, extensible from both sides, suitable for 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, of approved shape along with electrolytic copper Bus Bars of suitable rating, nuts- bolts and washer dust vermin water proof including painting with primer, and two coats of approved shade including proper connection with suitable size of wire with all connecting materials, earthing making etc. complete as required with following mountings . (i) 250 A, 36 KA 4P MCCB 1 No., (ii) 100 A, 36 KA 4P MCCB 2 No. (iii) 63 A, 36 KA 4P MCCB 4 No., (iv) 32 A DP MCB 2 No., (v) 32 A SPN MCB 5 No, (vi) 10/6 A SPN MCB 9 No., (vii) Micro Rex QT 31 Time switch 9 No. , with required size electrolytic copper Bus Bar, contactor ,insulator, indicating lamp and other measuring instrument including all connecting material etc as required. | — | — | — | 3,81,516 | |
| — | 1.00 | — | — | ||
| Supply, erection (with foundation/support structure), testing & commissioning of weather proof feeder pillar in position on suitable platform of brick masonry in 1:6 with neat finish cement plaster having suitable size of channels for mounting feeder pillar, the feeder pillar is to be fabricated out of 14 SWG CRCA sheet with powder coated painting and IP-55 class of insulation having hinged door and locking arrangement neoprene gasket, extensible from both sides, suitable for 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, of approved shape along with electrolytic copper Bus Bars of suitable rating, nuts- bolts and washer dust vermin water proof including painting with primer, and two coats of approved shade including proper connection with suitable size of wire with all connecting materials, earthing making etc. complete as required with following outings.(iii)Incoming 1 no. 63 Amp 4 P MCCB & outgoing 32 A 4P MCB 2 Nos. MCB DP 16 Amp. 6 Nos. with required size copper bus bar, contactor, insulator, indicating lamp and other measuring instrument including all connecting material etc as required | — | — | — | 27,917 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing, testing and commissioning of feeder pillar panel having MCCB as Incoming & MCCB as Outgoing conforming to IEC 60947-2 / IS 13947: 2008 or latest with digital measuring instrument, indicating lamp & copper bus-bar arrangement conforming to IS 8623:2008 or latest and as per IS, IE rules and site requirement comprising with the following 1x250 A 4P MCCB 36KA with adjustable Microprocessor trip release (Incoming), 6x125A, 1x63AMCCB 4P 36KA with adjustable Microprocessor trip release (Outgoing) complete. | — | — | — | 4,82,022 | |
| — | 60.00 | — | — | ||
| Supply, fabrication, erection, testing and commissioning of G.I. octagonal pole 5 meters long double arm suitable for street light fixture including digging of pit, making foundation and muffing with cement, concrete concrete 1 : 3 : 6. As per Specification | — | — | — | 6,66,480 | |
| — | 30.00 | — | — | ||
| Supply, fabrication, erection, testing and commissioning of G.I. octagonal pole 7 meters long single arm suitable for street light fixture including digging of pit, making foundation and muffing with cement, concrete concrete 1 : 3 | — | — | — | 2,96,070 | |
| — | 40.00 | — | — | ||
| Supply and providing of cable marker - for underground cable (Other than PLTC) The cable marker shall be made of MS shet 1.5 mm thick size 150 x 200 mm welded with 12 mm dia MS rod 01.50 Mtrs long . The lower end of rod should be turned in hooks shape and atteched with the cable at the laying | — | — | — | 6,840 | |
| — | 50.00 | — | — | ||
| Supply and Providing GI Pipe Earthing of 3 meter length. As per specification. | — | — | — | 61,300 | |
| — | 40.00 | — | — | ||
| Supply & providing copper plate earthing 4 metre deep, copper plate size 600x600x3 mm as per spec. | — | — | — | 2,91,600 | |
| — | 400.00 | — | — | ||
| Supply and fixing of Copper Earth Flat strip size 25x3mm as per spec. | — | — | — | 1,42,800 | |
| — | 160.00 | — | — | ||
