CERTAIN REPAIR MAINT OF INTERNAL ELECTRIFICATION OF OTM AND MD ACCN UNDER GE (WEST) JRC

Amount

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors

Taking down unserviceable Submain of any size as directed by Engineer-In-Charge.

Taking down main switch / DB as directed by Engineer-In-Charge.

M&L for point wiring with 1.5 sqmm, PVC insulated but sheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respective items) (a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push.

(b) One socket outet point 5 amps on the same board.

(c) One socket outet point 5 amps on the independent board.

All as Ser item 4 here in before but with 2.5 sq mm wire and earth wire (green colour) of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet.

Supply and fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 4 module complete all as specified and directed.

Supply and fixing modular metal flush box 6 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular metal flush box 12 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed.

Supply and fixing modular Dummy plate complete all as specified and directed.

M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified :- One light / fan / call bell point controlled by one, one way switch.

All as per Ser item No 22.00 above but for 6 amps socket on independent board

All as per Ser item No 22.00 above but for 6 amps socket on same board

All as per Ser item No 22.00 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC

S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC

S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts

S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts

S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed.

S & F MODULAR Bell push 06 Amp 01 Module complete all as specified and directed.

Supply & fixing switch piano flush type single pole one way 6 Amps all as specified.

Supply & fixing socket outlet 6 Amp flush button type all as specified.

Supply & fixing switch piano flush type single pole 16 Amps.

Supply & fixing socket outlet 6 pin 6/16 Amps multi type.

Supply and fix in repair electronic regulator step type 240 V, 120 W , all as as per existing make & model/ as per sample .

Supply & fixing bell electric (dingdong) 230 volt, SP

M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 9W all as specified.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

M & L for sub main wiring with four single core PVC insulated and unsheathed cable 10 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 2 run of 10 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.

Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates conforming to Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and fix MCCB 100 Amps 4 pole 415 Volt,25 KA breaking capacity conforming to Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed .

Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus bars , Neutral links , blanking plates conforming to Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed. all as specified and directed.

S/F MCB TPN 40 Amps 415 volts as per Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and fix Sheet metal DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar , neutral bar / connectors suitable copper thimbles , lugs etc complete all as specified and directed. Make : EKINOX3 series of Legrand/Acti 9 metalic series of Schneider /Osafe series of HPL/Metallica of Havells/Hager/L&T/Siemens

S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type conforming to Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type conforming to Osafe of HPL / Acti 9 series of Schneider /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.

Supply and fix of Microwave Sensor enabled Integral LED 4 ft luminaire with extruded housing and Opal diffuser ith ABS end caps. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at least 100 lumen/watt with a maximum system wattage of 20 Watts. Fixture should cover upto 5 mtr sensor radius coverage area with 120 degree angle after 17 to 30 seconds & 30% light output in case of non-occupancy.The electronic driver used shall have a power factor >0.9 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have in house lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters complete all as specified and directed .. Havells Cat no LUMILINESMART20WLED865PCWH equivalent in Signify/Wipro

S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.

S&F LED mirror light fitting 10W Slim type 2 feet all as specified and directed.

Supply & fixing decorative wall light fixture made up of polycarbonate, with suitable 01x 10 watt LED Bulb .

Supply and fix of hexagon shaped LED bulkhead industrial luminaire with Pressure die cast housing and Polycarbonate diffuser and silicon gasket. The luminaire should have a color CRI > 80, and CCT of 5700K. The luminaire shall be compliant with IP66 & IK 10 classification. Luminaire shall be designed to emit at least 1000 nominal lumens at a system efficacy of at least 100 lumen/watt with a maximum system wattage of 10 Watts. The electronic driver used shall have a power factor >0.95 and THD <15% and suitable for an operating voltage range of 180-270V AC and 4 Kv inbuilt surge protection. Manufacturer shall have in house lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Havells Cat no HEXAFT10WLED857SSYMBOPC equivalent in Signify/Wipro

Supply and fix of Recess LED 2x2 PIR based luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of both 5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 4250 nominal lumens and an outstanding System efficacy of atleast 115 lumen/watt and maximum system wattage of 36 Watts. In up position sensor will work with detection range of 3m & in down position sensor will work with detection range of 6m. Time delay options should be 5s, 30s, 1min, 5min, 8min.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% with 3 KV internal surge protection and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters complete all as specified and directed . Havells Cat no VENUSNEOHE2X2R36WLED857PIRSENSOR equivalent in Signify/Wipro.

S & F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed.. Havells Cat no ENDURASUNBEAMSL45WLED757SASYTOPCSENSO equivalent in Signify/Wipro

S & F LED bulb 12 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified

Supply and fix PVC Conduit pipe heavy duty of size 32mm with all accessories complete all as specified and directed.

Taking down existing Ceiling fan/Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed.

Taking down existing Geyser any capacity/type carefully and refixing the same with replacement of PVC connection/Steel connection and anchor fastener pipe if required complete all as specified and directed.

Taking down existing electric/electronic energy meter any capacity/type carefully all electric wire/submain complete and refixing the same, incl electric connection with new gutties/anchor fastener if required complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I

B D BATRA AND SONS (BID ID -3189342)