REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED FLOOR AND WALL TILES AND ALLIED WORKS, REPAIRS TO FLOORING, SUNKEN AND ALLIED WORKS AT BASARA ENCLAVE, REPAIR/MAINT INCL REPLACEMENT OF DAMAGED INTERNAL WIRING IN OMQ/ARJAN AREA AND REPAIR/MAINT INCLUDING

Amount

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base, flooring etc., complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘orissa’ pattern, size 630x 450mm white, with integral foot rests, and lime concrete bedding etc. (excluding flushing cistern and flush pipe), complete all as specified and directed

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 580x 450mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 25mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection, medium grade, 15mm bore with all fittings fixed to wall and ceiling or laid in floors, complete all as specified and directed..

S&F 20mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 25mm dia CPVC pipes SDR-11 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F in repair pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and directed.

S&F in repair bib tap 15mm bore, fancy type, chromium plated, with crutch or butterfly handle, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore bib taps, two way, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipes or for unions, complete all as specified and directed.

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in repair CP shower arm 15mm bore, 195mm long with bend of 45 degree with flangs, brass, chromium plated, with long head arm for fixing with 15mm bore steel pipe or union, complete all as specified and directed.

S&F PVC connection 15mm size of length 600mm with PTMT nuts, complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink, 800mm long, complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore and fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure, screwed for iron pipe & fixed (minimum weight 90gms), complete all as specified and directed.

S&F in repair 150mm dia gratings of PTMT (Minimum weight 50gms), complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole/stay, or cable trenches etc and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

S&F GI tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches including making good to the distrurbed surface including taking down/up old unserviceable pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including taking down old unserviceable UG cable of any description, complete all as specified and directed.

All as per item No 37.00 here-in before but 35 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 37.00 here-in before but 50 Sqmm 3.5 core, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3cm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20mm bore and watering pipe GI medium grade of 20mm bore and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion including demolition of old unserviceable earthing of any description, complete all as specified and directed. Notes : (i) Proper earthing pit should be provided with pit cover. (ii) GI earth wire ufrom earth pit to pole/panel/DB shall be included in the unit rate.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of outdoor type LT bus bar box, factory made, of size not less than 900mm (L) x 900mm (b) x 450mm (d) of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15 mm thick CRCA sheet mounted on 40 x 40 x 5mm angle iron supports at the base duly painted with synthetic enamel paint (spray painting) and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply, including suitable size cable glands, lugs etc, in proper arrangement for ventilation, including taking down of old unserviceable bus bar box, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, fixed in proper position including taking down old unserviceable one, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, fixed in proper position including taking down old unserviceable one, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, fixed in proper position including taking down old unserviceable one, complete all as specified and directed.

S&F Isolator four pole capacity 100 Amps, 415 Volts fixed in proper position including connecting wire as per site requirement, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 6.0 sqmm single core FRLSH PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit (ISI marked) medium duty and accessories of not less than 25mm size including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 6.0 sqmm single core PVC insulated unsheathed copper earth continuity including making good disturbed surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed. (Note: Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.)

All as per item No 49.00 here-in before but drawn through and including PVC casing caping (ISI marked) heavy duty, including its accessories, complete all as specified and directed.

All as per item No 49.00 here-in before but sub main wiring with 4.0 Sqmm in PVC casing caping, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall/blocks/slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

S&F in replacement of front door of MCB DB upto 12 way including jointing/fixing properly on wall and tightening all connection, complete all as specified and directed.

M & L for removing of flashed carbon from distribtion box any type and size by cleaning with cleaning agent properly and replacement of burnt out parts like spreader link, bottle lugs, of suitable size, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including PVC casing caping (ISI marked) , heavy duty of adequate size including its accessories not less than 20mm dia rigid PVC conduit 'medium grade ISI marked including all conduit accessories including pressed steel terminal box of required size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point/bell point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 56.00 here-in before but one 3 pin 5 Amps socket point on the indepandent board, complete all as specified and directed.

All as per item No 56.00 here-in before but one 3 pin 5 Amps socket point on the same board controlled by another switch, complete all as specified and directed.

All as per item No 56.00 here-in before but point wiring with 2.5 sqmm FRLSH type copper cable and 2.5 sqmm FRLSH type earth continuity copper conductor for 3 pin / 5 pin 16 Amps socket, complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F in repair switch and socket combination 2 in 1, 6A flush type, complete all as specified and directed.

S&F in repair switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F in repair fan regulator, deluxe rotary step type, complete all as specified and directed.

S&F in repair bell, AC 230 volts, single pole , complete all as specified and directed.

S&F in repair angle lamp holder, PVC/polycarbonate type, complete all as specified and directed.

S&F in repair bell push 5 amp flush type, complete all as specified and directed.

S&F in repair ceiling rose, surface bakelite PVC/polycarbonate, isolated body with three terminals, complete all as specified and directed.

S&F in repair LED tube 40 W tube light fitting LED batten with square profile extruded and polycarbonate frame connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length, complete all as specified and directed.

S&F in repair LED tube 20 W tube light fitting LED batten with square profile extruded and polycarbonate frame connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length, complete all as specified and directed.

S&F in repair LED tube 10 W tube light fitting LED batten with square profile extruded and polycarbonate frame connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length, complete all as specified and directed.

S&F in repair 12 W down light fitting LED with round profile (circular shape) extended, suitable for fixing in ceiling/recess mounted, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length, complete all as specified and directed.

S&F in repair, plug top 15 Amp, complete all as specified and directed.

S&F in repair bell push 5 Amp, complete all as specified and directed.

S&F in repair modular type, one way, 6 Amp, 1 module, completes all as specified and directed.

S&F in repair modular type, one way, 16 Amp, 2 module, completes all as specified and directed.

S&F in repair modular type, bell push, one way, 6 Amp, 1 module, completes all as specified and directed.

S&F in repair modular type, 05 way, 6 Amp, 2 module, completes all as specified and directed.

S&F in repair modular type, 03 way, 16 Amp, 2 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 1 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 2 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 3 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 4 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 6 module, completes all as specified and directed.

S&F in repair modular type, cover plate, 8 module, completes all as specified and directed.

S&F in repair modular type, surface mounting plastic box of size 3 x 3, 1 & 2 module, completes all as specified and directed.

S&F in repair modular type, surface mounting plastic box of size 4 x 3, 3 module, completes all as specified and directed.

S&F in repair modular type, surface mounting plastic box of size 5 x 3, 4 module, completes all as specified and directed.

S&F in repair modular type, surface mounting plastic box of size 6 x 3, 6 module, completes all as specified and directed.

S&F in repair modular type, surface mounting plastic box of size 8 x 3, 8 module, completes all as specified and directed.

S&F MCB Double Pole (DP) of capacity 40 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F in replacement of blanking plate suitable for DBs/modular box, completes all as specified and directed.

S&F in replacement of LED lamp 9/10 watt, B22 base, completes all as specified and directed.

S&F in power unit suitable for load max up to 3.5 KW including sockets 25 Amps and 6 module box for mounting of power unit and power socket, completes all as specified and directed.

Note: An amount of Rs.46,590.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION

M/S ANIL KUMAR BAUL

M/S MANODEEP CONSTRUCTION

M/S SANMILAN NANDI

CONSTRUCTION SHELTER

MAJUMDER ENTERPRISE