| Supply, fixing, testing and commissioning of storage geyser 15 litter capacity from approved makes. The geyser shall be rated 3 star or above as per specification. | — | — | — | 5,26,240 | |
| — | 400.00 | — | — | ||
| Supply fixing and commissioning of Single Sided LED Sign board with symbol. As per specification | — | — | — | 9,91,200 | |
| — | 200.00 | — | — | ||
| Supply fixing and commissioning of double Sided LED Sign board with symbol. As per specification | — | — | — | 5,67,800 | |
| — | 80.00 | — | — | ||
| Supply, installation, testing and commissioning of call bell 220/230V as per specification. | — | — | — | 18,720 | |
| — | 6.00 | — | — | ||
| Supply, fixing, testing and commissioning of single stage Mono-block open well submersible pump set with control panel rating 2HP/1.5KW, Head range (M) :26 meters and above, size (MM) suction X delivery 50X40, Discharge (LPM):180 or above at 26 meter head suitable for single phase 50Hz AC supply make CRI, CG, Kirloskar as per spec. | — | — | — | 98,538 | |
| — | 6.00 | — | — | ||
| Supply 0f mono-block sub. Pump 7.5HP 415 Volt complete with accessories as per site requirement sight including unlowering of existing pump, and as per specification enclosed. | — | — | — | 1,09,092 | |
| — | 6.00 | — | — | ||
| Lowering, testing & commissioning of horizontal monoblock submersible pump set including unlowering of existing pump, as per specification | — | — | — | 10,668 | |
| — | 2.00 | — | — | ||
| Supply of submersible energy efficient Pumps (3 star or above) 10HP,20 STAGES, 3- PHASE, 415V AC complete with accessories at sight as per specification. | — | — | — | 1,45,226 | |
| — | 2.00 | — | — | ||
| Installation /lowering of submersible Pump set with G.I. pipe, nut, bolt, washer & rubber packing and copper cable As per specification. | — | — | — | 10,334 | |
| — | 600.00 | — | — | ||
| Supply of copper flat cable size 3x6 sq mm as per specification | — | — | — | 66,600 | |
| — | 2.00 | — | — | ||
| Supply and fixing pipe fittings bends, sockets, flanges, delivery valve and non-return valve and supporting clamps (2 set) As per specification | — | — | — | 11,340 | |
| — | 8.00 | — | — | ||
| Supply and installation of automatic control panel with star delta starter for 10 HP three-phase pump ( Monopole / Submersible) including connections and providing cable from main board to control panel and connection for WLG in open bore well as per detailed specifications . | — | — | — | 1,66,152 | |
| — | 300.00 | — | — | ||
| Supply of G.I. pipe 50 mm dia 'B' class for delivery | — | — | — | 1,04,700 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 16 M high mast shaft totally hot dip galvanized and suitable for wind velocity as per IS 875 part-3. The mast shaft shall be in two finished section it shall also include all accessories for 16M high mast | — | — | — | 4,72,284 | |
| — | 2.00 | — | — | ||
| Design and casting of suitable foundation with M-20 concrete for the 16mtr high mast having the safe soil bearing capacity at site as 10T/sqmtr at 2 meter depth including supply of foundation bolts manufactured from special steel along with nuts, washers and anchor plates and templates and as per specification enclosed. | — | — | — | 46,240 | |
| — | 16.00 | — | — | ||
| Supply and fixing of 160W or above LED Floodlight comprising Die cast aluminium housing with toughened glass complete with Electronic driver, Luminaries has the System lumen efficacy of 100 lumen/Watt as per specification. | — | — | — | 3,47,792 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 240W or above LED Floodlight comprising Die cast aluminium housing with toughened glass complete with Electronic driver, Luminaries has the System lumen efficacy of 100 lumen/Watt as per specification. | — | — | — | 2,38,652 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing, commissioning of LED Aviation light luminaries Model no. BGAV 302 LED of Bajaj or similar. | — | — | — | 16,052 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of control panel housing suitable timer control circuit for automatic ON & OFF of the 25/16 mtr. Mast lights at a pre-set time and as per specification enclosed. | — | — | — | 23,802 | |
| — | 10.00 | — | — | ||
| Supply / preparing of drawing in Auto CAD (Original + 2 copies) Jat Mat paper of 85/90 GSM showing over all electrical installation of Railway station. As per specification. | — | — | — | 35,890 | |
| — | 20.00 | — | — | ||
| Supply installation Testing & Commissioning of rechargeable batten type Emergency light, 60 LEDs 4 watt or higher with one hour minimum backup make as per reference list. | — | — | — | 57,260 | |
| — | 80.00 | — | — | ||
| Supply, installation, testing and commissioning of Baton integrated LED channel luminaries 05W complete. As per specification. | — | — | — | 1,17,920 | |
| — | 400.00 | — | — | ||
| SITC of pre painted / G.I Cable Tray for Copper Piping complete with supports as per specification. | — | — | — | 2,67,200 | |
| — | 4.00 | — | — | ||
| Supply, fixing testing and commissioning of Astronomical timer multifunctional digital as per specification | — | — | — | 39,176 | |
| — | 20.00 | — | — | ||
| SITC of LT heat shrinkable straight through joint (25-185sqmm cable) | — | — | — | 45,900 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of LT Panel. It consists of two nos. separate Incoming of 4 Pole 250 A MCCB 36KA, bus bar and outgoing MCCBs as per specification | — | — | — | 1,70,375 | |
| — | 1.00 | — | — | ||
| supply, erection (with foundation/support structure), testing and commissioning of weather proof LT panel complete with 630Amps 4P MCCB, 36 KA-1 No., 400 Amps 4P MCCB 36KA-4 No., 250Amps 4P MCCB 36KA-6 No, 100Amps, 4P MCCB 36KA-4 No., The digital type MFM meter with CT's of suitable capacity with R.S.485 port for incoming supply and digital type MFM meter with CTs of suitable capacity & R.S.485 port for each out going feeders including with all other connected accessories etc. to be provided. Copper busbar of suitable current rating, The panel should made from 2mm CRCA sheet powder coated painting and IP-55 class of insulation having hinged door and locking arrangement neoprene gasket, extensible from both sides, suitable for 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, floor mounted with insulator, indicating lamp, measuring instrument, including all connecting material etc as required. (Breaker shall comply Microprocessor trip release, MFM used shall show V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events (High-Low), Neutral Current, k factor and Maximum Demand (kW & kVA)). | — | — | — | 6,88,221 | |
| — | 1.00 | — | — | ||
| Supply, erection (with foundation/support structure), testing and commissioning of weather proof LT panel complete with 1x400 A 4P MCCB 36KA with adjustable Microprocessor trip release (Incoming), 4x125A,4x250A MCCB 4P 36KA with adjustable Microprocessor trip release (Outgoing) completed , with the digital type MFM meter with CT's of suitable capacity with R.S.485 port for incoming supply and digital type MFM meter with CTs of suitable capacity & R.S.485 port for each out going feeders including with all other connected accessories etc. to be provided.. The panel should made from 2mm/14SWG CRCA sheet powder coated indoor floor mounted with suitable size of electrolytic copper Bus Bar, insulator, indicating lamp, measuring instrument, including all connecting material etc as required. | — | — | — | 4,49,210 | |
| — | 30.00 | — | — | ||
| Dismantling of existing LT Poles with fittings by digging the foundation and transportation up to the required site as per specification. | — | — | — | 15,240 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing & commissioning of outdoor type cable end boxes suitable for 11 KV 'E' 3 core 185 Sq.mm XLPE | — | — | — | 1,83,560 | |
| — | 4.00 | — | — | ||
| SITC of straight through joint 11 KV three core HT XLPE 185 SQMM | — | — | — | 45,120 | |
| — | 1.00 | — | — | ||
| Dismantling/shifting the existing lattice LED Light tower/High Mast. | — | — | — | 27,565 | |
| — | 150.00 | — | — | ||
| SITC of surface mounting LED 1X1 luminaire Bajaj model no. BCTBLS 18ZT WH or similar as per reference list. | — | — | — | 9,00,300 | |
| — | 150.00 | — | — | ||
| SITC of Recess mounting LED 1' x 1' luminaires model no. BZRSQL 18 W LED complete as per Bajaj Cat. or similar make as per reference list | — | — | — | 5,65,200 | |
| — | 100.00 | — | — | ||
| Supply and fixing of Recess mounted 36W (2feetx2feet) LED Luminaire comprising CRCA sheet steel housing with white powder coating complete with Electronic Driver and with small optical window added with high Translucent frosted diffuser. Having System wattage of 36W and System lumen efficacy of 100 Lumen/Watt complete with Electronic Driver. Operating voltage range 140 to 270 volt, THD<10%, Power factor>0.95, surge protection 2.5 KV and CRI>80. Cat No. LCTLRN-36-CDL or similar as per specification. | — | — | — | 6,40,000 | |
| — | 140.00 | — | — | ||
| Supply and fixing of recess mounting LED down lighters 9W white lamp type pressure die-cast alumimium housing with white front frame with opal translucent cover. High power LEDs mounted as per specification. | — | — | — | 8,32,300 | |
| — | 2.00 | — | — | ||
| Supply & Fixing ISI marked (IS : 15683 ) Portable Fire Exitnguisher, CO2 type flate base including valve, discharge hose of not less than 10mm dia, min.600mm long & complete in all respects including initial fill with CO2 gas confirming to IS:307 of 1966 filled to a filling ratio of not more than 0.667 and wall suspention bracket capacity of 4.5 kg capacity. | — | — | — | 14,868 | |
| — | 4.00 | — | — | ||
| Supplying and Fixing of fire bucket stand made out of MS angle with one coat of primer and two coat of enamel paint of approved shade including platform and associated civil works each stand should have four nos fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters "Fire" in black and gold at approved location as per direction of Engineer incharge. | — | — | — | 16,028 | |
| — | 30.00 | — | — | ||
| SITC of variable refrigerant flow/VRV modular type air-conditioning system VRF/VRV inverter controlled with stepless wide range of capacity control complete with indoor & outdoor units, as per detail given in specifications and having following items: Refrigerant to be used shall be R-410 a. modular type top discharge outdoor unit equipped with highly efficient multi scroll/twin rotary compressors with fully inverter, with multi inverter type compressor & suitable for 320 V-460V 50Hz. condensing unit to constitute required HP system (outdoor unit configuration/capacity will be taken as per railway requirement) circuit to reduce the redundancy of compressor, special heat exchanger, low noise condenser fan with DC variable speed motor, auto address setting , auto check function for connection error, with sandwich type vibration isolator rubber pads, auto address setting and capacity as mentioned below, outdoor unit (nominal capacity delivered at 430 C ) as per specification (cooling & heating operations) | — | — | — | 7,56,000 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of indoor unit of various type and capacity as mentioned below. The unit shall be equipped with suitable electronic expansion valve, which can communicate with the controller in the condensing unit, multispeed motor, self-diagnostic type cordless remote controller, coil section with DX coil, outer cabinet, drain pan, built in drain pump, drain water lift-up mechanism insulation, pipe connections, imported Y-joints & header, Tee, fresh air intake connector for cassettes etc. of various capacities as per specification. a. 1.5 TR cassette type indoor unit | — | — | — | 66,564 | |
| — | 2.00 | — | — | ||
| 2.3 TR cassette type indoor unit | — | — | — | 71,442 | |
| — | 2.00 | — | — | ||
| 3.2 TR cassette type indoor unit | — | — | — | 76,030 | |
| — | 2.00 | — | — | ||
| 4.0 TR cassette type indoor unit | — | — | — | 77,966 | |
| — | 6.00 | — | — | ||
| Supply of Air-cooled VRF Hi-wall type indoor unit 1.5/2.0 TR | — | — | — | 1,84,980 | |
| — | 6.00 | — | — | ||
| Fixing and commissioning of high wall/Split AC 1.5/2.0 Ton inclusive first charging of refrigerant if required. | — | — | — | 7,254 | |
| — | 10.00 | — | — | ||
| SITC of cordless remote controller as per specification. | — | — | — | 10,110 | |
| — | 12.00 | — | — | ||
| SITC of copper distribution joint kit as per specification. | — | — | — | 67,476 | |
| — | 400.00 | — | — | ||
| S.I.T.C of control cabling: Supply & installation of control and transmission wiring between indoor and outdoor unit as per specification. | — | — | — | 64,000 | |
| — | 400.00 | — | — | ||
| S.I.T.C of Refrigerant piping: supply & installation of copper refrigerant piping of required sizes with nitrile insulation as per specification | — | — | — | 5,54,400 | |
| — | 100.00 | — | — | ||
| Drain Piping: Supply, installation, testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6mm thick close cell nitrile rubber insulation as per specification a.32 mm dia | — | — | — | 23,100 | |
| — | 100.00 | — | — | ||
| 25 mm dia | — | — | — | 20,200 | |
| — | 2.00 | — | — | ||
| Supply & gas charging of refrigerant R-410a as per OEM design parameters (each cylinder gas 45 Kg) & testing as per specification. | — | — | — | 70,206 | |
| — | 8.00 | — | — | ||
| SITC of M.S. stand as per specification. | — | — | — | 34,344 | |
| — | 10.00 | — | — | ||
| Rubber mat (ISI marked) non-stick type suitable for 11 kv AC supply of size 2000x1000x25mm as per specification | — | — | — | 9,530 | |
| — | 1.00 | — | — | ||
| SITC of 11 KV, 630 A, 20kA / 3 sec, Out door, Extensible type Ring main unit (RMU) in suitable RCC foundation with 2 no. Load break switch & 1 no. VCB / SF6 circuit breaker as per specification | — | — | — | 3,54,162 | |
| — | 1.00 | — | — | ||
| Supply and testing of set of standard equipments/ instruments required for maintenance of CSS. (As per specification) | — | — | — | 93,709 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of firefighting equipment's. (As per Specification) | — | — | — | 19,105 | |
| — | 4.00 | — | — | ||
| Supply, fixing testing and commissioning 20 kVA UPS as per spec. | — | — | — | 16,82,424 | |
| — | 400.00 | — | — | ||
| Provision of MS Jali 1"x1" welded on MS angles as per specification. | — | — | — | 28,000 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of wall bracket/ mounted type industrial air circulator 600 mm sweep single phase 230V, 50Hz complete with all accessories along with wiring. (Equivalent to Almonard cat. Ref. No. 565304 or any from approved makes) (As per specification) | — | — | — | 3,52,900 | |
| — | 1600.00 | — | — | ||
| Supply of material and wiring of shed TP/FP with 1.5 sqmm single core multi-stranded copper wire PVC insulated in conduit 1.5mm thick 19mm size white colour shall be fixed with junction box TEE and 1.5mmsq PVC CU cable insulated multi stranded for earth wire and 5/6A, ceiling rose. The conduit shall be fixed with rawl plugs/ tied with 14 S.W.G. copper wire including connection as per spec. | — | — | — | 2,83,200 | |
| — | 2400.00 | — | — | ||
| Supply and provide MS flat of iron size 40x3mm with specers and fixing clamps as per specification | — | — | — | 3,91,200 | |
| — | 2400.00 | — | — | ||
| Supply and fixing casing caping of PVC size 75x75mm and 2mm thick with suitable nut bolts for fixing or tied with copper wire 14swg for 5/7 nos. of copper wire & earth wire as per spec | — | — | — | 3,79,200 | |
| — | 2500.00 | — | — | ||
| Supply, laying and fixing five wire of PVC copper cable size 10sqmm flame retardant, low smoke single core insulated un sheathed multi-stranded copper conductor, voltage grade 1.1 KV (1100 v) conf to IS694-1990 or latest in five with one no 8 SWG copper earth wire as per spec. | — | — | — | 15,32,500 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of 11KV outdoor Ring main unit, manual type, 630A, 20kA, 2 incomers and 2 output consisting of all VCB, as per specification | — | — | — | 7,86,574 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing & commissioning of 11KV 1000KVA outdoor type CSS consisting of 1 Nos.VCB at HT side 630A, 20KA, 1000KVA dry type transformer and 1600A ACB at LT side as per specification | — | — | — | 73,89,544 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing & commissioning of 440V, 400 KVAR indoor type APFC panel as per specification. | — | — | — | 16,92,640 | |
| — | 1.00 | — | — | ||
| SITC Battery charger 24 V. 200A with 2 Nos. 200AH SMF VRLA Batteries as per specification | — | — | — | 74,374 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of LT panel: 03 No. ACB 1600A FP EDO MP based motorized in incoming, 02 Nos. ACB 1600A FP EDO MP based motorized as Bus coupler, outgoing: ACB 8 No. FP EDO MP based motorized ACB 800A & 02 Nos. FP EDO MP based motorized ACB 1000A, as per specification. | — | — | — | 32,25,101 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of ATS 1600A as per specification. | — | — | — | 4,64,036 | |
| — | 100.00 | — | — | ||
| Supplying, installing by suspension on ceiling, testing and commissioning of capacity 2000A Isc=50kA for 1 sec, Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminum bus bars having current density of 130A/sqcm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every meter, adopter box and copper flexible for joints, continuous earthing with 2Nos. aluminum strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required | — | — | — | 41,55,700 | |
| — | 60.00 | — | — | ||
| Supply of name signage, backlit alpha-numeric signage for name plate as per specification in Hindi/English - size 6600x1200mms (Per word). | — | — | — | 4,32,120 | |
| — | 500.00 | — | — | ||
| Provision of cable tray for laying charging line cables as per specification. | — | — | — | 2,02,000 | |
| — | 20.00 | — | — | ||
| Supply fixing and commissioning of HT XLPE heat shrinkable type cable end box indoor type size 50 to 185 sqmm as per specification. | — | — | — | 1,23,980 | |
| — | 2.00 | — | — | ||
| SITC of change over switch 800A manual type as per specification. | — | — | — | 1,23,644 | |
| — | 1.00 | — | — | ||
| SITC of LT Panel 02 Nos. ACB 800A incoming, 06Nos. MCCB as outgoings as per specifications. | — | — | — | 4,70,866 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing and commissioning of air circulator wall mounting brackets fan blade 400 mm sweep similar to Crompton price MODEL no HIGH FLO or equivalent with fixing up at suitable height with foundation bolt and clamp etc as per requirement. Make shall be as per T.S. | — | — | — | 98,980 | |
| — | 50.00 | — | — | ||
| Mushroom shape integral decorative LED bollard with opal acrylic as per specification. Make as per reference list. | — | — | — | 2,90,750 | |
| — | 50.00 | — | — | ||
| Supply, erection (with foundation/supporting structure), installation, testing and commissioning of 10W LED Bollard Light as per specification. Make shall be as per reference list. | — | — | — | 2,61,700 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing & commissioning of die-cast aluminium 50W LED flood light with toughened glass and high power LEDs and secondary lenses with IP66 protection suitable for highlighting architectural features as per specification. Make shall be as per reference list. | — | — | — | 1,34,460 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing & commissioning of 150W LED flood light with junction box, suitable for highlighting architectural facade and general purpose lighting with IP 66 Protections & with toughened glass and secondary lenses with IP66 protection. System efficacy 110/120LPW 10KV SPD included similar to Crompton model no. LFLN-150-CDL@ 47<45@M or equivalent. Make shall be as per T.S | — | — | — | 3,63,600 | |
| — | 400.00 | — | — | ||
| Design, Supply, fixing, testing and commissioning of Hot dipped Galvanized CABLOFIL wire mesh cable trays with a longitudinal 'T welded' safety edge except 30x50mm tray. Trays shall be IP66 protection. System efficacy 110/120LPW 10KV SPD included similar to Crompton model no. LFLN-150-CDL@ 47<45@M or constructed with 50X100 mm mesh configuration with all accessories including couplers (CE25/CE30 screw-based system combination), mounting accessories. The deflection of cable tray must be no more than 1/200th of the distance between two supports and tested in accordance with the standard IEC 61537. Wire cable trays must be designed with an optimum span of 1.5 m, taking into account the maximum carrying capacity. Assemblies with specific fire-resistant properties. Rod dia. must be from 3.9mm to 5.9mm. | — | — | — | 5,38,800 | |
| — | 10.00 | — | — | ||
| Supplying & fixing 63A 4P MCB as per specification. | — | — | — | 16,920 | |
| — | 10.00 | — | — | ||
| Supply, erection, testing and commissioning of Flying Insect Control 18 watt. | — | — | — | 48,550 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing and commissioning of Bajaj model no. BJPL 01 300 Black painted galvanized pole in different section and gold colour painted decorative rings. Or equivalent make from reference list. | — | — | — | 5,80,360 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing, commissioning of BGCT 40W LED post top as per spec. | — | — | — | 1,27,860 | |
| — | 70.00 | — | — | ||
| Supply, fixing, testing and commissioning of storage geyser 25 litter capacity from approved makes. The geyser shall be rated 3 star or above as per specification. | — | — | — | 2,66,980 | |
| — | 60.00 | — | — | ||
| Provision of single-phase electronic meter 0-20 Amp | — | — | — | 70,800 | |
| — | 60.00 | — | — | ||
| Provision of meter box for single phase meter PVC/M.S. with two no. single pole MCB. | — | — | — | 42,120 | |
| — | 9.00 | — | — | ||
| Supply & providing three phase electronic meter 3x240V AC 50Hz of suitable rating, as per spec. | — | — | — | 18,711 | |
| — | 9.00 | — | — | ||
| Supply & providing meter box suitable for three phase electronic meter, as per spec. | — | — | — | 10,818 | |
| — | 9.00 | — | — | ||
| Supply, fixing, testing and commissioning of 32 to 40 Amp. TP MCB C-curve 10KA in existing meter box as per spec. | — | — | — | 11,097 | |
| — | 250.00 | — | — | ||
| Supply & fixing of Bakelite sheet 6mm thick with suitable reg bolt/fasteners and proper fixing in all respect. | — | — | — | 37,250 | |
| — | 10.00 | — | — | ||
| Supply, install, test & commissioning of Reading/Bed light LED approx. 3W. As per specification. | — | — | — | 4,920 | |
| — | 4.00 | — | — | ||
| Shifting of LT panel, including, removing from existing location, transportation loading unloading and installation at new location is including required brick/cc foundation, connecting and commissioning. | — | — | — | 18,040 | |
| — | 2.00 | — | — | ||
| Dismantling of 0.44/11/33KV Iron pole/H-Pole and deposit the released material to JVVNL/AVVNL/JDVVNL/Railway store as directed by the site Engineer. As per specification. | — | — | — | 21,996 | |
| — | 20.00 | — | — | ||
| Supply, fixing & commissioning of 300 mm sweep exhaust fan with louver shutter. As per specification. | — | — | — | 31,220 | |
| — | 20.00 | — | — | ||
| Supply, fixing and connecting modular type exhaust fan 225/250mm as per specification. | — | — | — | 19,440 | |
| — | 100.00 | — | — | ||
| Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 450 mm width X 50 mm depth X 2.0 mm thickness. | — | — | — | 1,15,600 | |
| — | 300.00 | — | — | ||
| Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.a) 300 mm width X 62.5 mm depth X 2.0 mm thickness. | — | — | — | 2,82,900 | |
| — | 200.00 | — | — | ||
| Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness. | — | — | — | 1,22,800 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderAWRT01-26-27.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
Correction Slips
ATTACHMENT
JPO_3.pdf
ATTACHMENT
GCC-2022ACS1to11_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].